• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.675-676
• /
• 2008

The computer based three phase power analysing system has been developed as a traveling standard for onsite power calibration. The system is utilized with digital-to-analog converts which were synchronized each other. Using digital signal processing technique the software has been developed to calculate power parameters. The calibration system is fully traceable to national standard system and, accuracy allows the calibration of industrial power measurement systems.

• Journal of Information Processing Systems
• /
• 제16권5호
• /
• pp.1034-1047
• /
• 2020

The personal authentication technique is an essential tool in this complex and modern digital information society. Traditionally, the most general mechanism of personal authentication was using alphanumeric passwords. However, passwords that are hard to guess or to break, are often hard to remember. There are demands for a technology capable of replacing the text-based password system. Graphical passwords can be an alternative, but it is vulnerable to shoulder-surfing attacks. This paper looks through a number of recently developed graphical password systems and introduces a personal authentication system using a machine learning technique with electroencephalography (EEG) signals as a new type of personal authentication system which is easier for a person to use and more difficult for others to steal than other preexisting authentication systems.

• 한국정보통신학회논문지
• /
• 제6권2호
• /
• pp.364-370
• /
• 2002

본 논문에서 일반 지폐 계수기에 권종구분 기능과 복수장 검출기능 그리고 위조지폐판별기 능을 부가시킨 지폐계수기를 구현하였다 권종구분에는 센서 신호처리기술, 위조지폐 판별에는 센서응용기술 및 정보처리 기술을 사용하였고, 고속계수에는 정밀기구설계 기술과 마이크로프로센서 응용기술을 사용하였다. 소프트웨어는 RTOS를 기반으로 한 C 언어를 사용하여 효과적인 제어 알고리즘과 실시간으로 신호를 처리함으로 써 디버깅 및 추가 하드웨어와의 접목이 어려운 점을 개선하였다. 센서 디바이스로는 하드웨어 비용절감과 처리속도를 감안하여 포토다이오드와 포토다이오드 응용제품, 그리고 자기저항센서를 사용하였다. 마이크로 콘트롤러는 Intel I8051 코어를 사용한 필립스사의 PCF 80C552-24를 사용하였다. 실험 결과 컬러복사 및 컬러 프린트로 만든 위폐가 잘 구분되는 것을 확인하였으며, 계수 중 이권종이 있을 경우 구분해 냄으로써 다른 지폐가 섞여 계수 되는 것을 방지 할 수 있었다.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1569-1573
• /
• 2008

본 논문은 핵발전소 증기발생기의 초음파 비파괴 검사용 프로그램 개발에 관한 것이다. 개발된 프로그램은 A, B, C, D-스캔과 같은 고전적인 해석방법뿐만 아니라 3차원 영상처리 기법을 이용하여 증기발생기 내부에 발생한 결함을 해석하고 검출할 수 있다. 결함의 3차원 영상은 핵발전소의 파이프라인으로부터 얻어진 1차원 초음파 데이터를 EMD(Empirical Mode Decomposition)로 분석해 결함의 위치를 구하고 voxel을 이용하여 구현하였다. 얻어진 3차원 영상은 2차원 해석방법을 사용하지 않더라도 결함의 위치, 형태, 크기 등과 같은 유용한 정보를 얻는데 용이하다. 개발된 프로그램은 이미 결함의 위치 및 모양, 크기 등을 알고 있는 시편의 측정에 사용하여 프로그램의 정확성을 검증하였고, 3차원 영상으로 결함의 입체적 모양을 구현하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.347-352
• /
• 2006

Narrowband interference can severely degrade the performance of GPS receivers. Detecting the presence of interference and then characterizing it can lead to its removal. Receivers can be reconfigured to focus on other signals or satellites that are less vulnerable to that interference at that moment. Using hardware reconfigurability of FPGA receivers and characterizing the effect of narrowband interference on the GNSS signal quality lead us to a new RFI mitigation technique in which the highest quality and less vulnerable signal can be chosen at each moment. In the previous work [1], the post processing capability of a software GPS receiver, has been used to detect and characterize the CW interference. This is achieved by passing the GPS signal and the interference through the correlator. Then, using the conventional definition of C/No as the squared mean of the correlator output divided by its variance, the actual C/No for each satellite is calculated. In this work, first the 'Exclusion zone' for each satellite signal has been defined and then by using some experiments the effects of different parameters like signal power, jamming power and the environmental noise power on the Exclusion zone have been analyzed. By monitoring the Doppler frequency of each satellite and using the actual C/No of each satellite using the traditional definition of C/No and actual data from a software GPS receiver, the decision to reconfigure the receiver to other signal can be made.

