• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.395-399
• /
• 2018

This article investigates the mechanism of electronic signal phase noise degradation induced by laser phase noise in optical links comprising optical resonators. Through theoretical derivation, we find that the phase noise of the output electronic signal has the same spectral shape of optical intensity noise as the output of the optical resonator. We propose that the optical resonator transfers laser phase noise to light intensity fluctuation and then the intensity fluctuation is converted to electric phase noise through AM-PM conversion mechanism in the photodiode. An optical link comprising a Fabry-Perot resonator was constructed to verify the proposed mechanism. The experimental results agree with our theoretical prediction verifying that the supposition is correct.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.689-694
• /
• 2011

Objective: The aim of this study is to evaluate the fluctuation of signal amplitude during repetitive dynamic contraction based on surface electromyography(EMG). Background: The most previous studies were considered isometric muscle contraction and they were difference to smoothing window length by moving average filter. In practical, the human movement is dynamic state. Dynamic EMG signal which indicated as the nonstationary pattern should be analyzed differently compared with the static EMG signal. Method: Ten male subjects participated in this experiment, and EMG signal was recorded by biceps brachii, anterior/posterior deltoid, and upper/lower trapezius muscles. The subject was performed to repetitive right horizontal lifting task during ten cycles. This study was considered three independent variables(muscle, amplitude processing technique, and smoothing window length) as the within-subject experimental design. This study was estimated muscular activation by means of the linear envelope technique(LE). The dependent variable was set coefficient of variation(CV) of LE for each cycle. Results: The ANOVA results showed that the main and interaction effects between the amplitude processing technique and smoothing window length were significant difference. The CV value of peak LE was higher than mean LE. According to increase the smoothing window length, this study shows that the CV trend of peak LE was decreased. However, the CV of mean LE was analyzed constant fluctuation trend regardless of the smoothing window length. Conclusion: Based on these results, we expected that using the mean LE and 300ms window length increased reproducibility and signal noise ratio during repetitive dynamic muscle contraction. Application: These results can be used to provide fundamental information for repetitive dynamic EMG signal processing.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.223-229
• /
• 2002

Spark plug ionization signal could be useful in an internal combustion engine as a feedback signal for combustion diagnostics such as misfire detection, knocking detection and lambda control, but the signal has high level of cyclic fluctuation in an internal combustion engine due to residual gas, pressure, temperature, mixture composition in the spark gap. Because of this reason it is very difficult to apply ion signal to commercial engine control. In this Study, a correlation between A/F and spark plug ionization signal was studied in a constant volume chamber. Constant volume chamber with gas phase fuel(Propane) has homogeneous fuel composition , no mixture flow, same pressure and temperature on each test. The results show that mean chemi-ion signal has the highest correlation with A/F and intial pressure change has on effect on the thermal-ion signal and not on chemi-ion signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.188-194
• /
• 2011

We analyze transmission performance of radio frequency signal in WDM-ROF (wavelength division multiplexing - radio over fiber) system employing photonic crystal fiber. In a WDM-ROF system employing conventional single-mode fiber, transmission performance of radio frequency signal is analyzed depending on each WDM channel. In this case, each WDM channel experiences power fluctuation of received RF signal in remote node because of double sidebands of the modulated signal and wavelength dependent dispersion of single mode fiber. This RF power fluctuation acts as a design constraint in viewpoint of system design. By employing photonic crystal fiber (PCF) with dispersion compensation characteristics, the transmission performance of RF signal can be improved compared with the case with SMF only.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2205-2210
• /
• 2009

In this paper, the proposed method is a denoising technology by tangent curve interpolation of zero points. The problem of the hard threshold method is improved by the proposed method. The quantity of time fluctuation of the electromagnetic signal as the quantity of electric fluctuation of the natural world or the curve of motion waveform of the fast movement of human extracted using virtual reality is, in fact, complex. Therefore it is important to decide exactly the signal properties as the inflection point for observation signal. In particular, it is necessary to extract the properties after denoising, since the measurement signal of the natural world include some noises. It shows that the noise of the inflection point signal with noise II, noise factor 5, is eliminated by the proposed method, and the result of SNR for the signal is improved 3.4dB than that by the conventional hard threshold.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.107-111
• /
• 1996

In this paper, the voltage monitoring system is designed to monitor the outage and voltage fluctuation by using a dial-up telephone. The master station receives tire outage signal-such as interruption and voltage sag etc. - from the remote in on-line of real-time. The SCC(Serial Communication Controller) is adapted to monitor voltages multiple clients(about 256 clients) simultaneously. The voltage fluctuation in a normal range shall be transmitted to the master station, at early morning the clients use the telephone less frequently. The operating system shall be "window 95" and the database is programmed in Visual-basic for a easy analysis of voltage fluctuation.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.05a
• /
• pp.1-4
• /
• 2003

