• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.119-127
• /
• 1996

The proposed method uses a signal of the smae frequency as the input modulating carrier frequency and of a different phase. This signal is generated in the digital automatic frequency control part to decide the input color demodulated signal. And the phase error from the burst signal is calculated. The calculated phase error is utilized to rmove the phase error contained inthe demodulated color signal. In this paper, digital signal processing of automatic color control is proposed for VCR system campatible with both NTSC and PAL TV systems.

• Journal of information and communication convergence engineering
• /
• v.3 no.3
• /
• pp.115-118
• /
• 2005

In this study, the proposed algorithm is a correlativity signal in a mobile wireless channel that has estimated the direction of arrival. The proposed algorithm applied the space average method in a MUSIC algorithm. The diagonal matrix of the space average method was changed to inverse the matrix and to obtain a new signal correlation matrix. The existing algorithm was analyzed and compared by applying a proposed signal correlation matrix to estimate the direction of arrival in a MUSIC algorithm. The experiment resulted in a proposed algorithm with a min-norm method resolution at more than $5^{\circ}$. It improved more than $2^{\circ}$ in a MUSIC algorithm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.337-340
• /
• 2009

In general, channel information of received DTV signal analyzed based on symbol timing clock with only In-phase information in DTV receiver. This paper presents technical requirements of channel analysis system for DTV reception signal. In order to meet such requirements and measure more accurate magnitude and phase of channel information, compensation method for the quadrature information from measured in-phase data is proposed. The proposed channel analysis system is implemented with a commercial DTV chipset and provides fast data analysis with good connectivity with field test vehicles. Computer simulation and laboratory test results are provided to figure out the performance of the proposed channel analysis system for DTV signal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.57-58
• /
• 2014

Digital filter is very important role in signal processing system. In general, input signal is determined by transfer function of the digital filter. But if input signal was exposured in various sound environment, it is difficult to verify its original source. In this paper, inverse problem in order to extract original input signal from noisy environment is considered.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1934-1937
• /
• 2022

The meaning of crosswalks and traffic lights in modern society has changed a lot as the enforcement of traffic signal violations has been strengthened. In this paper, we present a new next-generation traffic light method using radar and Can-bus communication methods suitable for the new traffic signal enforcement system. This method is a system that prevents accidents by transmitting information on the entry of a person and a car to a traffic light in a place where a person and a car passing through a mutually invisible traffic light cannot be seen. Since this system has only been developed for a month, it may be somewhat lacking in experimentation. However, in just one month, there have been no incidents except for a few people where the system has been installed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.859-867
• /
• 2016

The Global Positioning System is a navigation system that has been developed by the United States for military use. Currently, many countries, including the Republic of Korea, use GPS for civilian and military uses. However, as useful as it is, GPS is vulnerable to its Jamming signal, as the strength of the signal from satellites is very weak. In this paper, a novel jamming signal detection and cancellation method is proposed when a narrow-band jamming signal is included in the GPS received signal. At the GPS receiver, the received signal is transformed to a frequency domain sample by Fast Fourier Transform. In order to suppress the Spectral Leakage, the Blackman-Harris window is used. The proposed jamming signal cancellation algorithm will find the frequency sample with maximum power and null the maximum sample in addition to some lateral samples. If the GPS receiver is designed with FFT of size 128 to 512, it is shown that 42 samples are optimal to cancel the narrow-band jamming signal.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.253-258
• /
• 2004

To get accurate information about the defect from the test signal, NDT engineers should have a good knowledge on forward problems. Such knowledge is usually obtained by a lot of testing experiences. Another why of obtaining such knowledge is to build a database containing lots of defect information and their corresponding signals. However, the archiving of raw test data would require a lot of storage space. In this paper, an economic way of storing signals is studied by using Fourier descriptors. Instead of saving raw signal data, Fourier descriptors are saved and the storage spare is reduced. Of course, the defect signal can be reconstructed from the stored descriptors. By using differential ECT signals produced by numerical modeling and experiment, the savings of 85% from the original signal and $57{\sim}65%$ from the filtered signal in the storage space were confirmed. The similarity of the reconstructed signal and the original signal was also demonstrated. This Fourier descriptor approach could contribute significantly in building differential signal databases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.865-871
• /
• 2016

This work presents a radar signal interferer to be used for evaluating the mutual interference among automotive radars. The developed interfering signal generator is composed of a reference signal generator and a 77 GHz transmitter. Reference signal generator is made up of commercial chips and board, it can generate various modulated signal such as triangular wave, sawtooth wave and random frequency hopping. The transmitter generates 77 GHz band signal by multiplying modulated reference signal frequency 28 times. Transmitter was fabricated using 65 nm CMOS process, it can operate horn antenna by built in on-chip waveguide feeder. The transmitter exhibited 7.31~8.06 dBm output power over a frequency lock range of 75.6~77 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1784-1789
• /
• 2013

In this paper, parallel orthogonal matching pursuit (POMP) is proposed to supplement the orthogonal matching pursuit (OMP) which has been widely used as a greedy algorithm for sparse signal recovery. The process of POMP is simple but effective: (1) multiple indexes maximally correlated with the observation vector are chosen at the firest iteration, (2) the conventional OMP process is carried out in parallel for each selected index, (3) the index set which yields the minimum residual is selected for reconstructing the original sparse signal. Empirical simulations show that POMP outperforms than the existing sparse signal recovery algorithms in terms of exact recovery ratio (ERR) for sparse pattern and mean-squared error (MSE) between the estimated signal and the original signal.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.461-467
• /
• 2022

Sonobuoy is a disposable device that collects underwater acoustic information and is designed to transmit signals collected in a particular area to nearby aircraft or ships and sink to the seabed upon completion of its mission. In a conventional sonobouy signal transmission and reception system, collected signals are modulated and transmitted using techniques such as frequency division modulation or Gaussian frequency shift keying, and received and demodulated by an aircraft or a ship. However, this method has the disadvantage of the large amount of information to be transmitted and low security due to relatively simple modulation and demodulation methods. Therefore, in this paper, we propose a method that uses an autoencoder to encode a transmission signal into a low-dimensional latent vector to transmit the latent vector to an aircraft or ship and decode the received latent vector to improve signal security and to reduce the amount of transmission information by approximately a factor of a hundred compared to the conventional method. As a result of confirming the sample spectrogram reconstructed by the proposed method through simulation, it was confirmed that the original signal could be restored from a low-dimensional latent vector.