• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.20-28
• /
• 2018

The time synchronization of each sub-unit of a pulsed generator is important to generate an output high-power radio frequency (RF) signal. To obtain the time synchronization between an input RF signal fed by an external source and an electron beam produced by an electric pulse generator, the influence of different charging voltages on a delay and a rise time of the output pulse waveform in the electric pulse generator should be carefully considered. This paper aims to study the timing characteristics of the delay and the rise time as a function of different charging voltages with a peak value of less than -35 kV in the high-voltage pulse generator, including a trigger generator (TG) and a pulse-forming line (PFL). The simulation has been carried out to estimate characteristics in the time domain, in addition to their output high-voltage amplitude. Experimental results compared with those obtained by simulation indicate that the delay of the output pulses of the TG and PFL, which are made by controlling the external triggering signal with respect to different charging voltages, is getting longer as the charging voltage is increasing, and their rise times are inversely proportional to the amplitude of the charging voltage.

• 전기학회논문지
• /
• 제59권8호
• /
• pp.1449-1455
• /
• 2010

The excitation control system of an emergency diesel generator is classified as a kind of safety-related system. Compared with other control systems in a power plant, this system is required to be more reliable and have better performance. In this paper, the digital multi-redundant excitation system for a diesel generator was proposed. The signal processing system of the proposed system makes high speed signal processing and arithmetic in excitation control possible. The improved soft start algorithm and multiple PI parameters adaptation considering the diesel generator characteristics were implemented in the proposed system. The developed system was applied to a nuclear power plant successfully.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.352-361
• /
• 2017

This paper proposes a design and fabrication of the test equipment that is implemented as a part of the airborne tracking radar inspection under the environment of indoor simulation. This test equipment provides controlling the operation status of airborne tracking radar and replicating the velocity and range information of target by generating a variety of target signal. This is mainly composed of radar operation controller, target signal generator, horn antenna driving devices. Radar operation controller is able to perform the controlling of radar operation mode and monitoring in real time by serial communication. Target signal generator is generated doppler signal and range delayed signal using virtual target of RF-band. Horn antenna driving devices perform a role of target simulating exercise. In the end, the performance is demonstrated using experiment results of test equipment for airborne tracking radar.

• 한국위성정보통신학회논문지
• /
• 제9권1호
• /
• pp.13-16
• /
• 2014

최근 TFT-LCD TV를 구동하는데 있어서 비발광소자인 LCD의 응답특성을 개선하기 위해서 많은 연구가 진행되고 있다. 특히 기존의 1 Frame 의 시간주기를 보다 작게 나누어 구동하는 방법에 대해서 많은 연구가 진행되고 있으며, 이 경우 화면을 구성하는 데이터의 양이 많이 소요됨과 동시에 드라이버 IC의 구동 속도가 문제가 되고 있다. 기존의 차동신호를 바탕으로 한 TFT-LCD 구동신호는 이러한 문제에 대응하는데 문제가 있으며, 본 연구에서는 Full HD를 Quad 쌍으로 구동하는 고속 구동을 위해서 기존의 신호전송방식이 가지고 있던 많은 입력선 수를 효과적으로 줄이기 위해서 직렬 데이터 전송방식의 Full HD Generator 를 제작하여 평가하는데 목적을 두었으며, 평가 결과 육안으로도 잔상이 없는 고속구동이 가능한 직렬 데이터 방식의 구동 설비를 제작할 수 있었다.

• 한국산업융합학회 논문집
• /
• 제21권5호
• /
• pp.235-240
• /
• 2018

The generator of an automobile supplies electric voltage and current for various electric components. The supplied voltage can be changed by sudden variation of the electric load. The voltage was controlled by independent power supply in the study. The TPS and APS signal was changes as the voltage of the power supply. The ECU output voltage and OBD signal voltage was changed also as the variance of the power supply.