• Journal of Ubiquitous Convergence Technology
• /
• 제2권2호
• /
• pp.59-66
• /
• 2008

In this study, Software Defined Radio (SDR) technology-based digital filterbank architecture applicable to a multiple-channel processing system such as a wireless mobile communication system using Code Division Multiple Access (CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response (FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter (BPF) to reconfigure another system. The feasibility of the algorithm is verified by computer simulation and by implementing a multiple-channel signal generator that is reconfigurable to other system profiles, including those of a Wideband Code Division Multiple Access (WCDMA) system and a CDMA system.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.395-400
• /
• 2004

For the purpose of monitoring by ultrasonic test of the ball bearing conditions in rotating machinery, a system for their diagnosis was developed. ultrasonic technique is used to detect abnormal conditions in the bearing system. And various data such as frequency spectrum, energy and amplitude of ultrasonic signals, and ultrasonic parameters were acquired during experiments with the simulated ball bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was established. Bearing diagnosis system is composed of four parts as follows : sensing part for ultrasonic sensor and preamplifier, signal processing part for measuring frequency spectrum, energy and amplitude, interface part for connecting ultrasonic signal to PC using A/D converter, graphic display and software part for display of bearing condition and for managing of diagnosis program.

• 전기전자학회논문지
• /
• 제16권1호
• /
• pp.34-44
• /
• 2012

본 논문은 스트레인 게이지(strain gauge)식 로드셀(loadcell)의 대표적인 크립오차(creep error)에 대해서 디지털 신호처리방식을 사용한 실용적인 보상법(compensation method)을 제안한다. 신호의 보상방법은 로드셀의 출력응답을 실측해서 보상상수(시정수)와 보상계수를 결정한 후 마이크로프로세서의 내부메모리에 보상상수와 보상계수를 저장한 후 중량값을 디지털로 표시할 시점에 마이크로프로세서에서 연산처리한 크립에러 보상처리값을 로드셀의 출력신호에서 실측한 에러값과 서로 상쇠시키는 보상방법이다. 추가적으로 보상방법을 디지털전자저울에 직접 적용 시험하기 위해서 전용의 보상소프트웨어를 제작한 후 디지털전자저울의 크립특성을 실측해서 보상전 정격출력의 크립오차 0.03%의 로드셀을 정밀디지털전자저울의 허용오차 범위인 0.01%~0.001%이상으로 복잡한 연산처리 없이 정확하게 직접 보상처리하는 실용적인 방법을 제안했다.

• 제어로봇시스템학회논문지
• /
• 제21권6호
• /
• pp.583-588
• /
• 2015

Flexible tactile sensors can provide valuable feedback to intelligent robots regarding the environment around them. This is especially important when robots such as, service robots share a workspace with humans. This paper presents a contact force measurement algorithm of a flexible tactile sensor. This sensor is manufactured by a direct-writing technique, which is one 3D printing method, using multi-walled carbon nano-tubes. An analog signal processing circuit has been designed and implemented to reduce noise contained in the sensor output. In addition, a digital version of the Butterworth filter was implemented by software running on a microcontroller. Through various experiments, characteristics of the sensor system have been identified. Based on three traits, an algorithm to detect the contact and measure the contact force has been developed. The entire system showed a promising prospect to detect the contact over a large and curved area.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1250-1256
• /
• 2017

In this research, a high-performance ultrasonic positioning system is proposed to track the positions of an indoor mobile object. Composed of an ultrasonic sender (mobile object) and a receiver (anchor), the system employs three ultrasonic time-off-flights (TOFs) and trilateration to estimate the positions of the object with an accuracy of sub-centimeter. On the other hand, because ultrasonic waves are interfered by temperature, wind and various obstacles obstructing the propagation while propagating in air, ultrasonic pulse debounce technique and Kalman filter were applied to TOF and position calculation, respectively, to compensate for the interference and to obtain more accurate moving object position. To perform tasks in real time, ultrasonic signals are processed full-digitally with a Zynq SoC, and as a software design tool, Vivado IDE(integrated design environment) is used to design the whole signal processing system in hierarchical block diagrams. And, a hardware/software co-design is implemented, where the digital circuit portion is designed in the Zynq's fpga and the software portion is c-coded in the Zynq's processors by using the baremetal multiprocessing scheme in which the c-codes are distributed to dual-core processors, cpu0 and cpu1. To verify the usefulness of the proposed system, experiments were performed and the results were analyzed, and it was confirmed that the moving object could be tracked with accuracy of sub-cm.