• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.90-94
• /
• 2013

Research for Manchu character digitalization is at an early stage. This paper proposes a preprocessing algorithm for Manchu character recognition. This algorithm improves the existing Hilditch thinning algorithm so that it corrects thinning error for Manchu characters. The existing algorithm separates the characters into the left-hand side and right-hand side, while our alogorithm uses the central point between the points that strokes exist when it classifies each of characters. The experimentation results show that this method is valid for thinning and classification of Manchu characters.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.115-117
• /
• 2013

본 논문에서는 660nm 파장의 적색광과 940nm 파장의 적외선을 활용한 광전용적맥파(photoplethysmo graphy:PPG)를 기반으로 한 산소포화도 측정에 대하여 연구하였다. 본 논문에서는 기존의 한 손가락에서 서로 다른 두 파장의 광(光)을 번갈아 켜고 끄며 측정하던 산소포화도 측정방식과 달리 서로 다른 두 파장의 광을 각각 서로 다른 손가락에서 측정 한 후 각각의 광전용적맥파를 통하여 산소포화도를 측정할 수 있는 방법을 제안하였다. 이 방법은 동시에 한곳에서 측정할 때와 달리 서로 다른 두광을 Switching할 필요 없이 동시에 측정 가능하며 이를 통하여 서로 다른 곳에서 측정한 광전용적맥파를 이용하여 산소포화도 측정이 가능하다는 결론을 얻었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.49-52
• /
• 2003

Two types of ozone monitors using UV absorption method were tried in consideration of cost of the monitor and precision in measuring. The high concentration ozone monitor for high concentration real time ozone monitoring from ozone generator was composed of a low pressure mercury lamp as UV source, a photo multiplier tube as UV detector and signal processing unit for the most part. This structure could be very useful for low price high concentration ozone monitor due to simple system structure and fairly good monitoring characteristics. The developed system showed good linear output characteristics to ozone in the measuring concentration range of 0.05 and 2 wt.%. For accuracy ambient ozone monitoring in ambient in ppm level, the system composed of a high power pulsed xenon lamp as UV source, an optical spectrometer with a high sensitivity linear CCD array as UV detector and signal processing unit in brief speaking was proposed our study for the first time in the world. The developed system showed good linearity and sensitivity in relative low measuring range between 10ppm and 10,000ppm, and showed some feasibility of high resolution ozone monitor using CCD array as photodetector.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.263-272
• /
• 1994

The hardware and the software of the prototype telemtry system to monitor the behavior of the fish are designed. This system consistes of five parts I. e. three omni-directional hydrophones, three ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. The sensitivty of the hydrophones is -170dB(re 1V/$\mu$Pa), the gain and the 3dB receiving bandwidth of the ultrasonic receivers are 115dB and 1500Hz respectively, and the sampling period is 33.3$\mu$sec in the signal processing part. The positioning error of the system using hyperbolic method is estimated to be less than 0.2m in case that the pinger locates inside of the baselines. The perfomance of the system considering a practical use was examined by numerical simulation and a water tank test of a pinger tracking experiment. In results, the system developed in prototype was confirmed that it could be useful for monitoring the behavior of fish in the limited water area.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.235-238
• /
• 2003

In this study, we propose a method of digital control to drive the vibrating gyroscope using electromagnetic-force. The gyroscope requires accurate vibration control and signal processing for high performance. Conventional PLL based analog controller is not only difficult to manufacture but also weak to outer environment such as temperatures, air pressures and etc. But digital controller using DSP can consistently maintain the cylinder vibration and perform digital signal processing regardless of disturbance. DSP's PWM function was utilized to control the vibration, and rotation-detecting algorithm was developed. Finally, the controller was verified by simulation and experiment using rotation-rate table.

• Computers and Concrete
• /
• v.20 no.3
• /
• pp.257-262
• /
• 2017

This study aims to develop a signal processing scheme to accurately predict the thickness of concrete slab using air-coupled impact-echo. Air-coupled impact-echo has been applied to concrete non-destructive tests (NDT); however, it is often difficult to obtain thickness mode frequency due to noise components. Furthermore, apparent velocity in concrete is a usually unknown parameter in the field and the thickness of the concrete slab often cannot be accurately measured. This study proposes a signal processing scheme using guided wave analysis, wherein dispersion curves are drawn in both frequency-wave number (f-k) and phase velocity-frequency ($V_{cp}-f$) domains. The theoretical and experimental results demonstrate that thickness mode frequency and apparent velocity in concrete are clearly obtained from the f-k and $V_{cp}-f$ domains, respectively. The proposed method has great potential with regard to the application of air-coupled impact-echo in the field.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1449-1453
• /
• 1987

A microprogrammable Bit Slice Sinal Processor for image processing is implemented. Processing speed is increased by the parallelism in horizontal microprogram using 120bits microcode, pipelined architecture, 2 bank memory switching that interfaces with the Host through DMA, a variable clock control, overflow checking H/W,look-up table method and cache memory. With this processor, a DCT algorithm which uses 2-D FFT is performed. The execution time for $512{\times}512{\times}8$ image is 12 sec when 16 bit operation is runned, and the recovered image has acceptable quality with MSE 0.276%.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.77-83
• /
• 2003

This paper deals with a position control problem of a hydraulic proportional position control system using a nonlinear friction compensation control. As nonlinear friction, stiction and coulomb friction forces are considered and modeled as deadzone and external disturbance respectively. In order to compensate this nonlinearities, we designed the controller which is the adaptive friction compensator using discrete time Model Reference Adaptive Control method in this paper. Digital Signal Processing board is employed for data acquisition and manipulation. The experimental results show that response is slow and steady-state error cannot be compensated properly without friction compensation but this compensator is effective to obtain fast response and good steady-state response.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.65-72
• /
• 2002

In this study, actuator, sensor, guide, power transmission element and control method are considered for ultra-precision positioning apparatus. Through previous process, single plane X-Y stage with ultra-precision positioning is manufactured. Global stage for the purpose of materialization with robust system, is combined by using AC servo motor and ball screw and rolling guide. And ultra-precision positioning system is developed by micro stage with elastic hinge type and piezo element. global servo and micro servo for the purpose of materialization positioning accuracy with nm(nanometer) are controlled simultaneously by using incremental encoder and laser interferometer as displacement measurement sensor. Through previous process, ultra-precision positioning system(100mm stroke and $\pm$ l0nm positioning accuracy) with single plane X-Y stage are materialized.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.234-237
• /
• 1999

In this paper, a new method for identification of two-dimensional(2D) impulse response is presented. As is well known, identification of 2D impulse response is an important and necessary theme for image processing or signal processing. Here, the authors extend M-transform which has been proposed by some of the authors to 2D case where an image is used instead of signal, and M-array is used instead of M-sequence. Firstly, we show that 2D impulse response can be obtained by use of M-array. Next 2D M-transform is defined where any 2D image can be considered to be the output of 2D filter whose input is 2D M-array. Simulation results show the effectiveness of identification of 2D impulse response by either using M-array or by 2D M-transform.