• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2373-2380
• /
• 1993

This paper addresses the design procedure and testing result of a servo driven pan/tilt device which is capable of tracking arbitrary movement of a specified target object. In order to achieve real-time acquisition of feedback signal, a 2 degree-of freedom non-contact type displacement follower has been employed in stead of vision camera. The performance of the designed system is tested for different target velocities and control gains. The test result shows the satisfactory performance to be adopted as an effective tool for visual transfer in the context of teleoperation.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.763-769
• /
• 2007

A narrow loop noise bandwidth method is desirable to reduce the error of raw measurements due to the thermal noise. However, it degrades the performance of GPS initial synchronization such as mean acquisition time. And it restricts the loop noise bandwidth to a fixed value determined by the lower bound of the allowable range of carrier-to-noise power ratio, so that it is difficult to optimally track GPS signal. In order to make up for the weak points of the fixed-type narrow loop noise bandwidth method and simultaneously minimize the error of code and carrier measurements, this paper proposes a stepwise-type adaptive bandwidth algorithm for DGPS reference receivers. In this paper, it is shown that the proposed adaptive bandwidth algorithm can provide more accurate measurements than those of the fixed-type narrow loop noise bandwidth method, in view of analyzing the simulation results between two signal tracking algorithms. This paper also carries out sensitivity analysis of the proposed adaptive bandwidth algorithm due to the estimation uncertainty of carrier-to-noise power ratio. Finally the analysis results are verified by the experiment using GPS simulator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.351-354
• /
• 2002

The F!T tube is a new type of CRT without a shadow mask. Correct color reproduction is performed by an electronic system that measures the landing positions of the electron beams and corrects through a dedicated deflection system. This paper describes in detail the position sensor and some of the electronics needed to build a functional control system. The principle has been shown in single- and triple-beam 17" and 32" tubes, of which results are included.

• Journal of Positioning, Navigation, and Timing
• /
• v.1 no.1
• /
• pp.29-34
• /
• 2012

A software GNSS signal generator for the GPS L1/L2/L5 and Galileo E1/E5 signals is proposed in this paper. And this signal generator is designed and implemented with several components by considering the reuse and expansion of components for similar GNSS signals. The characteristics of the reusability of the components are confirmed with the carrier generation and the band-pass filter components. And the functionality of the GNSS multi-band IF signal generator is validated by using the commercial software GPS L1 receiver, and the performance of signal acquisition, tracking and accuracy of horizontal position error are analyzed for this validation. As a result, the GPS L1 signal generator operates successfully and it could be expected that other signal generators also operate well because most of components are the same as those of the GPS L1 signal generator.

• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.627-634
• /
• 2012

This paper considers the performance of the non-participating GPS software receivers under the presence of GPS pseudolite(PL). For the continuous PL signal and pulsed PL signal, the impact of PL signals on the GPS software receivers is investigated according to the signal strength of the PL and the distance between the PL and the GPS receiver.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.359-364
• /
• 2006

Interference can seriously degrade the performance of GPS receiver because GPS signal has extremely low power at earth surface. This paper presents a Narrowband Interference Excision Filter (NIEF) in frequency domain that removes narrowband interferences with small signal loss. A NIEF transforms the received GPS signals with interferences into the frequency domain with FFT and then compute statistics such as mean and standard deviation to determine an excision threshold. All spectrums exceeding the threshold are removed and the remaining spectrums are restored by IFFT. A NIEF effectively can remove various and strong interferences with a simple structure. However, the signal power loss is unavoidable during FFT and IFFT. Besides the hamming window and overlap technique, a threshold-whitening technique and an adaptive detection threshold are adopted to effectively reduce the signal power loss. The performance of implemented NIEF is evaluated using real signals obtained by 12 bit GPS signal acquisition board. The output of NIEF is fed into the Software Defined Receiver to evaluate the acquisition and tracking performance. Experimental results shows that many types of interference such as single-tone CWI, AM, FM, swept CWI and multi-tones CWI are effectively mitigated with small signal power loss.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2017

In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PC-based software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.1050-1055
• /
• 2006

Since the muiltipath signal arrives at the GPS receiver later than the line-of-sight signal, the multipath signal makes the shape of the correlation function asymmetric. This paper proposes a multipath mitigation method through asymmetry estimation of the correlation function, in which multiple correlators are utilized. The asymmetry is estimated from correlation values of correlators which have different chip spacings. Based on the estimated asymmetry, the correlation function is modified in order to get a better code tracking performance. Even through the proposed method uses multiple correlators including the narrow correlator, the acquisition performance is not degraded since the number of search cell of the narrow correlator part can be reduced in the algorithm of the proposed method. The simulation results show that the proposed method gives better performance than the generic correlator in multipath environment.

• Journal of Astronomy and Space Sciences
• /
• v.40 no.4
• /
• pp.237-245
• /
• 2023

Laser communication has been considered as a novel method for earth observation satellites with generation of high data volume. It offers faster data transmission speeds compared to conventional radio frequency (RF) communication due to the short wavelength and narrow beam divergence. However, laser beams are refracted due to atmospheric turbulence between the ground and the satellite. Refracted laser beams, upon reaching the receiver, result in angle-of-arrival (AoA) fluctuation, inducing image dancing and wavefront distortion. These phenomena hinder signal acquisition and lead to signal loss in the course of laser communication. So, precise alignment between the transmitter and receiver is essential to guarantee effective and reliable laser communication, which is achieved by pointing, acquisition, and tracking (PAT) system. In this study, we simulate the effectiveness of tip/tilt compensation for more efficient laser communication in the satellite-ground downlink. By compensating for low-order terms using tip/tilt mirror, we verify the alleviation of AoA fluctuations under both weak and strong atmospheric turbulence conditions. And the performance of tip/tilt correction is analyzed in terms of the AoA fluctuation and collected power on the detector.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.371-376
• /
• 2010

In this paper, we propose a new fast carrier recovery algorithm for high-order QAM systems. The proposed algorithm detects carrier frequency offset from the phase differences among the received symbols directly and combines it with the conventional carrier recovery, so that it is possible to achieve the carrier recovery with wide tracking range and fast acquisition time. Simulation results show that the proposed carrier recovery method reduces acquisition time at large frequency offset and low signal-to-noise ratio (SNR).