• 한국항공운항학회지
• /
• 제18권3호
• /
• pp.9-20
• /
• 2010

Surveillance is an enabler of safety with respect to aircraft separation and as a consequence capacity and efficiency with respect to aircraft operations. The new emerging technology among modern civil aviation surveillance is Multilateration (MLAT) which would affect on the surveillance capacity with both side of surveillance signal and operational properties. Multilateration system is needed to receive the signal which must reach at least 3 ground receivers simultaneously and has the effect that will have on with the ultimate accuracy. In this paper, the principle and the system configuration are reviewed. And its benefit of development is considered with use in situations where it is difficult to locate tranditional radar. This MLAT requires no additional avionics equipment to supply service with more accurate and less expensive. And it is able to enhance performance that meets international standards and extend the investment of air navigation service providers with reducing environmental impact by utilizing a small footprint on existing structures. Finally, it can be added to meet a wide range of coverage requirements and future surveillance needs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.203-205
• /
• 2005

A reactor protection system (RPS) plays the roles of generating the reactor trip signal and the engineered safety features (ESF) actuation signal when the monitored plant processes reach predefined limits. A Korean project group is developing a new digitalized RPS and the Cabinet Operator Module (COM) of the RPS which is used for the RPS integrity testing and monitoring by an equipment operator. A flat panel display (FPD) with a touch screen capability is provided as a main user interface for the RPS operation. To support the RPS COM user interface design, actually the FPD screen design, we developed a user interface style guide because the system designer could not properly deal with the many general human factors design guidelines. To develop the user interface style guide, various design guideline gatherings, a walk-though with a video recorder, guideline selection with respect to user interface design elements, determination of the properties of the design elements, discussion with the system designers, and a conversion of the properties into a screen design were carried out. This paper describes the process in detail and the findings in the course of the style guide development.

• 센서학회지
• /
• 제12권4호
• /
• pp.164-169
• /
• 2003

최근에 남북철도나 대륙횡단열차 등에 대한 사업성 타당조사가 이뤄지면서 철도차량에 대한 관심이 높아지고 있다. 타교통수단과 비교하여 철도차량은 환경친화적, 정시성, 신뢰성, 그리고 안전성의 특성이 있다. 우리는 한국형 고속철도차량을 평가하기 위한 하드웨어와 소프트웨어를 제작하였다. 소프트웨어는 측정된 데이터를 분석할 수 있도록 해준다. 이 논문에서는 센서를 사용한 철도차량 전기장치 측정에 관해서 연구하였다. 이 시험을 하기 위해서 신호변환시스템을 개발하였다. 이 계측시스템을 이용해서 가선전압, battery전압, 차축속도 등에 관한 중요한 시험결과를 얻을 수 있었다.

• 전기학회논문지P
• /
• 제53권2호
• /
• pp.70-76
• /
• 2004

The purpose of interlocking system in railway is to prevent the route for a train being set up and its protecting signal cleared if there were already another, conflicting route set up and the protecting signal for that route cleared. Recently, conventional relays circuitry in industrial field is replaced to computer-based control systems according to the advance of computer and communication technology. Therefore, interlocking systems in railway field are rapidly changing from existing relay-based interlocking system to computer-based electronic ones that executes the vital interlocking logic to assure the safety train routes at trackside signaling equipment room using electronic circuits. So it is very important to verify the performance of developed electronic interlocking system by plentiful laboratory testing before actually application in the railway system. However the laboratory testing in the present state of railway signaling is preformed individually by manual, so very much test time and cost are required. To solve these problems, we are developed the simulator for automatic interlocking inspection in this research. This simulator is able to operate on general personal computer and has following beneficial functions : automatic test sheet generation for inspection, automatic inspection execution and et al. The experiments are executed to test the feasibility of the developed simulator the experimental results have good agreements with the anticipated ones.

• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1088-1097
• /
• 2021

기계 장비의 진동 데이터는 필연적으로 노이즈를 포함하고 있다. 이러한 노이즈는 기계 장비의 유지보수를 진행하는데 악영향을 끼친다. 그에 따라 데이터의 노이즈를 얼마나 효과적으로 제거해주냐에 따라 학습 모델의 성능을 좌우한다. 본 논문에서는 시계열 데이터를 전처리 함에 있어 특성추출 과정을 포함하지 않는 Denoising Auto Encoder 기법을 활용하여 데이터의 노이즈를 제거했다. 또한 기계 신호 처리에 널리 사용되는 Wavelet Transform과 성능 비교를 진행했다. 성능비교는 고장 탐지율을 계산하여 진행했으며 보다 정확한 비교를 위해 분류 성능 평가기준 중 하나인 F-1 Score를 계산하여 성능 비교를 진행했다. 고장을 탐지하는 과정에서는 One-Class SVM 기법을 활용하여 고장 데이터를 탐지했다. 성능 비교 결과 고장 진단율과 오차율 측면에서 Denoising Auto Encoder 기법이 Wavelet Transform 기법에 비해 보다 좋은 성능을 나타냈다.

• 한국전산구조공학회논문집
• /
• 제21권6호
• /
• pp.615-632
• /
• 2008

교량 건전성 모니터링은 응답 데이터를 활용한 구조모델링기술, 신호분석, 정보처리 기술의 발전에 따라 손상추정 및 안전성평가와 함께 중요한 연구주제로 부각되었다. 교량 모니터링 시스템은 일반적으로 센서, 데이터 취득장비, 전송시스템 등과 같은 하드웨어와 신호처리, 손상추정, 전시 및 데이터 관리 등과 같은 소프트웨어로 구성된다. 본 논문에서는 교량의 건전도 모니터링을 위한 정보처리기술에 대한 연구 개발 활동을 정리하였다. 교량 건전성 모니터링의 과정에 대한 간단한 소개와 함께, 다양한 신호처리 및 손상추정 알고리즘을 포함한 정보처리기법에 대해서 소개하였다. 현 교량 건전성 모니터링 시스템에서의 주요 문제점과 향후 연구개발활동을 논의하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2252-2254
• /
• 2002

The Reactor internal structures which consist of many complex components are subjected to flow-induced vibration due to high temperature and pressure in Reactor coolant system. The above flow-induced vibration causes degradation of structural integrity of the Reactor and may result in loosing mechanical binding component which might impact other equipment and component or cause flow blockage. It is important to analyze reactor noise signal for the early detection of potential problem or failure in order to diagnosis reactor integrity in the point of view of safety and plant economics. Detailed composition of diagnostic system reactor internal structures using neutron noise(RIDS).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1451-1453
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on the 7 line that has been developed on the basis of the standardized type EMU for korea railway systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.82-87
• /
• 2005

The new technology with Wireless LAN (WLAN) is implemented to the railway system, which is attached importance to safety and reliability. Railway control system based on WLAN that is called CBTC (Communication Based Train Control) is being developed by the advanced nations in this field and The system is applied to a new train line and a renovation for outworn equipment. The CBTC system has many merits about increase of capacity, reduction of headway and cost reduction etc.. Therefore, that is come into spotlight to the advanced railway company and the companies have being developed the system. So, we have developed the CBTC system for standardization and localization of the railway signal system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.832-837
• /
• 2006

ATC facility manipulates ground-on-board information, which transmits speed limit, varying as wayside environments - safety facility, track gradient, inclination, bridge and tunnel and other factors, installed for safe operation of trains on wayside. Efficientiation and automatification of operation and maintenance is being realized, by measuring if there are any erroneous information, using a measuring car. In this paper, we study in priority the methods for measuring accurately distinctive properties of internal malfunctions of track circuits, the performance decrease of condensers, and the unbalance of return cables, which are actually required for functionality improvement of high-speed line signal measure facilities, by measuring the unbalance of return current given because of damaged factors of external track circuits.