본 연구는 경편성물의 특성에 영향을 미치는 중요한 구조변수인 조직, 편환의 계폐여부, 가이드바의 상호 움직임 방향에 따른 소리특성과 생리적 반응 사이의 관계를 파악함으로써 총합적 감성소재 설계를 위한 기초 자료를 제공하고자 하였다. 직물소리발생장치를 이용하여 7가지의 경편성물에 대한 마찰음을 녹음한 후, 이를 마찰음이 유발하는 생리반응을 측정하여 slow alpha파, fast beta파, ECG R-R, RESP, HF/LF, SCL, PV등을 분석하였다. 조직에 따라서는 LPT, Loundness(Z), Roughness(Z)와 Fluctuation strength(Z) 가장 큰 Sharkskin에서 fast beta파, ECG R-R, RESP는 증가하였으며 slow alpha파, PV, HF/LF는 감소하였다. 편환의 개폐여부에서는 폐환보다는 개환에서 Loudness(Z), Sharpness(Z), Fluctuation strength(Z)가 증가하였으며 RESP는 증가하고 HF/LF는 감소하여 개환이 더 불쾌한 감성을 유발하였다. 가이드바의 상호 움직임 방향은 counter보다는 parallel에서 slow alpha의 변화량이 감소하고 fast beta의 변화량이 증가하여 counter보다는 parallel이 더 불쾌한 감성을 유발하는 것으로 보인다. 또한 편성물의 음향특성 중 ΔL, Δf 와 Roughness(Z), Fluctuation Strength(Z)가 생리반응을 예측하는 중요한 요인으로써 나타났다.

• Journal of applied mathematics & informatics
• /
• v.15 no.1_2
• /
• pp.363-375
• /
• 2004

In this paper, We show that the bandpass random signals of the form ∑$_{\alpha}$$\alpha$$_{\alpha}$ a Sin(2$\pi$f$_{\alpha}$t + b$_{\alpha}$) where a$_{\alpha}$ being a random number in [0,1], f$_{\alpha}$ a random integer in a given frequency band, and b$_{\alpha}$ a random number in [0, 2$\pi$], generate Gaussian white noise signals and hence they are adequate for simulating Continuous Markov processes. We apply the result to the fluctuation-dissipation formula for the Johnson noise and show that the probability distribution for the long term average of the power of the Johnson noise is a X$^2$ distribution and that the relative error of the long term average is (equation omitted) where N is the number of blocks used in the average.error of the long term average is (equation omitted) where N is the number of blocks used in the average.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1015-1016
• /
• 2006

The important parameters deciding the fluctuation of Accumulation style surgical operation of ventriculus laser beam are smoothing capacitor, frequency and he characteristics of laser resonator. In this thesis, we control the fluctuation of medical $CO_2C$ laser in realtime by changing Duty-Ratio of IGBT and switching frequency with fixed the smoothing capacitor to improve the fluctuation of laser beam. We detect the light on laser resonator using a CdS photo sensor to improve ripple factor of laser beam and feedback fluctuated signals refined by a band pass filter into the control circuit to stabilize fluctuation actively. There is much to be desired in the realtime controlling technique of the light on Accumulation style surgical operation of ventriculus laser discharge tube in electrical signal. We propose switching control technique with microprocessor and photo sensing technique by controlling switch devices optimum operation and feedback signals detected by a photo sensor into the laser power supply in order to improve ripple factor of the $CO_2$ laser beam.

• KSTLE International Journal
• /
• v.2 no.1
• /
• pp.22-28
• /
• 2001

A resin bonded copper-graphite brush was investigated to evaluate the characteristics electrical signal transmission through a sliding contact as a function of the relative amount of graphite and copper in the brush. Particular attention was given to the correlation between electrical signal fluctuation and tribological properties in an electrical sliding contact system. A ring-on-block type tribotester was used for this experiment and the ring was made from pure copper. Results showed that a copper-graphite brush at a particular composition range exhibited the most stable frictional behavior with a minimum voltage drop. The amount of voltage drop at the friction interface was affected by the surface roughness, transfer film formation at the friction interface, and the real area of contact. Microscopic observations and the surface analysis showed a good agreement with the results from this experiment. The results also indicated that the electrical signal flunctuation was directly associated with the oscillation of the coefficient of friction during sliding by nanoscale variation of contacts at the friction interface.