• 한국통신학회논문지
• /
• 제23권5호
• /
• pp.1349-1359
• /
• 1998

본 논문에서는 디지털 FM 스테레오 합성 신호 발생기(FM stereo composite signal generator)의 구현 결과를 제시하였다. 직접 디지털 주파수 합성기(DDFS)를 응용하여 단일 칩으로 디지털화 하였으며, $1.0\mu\textrm{m}$ CMOS 게이트­어레이 기술로 구현하였다. 설계 결과는 시뮬레이션을 통해 신호 발생 과정을 검증하였고, 디지털 칩을 실장한 평가용 인쇄회로기판을 제작하여 신호 발생 값을 비교 분석하였다. 측정 결과 디지털-아날로그 변환기의 비트 수가 12비트일 때 신호 대 잡음비가 74dB가 측정되었으며, 이는 아날로그 회로보다 14dB 더 우수한 것이다. 범용 스테레오 입출력으로 16비트 디지털-아날로그 변환기를 사용할 경우 아날로그 방식보다 훨씬 우수한 스펙트럼 순수도를 얻을 수 있을 것으로 기대한다. 디지털 FM 스테레오 합성 신호 발생기는 신호 대 잡음비, 정확도, 튜닝 안정성,그리고 집적도측면에서 기존의 아날로그회로보다 우수한 특성을 보인다.

• 한국전자파학회논문지
• /
• 제27권9호
• /
• pp.865-871
• /
• 2016

본 논문에서는 차량 레이다 사이의 상호 간섭 영향 평가를 위하여 77 GHz 대역 레이다 간섭 신호 발생기를 설계하였다. 개발한 간섭 신호 발생기는 기준신호 발생기와 77 GHz 대역 송신기로 구성된다. 기준신호 발생기는 상용 칩과 보드를 사용하여 2.75 GHz의 톱니파, 삼각파, 임의 주파수 호핑과 같은 다양한 변조 신호를 발생시키며, 77 GHz 송신기는 변조된 기준신호를 28 체배하여 77 GHz 대역의 신호를 발생시킨다. 77 GHz 송신기에 사용한 칩은 65 nm CMOS 공정을 이용해 자체 제작하였으며, 칩 상에 도파관 급전기를 내장하여 혼 안테나를 직접 구동할 수 있다. 송신기의 주파수 대역은 75.6~77 GHz이며, 출력 전력은 7.31~8.06 dBm이다.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.102-107
• /
• 2015

In this paper, the generator control system by using PSCAD/EMTDC was modeled and several faults simulation were performed. The generator control system is composed of generator, turbine, exciter and governor. The parameters of generator control system model were obtained from field power plant. And then, the various transient phenomena through obtained several signal of developed modeling were analyzed.

• ETRI Journal
• /
• 제30권2호
• /
• pp.249-254
• /
• 2008

In this paper, we demonstrate an electrically band-limited carrier-suppressed return-to-zero (EB-CSRZ) signal generator operating up to a 10 Gbps data rate comprising a single-stage Mach-Zehnder modulator and a wideband signal mixer. The wideband signal mixer comprises inverter stages, a mixing stage, and a gain amplifier. It is implemented by using a 0.13 ${\mu}m$ CMOS technology. Its transmission response shows a frequency range from DC to 6.4 GHz, and the isolation response between data and clock signals is about 21 dB at 6.4 GHz. Experimental results show optical spectral narrowing due to incorporating an electrical band-limiting filter and some waveform distortion due to bandwidth limitation by the filter. At 10 Gbps transmission, the chromatic dispersion tolerance of the EB-CSRZ signal is better than that of NRZ-modulated signal in single-mode fiber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3120-3122
• /
• 1999

In this paper we have designed the signal processing system for driving the Poly-Si TFT LCD of EWS. The signal processing system consist of timing controller, ramp signal generator and video signal processing system. Timing controller includes the top-down inversion. left right inversion, left-right shifting and control signal generator according to multi-source signal. The video signal processing system generates sawtooth-shaped waveform by using PROM and DAC for multi-gray scales and implements gamma correction function for compensating the TFT-LCD nonlinear charcteristic of the TFT-LCD. Finally we have discussed the experiment results and its application according to the designed TFT-LCD driving system.