• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.7
• /
• pp.110-116
• /
• 1994

In this paper a Duty Effective Overlap Scanning method (DEOS) for the improvement of driving efficiency of LC displays which have the RMS voltage responding characteristics is proposed and new processing method of data signals for optimum application of this method is also proposed. Proposed method has a few advantages such as the increment of duty ratio the increment of driving power loaded on LC cell and the decrement of RMS voltage error rate caused by signal attenuation on electrodes composing of display when compared with the conventional method which is called as optimum voltage amplitude selection method. And also by adopting new data signal processing method which has 3 kinds of voltage levels additional advantage much improving crosstalk phenomenon which is the most serious problems of simple matrix structured display is obtained. For the characteristic estimation new mathematical representation for new overlap scanning method and data signal processing method are induced and defined. And by the defined formula and simulation the characteristics of the proposed method and the conventional method are compared and analyzed. As a result of estimation this new method being able to optimize the overlap rate of scan signal and using 3 levels of data signals has the characteristic which can improve the driving efficiency of LC displays.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.3
• /
• pp.109-118
• /
• 2016

The present paper proposes a method that can estimate a roll rate of spinning vehicles utilizing GPS receivers. The proposed method analyzes a relation between received signal and correlation value and utilizes a phenomenon that received signal power that changes according to a signal incident direction affects a correlation value. That is, a roll-rate estimation method using zero crossing detection method for correlation value, which has sinusoidal periodicity according to rotations of vehicles, is proposed. A correlation value in real environments experiences a jitter so that the proposed method includes a pre-processing filter and detection threshold setting way is also considered to reduce the effect of received signal power. In order to verify the operation of the proposed method and analyze the performance, a signal generator and software-defined receiver (SDR) are designed. The signal generator generates intermediate frequency (IF) signal by taking the rotation of vehicles, antenna gain, and signal power into consideration, and a correlation value is acquired by taking the generated IF signals into consideration. Using the generated correlation value, the operation of the proposed roll rate estimation method is verified and the performance is analyzed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.6
• /
• pp.483-489
• /
• 2016

This paper proposes a repeat-back jamming signal detection scheme that utilizes a combined pseudo random noise signal that is effective for processing a global positioning system (GPS) repeat-back jamming signal with the early minus late phase scheme to alleviate any existing multipath signal detection. The proposed scheme uses the combined pseudo random noise signal to treat repeat-back jamming signals like similar multipath signals and can effectively detect a repeat-back jamming signal by applying the early minus late phase scheme to a combined pseudo random noise signal. Through a Monte-Carlo simulation, the detection probability of the proposed scheme is better than the one of the conventional scheme under low jamming to signal power ratio.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.6
• /
• pp.372-381
• /
• 2014

This study examined a radar signal active cancelation technique, which is a theoretical way of achieving stealth by employing a baseband process that involves sampling the incoming hostile radar signal, analyzing its characteristics, and generating countermeasure signals to cancel out the linear-FM signal of the hostile radar signal reflected from the airborne target. To successfully perform an active cancelation, the effects of errors in the countermeasure signal were first analyzed. To generate the countermeasure signal that requires very fast and accurate processing, the down-sampling technique with the suboptimal maximum likelihood estimation (sMLE) scheme was proposed to improve the speed of the estimation process while preserving the estimation accuracy. The simulation results showed that the proposed down-sampling technique using a 2048 FFT size yields substantial power reduction despite its small FFT size and exhibits similar performance to the sMLE scheme using the 32768 FFT size.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.38-46
• /
• 2006

A parallel analog Viterbi decoder which decodes PRML signal of DVD has been fabricated into a VLSI chip. The parallel analog Viterbi decoder implements the functions of the conventional digital Viterbi decoder utilizing the analog parallel processing circuit technology. In this paper, the analog parallel Viterbi decoding technology is applied for the PRML signal decoding of DVD. The benefits are low power consumption and less silicon consumption. The designed circuits are analysed and the test results of the fabricated chip are reported.

• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.2
• /
• pp.31-36
• /
• 2017

This study aims to develop an BCI speller utilizing eye-closed and double-blinking EEG based on asynchronous mechanism. The proposed system comprised a signal processing module and a graphical user interface (virtual keyboard-VK) with 26 English characters plus a special symbol. A detected "eye-closed" event induces the "select" command, whereas a "double-blinking" (DB) event functions the "undo" command. A three-class support vector machine (SVM) classifier involving EEG signal analysis of three groups of events ("eye-open"-idle state, "eye-closed", and "double -blinking") is proposed. The results showed that the proposed BCI could achieve an overall accuracy of 92.6% and a spelling rate of 5 letters/min on average. Overall, this study showed an improvement of accuracy and the spelling rate resulting from in the feasibility and reliability of implementing a real-world BCI speller.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.9-15
• /
• 2006

In this paper, signal processing techniques for noncoherent impulse-radio-based UWB (IR-UWB) communication system are proposed to provide system implementation of low power consumption and low complexity. The proposed system adopts a simple modulation technique of OOK (on-oft-keying) and noncoherent signal detection based on signal amplitude. In particular, a technique of a novel high speed digital sampler using a stable, lower reference clock is developed to detect nano-second pulses and recover digital signals from the pulses. Also, a 32 bits Turyn code for data frame synchronization and a convolution code as FEC are applied, respectively. To verify the proposed signal processing techniques for low power, low complexity noncoherent IR-UWB system, the proposed signal processing technique is implemented in FPGA and then a short-range communication system for wireless transmission of high quality MP3 data is designed and tested.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.1
• /
• pp.1-9
• /
• 1980

In this paper several basic techniques for signal processing and analysis are surveyed. Firstly by the intervention of the uncertainty principle, an equality sign may have different degree of precision if non commutable operators are applied. Seconds y maximum entropy estimate and randam process based viewpoint must be enhanced to get rid of the well established and reigning deterministic image of science. Thirdly techniques for the analysis of a signal namely detection. ess]motion and modulation are explained as well as the positive definiteness of a covariance function, Karhunen-Loeve expansion and SVD of an image.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.6
• /
• pp.1-10
• /
• 1979

Recent progresses in the signal processing technique in digital domain as well as that of analogue, impose a heavy burden on scientists and engineers intending to study this dis cipline, we surveyed basic tools for these vast branches to help those who have concerns on this field without being buried in detailed techniques. The first article is naturally confined to the basic tools namely random process analysis and characterization of random signal by covariance function.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.45-49
• /
• 1985

This paper presents a simple method for drastic reduction of computational requirement for realization of the quasi.noise alone reference (QNAR) estimation of noise power. (1 ) The new estimator docs not bring forth performance degradation, as shown by extensive computer simulations, and is amenable to hardware implementation for certain real-time signal processing problems.