• 전기학회논문지P
• /
• 제51권1호
• /
• pp.52-54
• /
• 2002

This research presented in this paper focuses on a system development for checking stator's wedge of large generator in heavy industry. The system is composed of impactor, A/D converter and digital signal processing board. Also this paper proposes a method for detection of stator's insulating state using analysis algorithm. As developed impact system is acting, impact wave is generated real time and transferred data to microprocessor. Using communication program this signal move microprocessor to hard directory of note book with 1000 data/sec. The developed system and analysis program performed very well by real stator's wedge in large generator.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.379-382
• /
• 2017

전 세계적으로 해운물류 안전 보안체계가 강화됨에 따라 국가물류보안 체계 구축을 위한 해운물류안전 보안 핵심기술 개발이 이루어지고 있다. 또한 미국에서 2018년 시행예정인 컨테이너 사전 100% 전수검사에 대응하기 위한 컨테이너 검색기의 핵심구성 요소인 Array 검출 System의 국산화 개발이 필요하다. 본 논문에서는 현재 자체 개발한 Test Digital 신호처리 Board를 가지고 TI-RTOS(Texas Instruments - Real Time Operating System)를 이용하여 개발한 Test Software Program을 제안한다.

• 대한전기학회논문지
• /
• 제40권8호
• /
• pp.836-844
• /
• 1991

PLC(programmable logic controller) system is widely used for the control of factory. PLC system receives ladder diagram which is drawn by the user to implement hardware logic, converts the ladder diagram into sequence program which is executable in the PLC system, and executes the sequence program indefinitely unless user breaks. The sequence program processes the data of on/off signal, and endures 1 scan delay and missing of pulse-type signal shorter than a scan time. So, data dependency doesn't exist. By applying theis characteristics to multiprocessor architecture, we design parellel PLC functionally and evaluate performance upgrade. Parallel PLC consists of central processing module, N general processing unit, and a shared memory by master-slave type. Each module executes allocated sequence program by the control of central processing module. We can expect performance upgrade by parallel processing, and reliability by relocation of sequence program when error occurs in processing module.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.379-385
• /
• 2020

The satellite employs an adaptive beamformer to efficiently detect various signals and to suppress multiple interference signals, simultaneously. Although the adaptive beamforming satellite system needs Angle-of-Arrival (AOA) information of the desired signal, it is difficult to estimate the signal AOAs on the satellite environment. However, the AOA estimation on the ground control tower is more efficient and accurate comparing to the satellite environment. In this paper, we propose an adaptive beamforming satellite system based on the signal location information on the ground, consisting on an angle estimator, an adaptive beamformer, and signal processing & D/B unit. The ground control tower estimates the accurate location of the signal source, and it sends the estimated coordinates of the desired signal to the satellite. The angle estimator mounted on the satellite calculates the desired signal AOA, based on the signal location information transmitted from the ground control center. The satellite beamformer detects the desired signal and suppresses unwanted signals based on the signal AOA calculated by the angle estimator. We provide computer simulation results to present the performance of the proposed satellite adaptive beamforming system based on the signal location information.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.828-831
• /
• 1996

Radiation monitoring system is needed at nuclear power plant and nuclear facility. Manual survey techniques are commonly used, but they are time consuming and somewhat inaccurate. Automatic radiation surveys are very important because it provides significant savings in men-rem and wages. Unmanned, remote automatic radiation measurement system should be small and light-weighted in order to mount on robotic system. The system we have developed consists of detection parts, signal processing part, interface, and software part. Position information is provided by using of a collimator. The measurement process is achieved by the scanning of detector and image processing techniques are used to display radiation levels. We designed collimators, detectors, signal processing circuit, and constructed prototype system. The goal of this system is the mapping of camera image and radiation level distribution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.31-32
• /
• 2006

A signal conditioning circuit for capacitive sensors was developed using a commercial single chip solution. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. Up to now, several companies already have succeeded in the development of the capacitive sensors system and they are commercially available in the market. In this research, to construct the signal processing circuits more easily and simply, we used a universal LVDT signal conditioner (AD698). Since the AD698 provides one chip solution for a basic signal processing including modulation and demodulation using various internal components, we can build the processing circuits successfully with minimal additional circuits: a compensation circuits for the drift caused by the bias current of OP amplifiers and a fine adjustment circuit for the elimination of nonlinearity. The signal processing circuits shows nonlinearity less than 0.05% in the comparison with a laser interferometer.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.6-11
• /
• 2011

Launch of the first Quasi-Zentih Satellite System (QZSS) satellite, dubbed Michibiki, took place September 11, 2010 and technical and application verification of the satellite is being carried out. This paper presents the results obtained from processing of the L5 signal transmitted from the QZSS satellite. The QZSS L5 signal is collected in ETRI, Korea. And then, the acquisition and tracking are performed by the L5 software receiver implemented by ETRI. The tracking loop of FLL, PLL, and DLL, the EPL correlator output, and the C/No output results show that the QZSS L5 signal is normally processed. Finally, the paper demonstrates that the QZSS L5 signal could be used as GPS satellite based augmentation system in Korea as well as Japan.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.114-117
• /
• 2002

The airborne tracking radar is located in front of aircraft or missile and measures and tracks a target motion. The signal processor receives target signals from a receiver using A/D converters, and calculates the target motion, and transfers the data to the aircraft or missile control unit. Since the signal processing system is required to be lightweight and small size as well as high performance to calculate and analyze the received signal, we use high speed DSPs and SMD type components having low power consumption. In this paper, we describe the design concept of signal processing system of the airborne tracking radar.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.890-893
• /
• 2014

본 논문에서는 자동적으로 충돌을 예방하는 선박용 레이더 시스템의 표적 탐지 및 추적 알고리즘, 충돌위험 계산 및 위험 경보 알고리즘을 개발하고 이를 적용시켜 일련의 동작을 수행하는 신호처리 보드부를 디지털 하드웨어적으로 구현하였다. 근거리에서 성능이 우수한 FMCW (Frequency Modulation Continuous Wave) 신호를 송신신호로 사용하고 1도 간격으로 빔포밍하는 기계식 스캔방식의 안테나 사용을 시뮬레이션 환경으로 설정하였다. 테스트보드는 DSP칩, FPGA 등으로 구성되며 이를 이용하여 개발된 알고리즘의 시뮬레이션을 수행하는 임베디드 시스템을 구현하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.97.1-97
• /
• 2002

$\textbullet$ Abstract $\textbullet$ Introduction $\textbullet$ Wire Rope Detecting System $\textbullet$ Signal Processing $\textbullet$ Experiment $\textbullet$ Conclusion $\textbullet$ Reference