• ETRI Journal
• /
• 제36권4호
• /
• pp.686-689
• /
• 2014

This paper studies energy-efficiency (EE) power allocation for cognitive radio MIMO-OFDM systems. Our aim is to minimize energy efficiency, measured by "Joule per bit" metric, while maintaining the minimal rate requirement of a secondary user under a total power constraint and mutual interference power constraints. However, since the formulated EE problem in this paper is non-convex, it is difficult to solve directly in general. To make it solvable, firstly we transform the original problem into an equivalent convex optimization problem via fractional programming. Then, the equivalent convex optimization problem is solved by a sequential quadratic programming algorithm. Finally, a new iterative energy-efficiency power allocation algorithm is presented. Numerical results show that the proposed method can obtain better EE performance than the maximizing capacity algorithm.

• 한국멀티미디어학회논문지
• /
• 제20권11호
• /
• pp.1803-1810
• /
• 2017

A large amount of processing time is required if the process of detecting the touch position on the touch screen and displaying it on the display panel is performed only by software. In this paper, we propose a method to output information touched on the screen using H/W method in order to improve the response speed delay. In the FPGA module designed for the HDMI signal output to the display module, the touch information is input to the serial data signal including touch coordinate information, point size, and color information. Then the module render the image using HDMI signal input to the module and the touch information. This method has a pipeline structure so it has effect of reducing the delay time that occurs in outputting the touch information compared with the conventional software processing method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.529-532
• /
• 2002

This research treated development of real time pitch tracer for training of musical tune of speech signal and pre-processing and post-processing technics were proposed to get higher accuracy in extraction of pitch. Autocorrelation Function was used to get pitch frequency from 64Hz to 980Hz in real time. Half Rectifier method and Envelop extraction method as a pre-processing was used to get higher accuracy in pitch detection, and improved results were obtained on noised speech signal. Post-processing method using periodicity of Autocorrelation was proposed to get higher accuracy in the high frequency region.

• BMB Reports
• /
• 제39권6호
• /
• pp.717-721
• /
• 2006

In vitro analyses of type I signal peptidase activities require protein precursors as substrates. Usually, these pre-proteins are expressed in vitro and cleavage of the signal sequence is followed by SDS polyacrylamide gel electrophoresis coupled with autoradiography. Radioactive amino acids have to be incorporated in the expressed protein, since the amount of the in vitro expressed protein is usually very low and processing of the signal peptide cannot be followed by SDS polyacrylamide gel electrophoresis alone. Here we describe a rapid and simple method to express large amounts of a protein precursor in E. coli. We have analyzed the effect of ionophors as well as of azide on the accumulation of expressed protein precursors. Azide blocks the function of SecA and the ionophors dissipate the electrochemical gradient across the cytoplasmic membrane of E. coli. Addition of azide ions resulted in the formation of inclusion bodies, highly enriched with pre-apo-plastocyanine. Plastocyanine is a soluble copper protein, which can be found in the periplasmic space of cyanobacteria as well as in the thylakoid lumen of cyanobacteria and chloroplasts, and the pre-protein contains a cleavable signal sequence at its N-terminus. After purification of cyanobacterial pre-apo-plastocyanine, its signal sequence can be cleaved off by the E. coli signal peptidase, and protein processing was followed on Coomassie stained SDS polyacrylamide gels. We are optimistic that the presented method can be further developed and applied.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1272-1277
• /
• 2010

표적 탐지 및 추적을 위한 무선 센서 네트워크에서 센서 노드는 다양한 신호처리 기능을 가져야 한다. 센서 노드의 에너지 제약과 통신 대역폭 제한은 센서 노드에서의 가벼운 신호처리 기법을 필요로 한다. 일반적인 센서 노드에서의 신호처리 기법은 센서 노드에 수신된 신호를 잡음제거와 같은 전처리를 수행하고, 에너지를 계산하여 표적의 위치를 탐지하고 기지국에서의 위치추정 및 식별을 위하여 특징 추출하거나 압축하여 전송하는 등의 방법으로 구성된다. 이러한 센서 노드에서 필수적인 신호처리 기법들은 무선 센서 네트워크의 생존 시간과 표적 탐지 및 식별 성능에 큰 영향을 끼치게 된다. 본 논문에서는 무선 센서 네트워크에서 센서 노드의 필수적인 신호처리들을 리프팅 스킴 웨이블릿 변환 방법을 이용하여 센서 노드에서 에너지 효율적인 신호처리를 수행하고 표적의 정확한 위치를 추정하는 방법을 제안한다.

• 대한임베디드공학회논문지
• /
• 제18권6호
• /
• pp.277-283
• /
• 2023

Vital signals provide essential information regarding the health status of individuals, thereby contributing to health management and medical research. Present monitoring methods, such as ECGs (Electrocardiograms) and smartwatches, demand proximity and fixed postures, which limit their applicability. To address this, Non-contact vital signal measurement methods, such as CW (Continuous-Wave) radar, have emerged as a solution. However, unwanted signal components and a stepwise processing approach lead to errors and limitations in heart rate detection. To overcome these issues, this study introduces an integrated neural network approach that combines noise removal, demodulation, and dominant-frequency detection into a unified process. The neural network employed for signal processing in this research adopts a MLP (Multi-Layer Perceptron) architecture, which analyzes the in-phase and quadrature signals collected within a specified time window, using two distinct input layers. The training of the neural network utilizes CW radar signals and reference heart rates obtained from the ECG. In the experimental evaluation, networks trained on different datasets were compared, and their performance was assessed based on loss and frequency accuracy. The proposed methodology exhibits substantial potential for achieving precise vital signals through non-contact measurements, effectively mitigating the limitations of existing methodologies.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.69-74
• /
• 1998

In order to monitor the tool wear in milling operation, cutting force is measured as the tool wear increased. The digital signal processing methods are used to detect the tool wear . As AR parameter extract the feature of tool wear , it can be used as input parameter of pattern classifier. The FFT monitor the tool wear exactly , but it can not do real time signal processing. The band energy method can be used to real time monitoring of tool wear ,but int can degrade the exact monitoring.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.25-28
• /
• 2001

A new decision-feedback equalization technique for a filter bank-based orthogonal frequency division multiplexing (OFDM) data transmission system operating in a frequency selective multipath fading channel is presented in this paper. At the cost of relatively increased computational complexity in comparison to the conventional OFDM systems, the proposed system achieves a better performance in terms of bit error rates. The simulation results confirm the superiority and robustness of our method, particularly, in the low SNR channel environment.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.225-228
• /
• 2001

대형 칼라 영상 기록물의 효과적인 계위적 인덱싱 특성을 갖는 방법을 제안하였다. 1차와 2차로 나누어진 칼라 키와 에너지 키 방법은 고속 검색 시스템의 성능을 발휘하며 질의 응답 시간면에서 DB의 크기에 별로 영향을 받지 않는 거의 일정한 응답 시간 특성을 갖는다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.199-202
• /
• 2001

In this paper, we propose new method of signal processing for the Pulse Oximeter for resistant motion artifact. When measure Oxygen saturation, today Pulse Oximeter is low reality because of patient moving, and it low difficult to filtering because of overlap Oxygen saturation and motion artifact. For we measure high reality Oxygen saturation, we reduces motion artifact. In this paper, we Propose and simulate method of signal processing for the Pulse Oximeter for resistant motion artifact.