• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.558-564
• /
• 2006

When vehicles pass the connection between the bridge and earthwork, the difference of both sections' stiffness produces an increasing wheelload. As a consequence, it results in the excessive vibration of vehicles and the damage of bearing system. In general, steel plate girder railway bridges without ballast track have larger stiffness than the bridge with ballast, and produces larger impulse on the bridge superstructure. Thus, it is necessary to reduce the differences of both stiffness. This study presents parametric studies on the behavior of plate girder bridges and their tracks by means of various stiffnesses and the length of approach zone. The results of numerical study showed that the smaller the stiffness of both sides and the longer the length of approach zone, the variation of wheelload becomes smaller. Hence, it gives less burden into the plate girder bridges and their tracks. It is expected that the results of parametric study can be used as a preliminary data for the determination of economical length on the approach zone and the stiffness of both sides.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1231-1235
• /
• 2016

In this study, it measures electromyogram to estimate scoliosis by using sensors in both sides of spinal erector muscle. A device is measured raw data to input mcu through a filter and amplifier. MCU is named "arduino" that is calculated muscle activity with algorithm by inputting data. By comparing with both sides of spinal erector muscle's activity, it studies about estimation of scoliosis

• 대한의료기공학회지
• /
• 제16권1호
• /
• pp.78-100
• /
• 2016

Objects : The purpose of this study is to value measuring of sagital, horizontal, frontal aspects of DITI as scale of low back pain. Methods : We investigated 16 patients with low back pain who had visited in the H Korean medicine hospital in Gimpo city, Gyeonggi Province from January 1st to, August 31th, 2016. We evaluated the change of them by using Digital Infrared Thermographic Imaging. Results : There is meaningful differences in values for CV12 in pretest and posttest which were observed by DITI. In the Correlation analysis of values of meridian points in pretest and posttest, there is relation ΔSagital04(ST25/BL52), ΔSagital04(CV4/GV3) with low back pain. Conclusions : These results suggest that ΔSagital04(ST25/BL52), ΔSagital04(CV4/GV3) can be used as value of Low back pain.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.11-16
• /
• 2006

Reverse flow occurs in a channel when there is an obstruction at the entry, However it has been shown recently that reverse flow can be realized without an obstruction, by staggering the sides of the channel and placing it at an angle of attack to the oncoming flow. In this study the latter flow is computationally investigated. And the mechanism is investigated using PIV (Particle Image Velocimetry) method. The results have captured all the essential features of this complex phenomenon and show the time dependent pumping mechanism which leads to the occurrence of reverse flow.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.919-924
• /
• 2005

Fretting-wear caused by turbulence excitation for KSNP(Korea standard nuclear power plant) steam generator is investigated numerically. Secondary sides density and normal velocity are obtained by the thermal-hydraulic data of the steam generator. Because nonlinear finite element analysis is complex and time consuming, work rate is estimated by using linear analysis for simple straight 2-span tube. Wear volume and depth by using work rate calculation are estimated. Span length, secondary side fluid density and normal velocity are adopted to study the effects on the fretting-wear by turbulence excitation. When secondary sides density and normal velocity is increased, It turns out that secondary side density and normal gap velocity are very important paramater for fretting-wear phenomena of the steam generator.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.24-28
• /
• 2011

The purposes of this study are predictions of the changes in the section geometry and determination of the initial cross section so that opposite side in height direction is exactly parallel after coiling process. Finite element analysis is carried out for the calculation of the sectional changes for mold spring item. Analysis results reveal that the slope of the top and bottom sides varies in the range of 5 to 8 degrees and the amount depends on the dimension of the outer diameter. The slopes of the sides should be defined first among design variables.

• Steel and Composite Structures
• /
• 제11권3호
• /
• pp.183-205
• /
• 2011

This paper presents the results of an investigation into the post-buckling behaviour and ultimate strength of imperfect corroded steel plates used in ship and other marine-related structures. A series of elastic-plastic large deflection finite element analyses is performed on randomly corroded steel plates. The effects of general corrosion on both sides of the plates are introduced into the finite element models using a random thickness surface model. The effects on plate compressive strength as a result of parametric variation of the corroded surface geometry are evaluated. A proposal on the effective thickness is concluded in order to estimate the ultimate strength and explore the post-buckling behaviour of randomly corroded steel plates under uniaxial compression.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.171-178
• /
• 1998

This paper proposes a new overmodulation strategy to give a better voltage utilization by tracking voltage vector along hexagon sides. This strategy enables the inverter to control both magnitude and angle of current. Therefore, the vector control using this strategy can lead to better output torque dynamics compared to the conventional slip frequency control with six-step voltage, which is widely used in the traction drive. In this strategy, the d-axis output voltage of a current controller to control the flux is conserved and the q-axis output voltage to control the torque is controlled to place the voltage vector on the hexagon boundary In case of overmodulation. The limited q-axis voltage is used for anti-windup of q-axis current controller. This paper also presents a new field weakening scheme which incorporate the proposed overmodulation strategy. In this scheme, the flux level is selected by both required current limit and the available maximum voltage along hexagon sides. The validity of the proposed overall scheme is confirmed by the computer simulations for a typical traction drive with a 210[㎾] induction motor.

• 영어영문학
• /
• 제64권3호
• /
• pp.361-381
• /
• 2018

Shakespeare reflects/refracts the controversial spirit of his age in the epistemological and political skepticism of his Roman plays: Titus Andronicus, Julius Caesar, Coriolanus, and Antony and Cleopatra. Skepticism doubts all received truth and suspends judgment, and it often takes the form of mental jousting on both sides of a question. Renaissance skepticism was strengthened by rhetorical education. Arguing on both sides of the question (in utramquem partem) was a practice taught in Shakespeare's grammar school in order to enhance students' mental abilities in logic and dialectic. This rhetorical exercise seldom leads to a third-term resolution: it just reveals all the apparent and hidden aspects of a problem at issue. Shakespeare's Roman plays, especially his Julius Caesar, demonstrate this skeptical attitude, leaving the judgment to the audience.

• Animal Systematics, Evolution and Diversity
• /
• 제38권1호
• /
• pp.26-33
• /
• 2022

Two Pseudopolydora polychaetes, P. bassarginensis and P. reticulata, originally described from Peter the Great Bay in Russia and Taiwan, respectively, were recorded firstly in Korea with DNA information. Two species are known to have distinct morphological characteristics that are separated from other Pseudopolydora species. They are characterized by reticulate pigmentations on the dorsal sides of the anterior chaetigers, a longitudinal black band-like pigmentation on the caruncle, and black paired spots on the ventral sides of the anterior chaetigers. These two species can be distinguished morphologically from each other by the length of the caruncle. Methyl green staining pattern of the species is a good method for delimiting Pseudopolydora species. The partial sequences of the mitochondrial cytochrome c oxidase subunit I (COI), 16S ribosomal DNA (16S rDNA), and the nuclear 18S ribosomal DNA (18S rDNA) from Korean specimens of the two species were determined. The morphological descriptions and images of the two Pseudopolydora species are provided.