• 자동차안전학회지
• /
• 제13권3호
• /
• pp.60-68
• /
• 2021

Invisible passenger airbag door system of hard panel types must be designed with a weakened area such that the side airbag will deploy through the instrument panel as like intended manner, with no flying debris at any required operating temperature. At the same time, there must be no cracking or sharp edges in the head impact test. If the advanced airbag with the big difference between high and low deployment pressure ranges are applied to hard panel types of invisible passenger airbag (IPAB) door system, it becomes more difficult to optimize the tearseam strength for satisfying deployment and head impact performance simultaneously. It was introduced the 'Operating Window' idea from quality engineering to design the hard panel types of IPAB door system applied to the advanced airbag for optimal deployment and head impact performance. Zigzab airbag folding and 'n' type PAB mounting bracket were selected.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.170-177
• /
• 1997

In this study, an analysis technique using simple beam model for predicting structure crashworthiness of the passenger car side impacted with an angle by another passenger car was investigated. The simple model was composed of major beam-like side structure which carry almost all side impact load. A procedure of component collapse test, calculation of load carrying capability and dynamic simulation was carryed out sequentially. Transient dynamic algorithms and a computer program to simulate deformations and motions of the impacted car was developed. The developed procedure was applied to a 3 door passenger car side impacted with an angle of 75 degree and the analysis results show good agreements with the actual test results.

• 오토저널
• /
• 제16권2호
• /
• pp.45-54
• /
• 1994

미국 등 선진국에서는 복합재료 자동차 차체 및 부품에 관한 연구를 활발히 수행하고 있다. 그러나, 국내 자동차 업계의 역사가 짧고, 보수성으로 인하여 복합재료 차체와 부품에 대한 연구와 응용이 부족한 형편이다. 따라서 본 고에서는 복합재료의 성질을 고찰한후에, 드라이브 샤프트와 Door Side Impact Beam을 복합재료로 설계하는 예를 설명하고자 한다.

• 한국화재소방학회논문지
• /
• 제33권1호
• /
• pp.30-38
• /
• 2019

메탄 연료성분이 가득 찬 축소 구획실을 대상으로 개구부에서 유입된 공기와 내부 연료의 혼합특성과 백드래프트 발생특성을 규명하기 위해 대와동모사를 수행하였다. 통상의 문 형태(Door)와 가로 형태의 문이 벽면 상단($Slot_U$), 중단($Slot_M$) 및 하단($Slot_L$)에 있는 구획실의 4가지 개구부 조건들에 대해서 검토를 수행하였다. 점화원이 없을 경우 구획실 내부로 유입되는 산소의 양과 외부로 유출되는 연료의 양은 Door > $Slot_U$ ~ $Slot_M$ > $Slot_L$의 순서로 크지만 $Slot_U$의 경우가 구획실 내부에서 연료와 산소가 전체적으로 가장 잘 혼합되었고 $Slot_L$의 경우에는 연료와 산소가 층을 이루어 혼합이 가장 잘 이루어지지 않는 것으로 나타났다. 구획실 내 산소량과 연료량으로 정의되는 총괄당량비는 구획실에서 발생하는 백드래프트의 강도와 잘 연관되지 않음을 확인하였다. 백드래프트 발생 시의 구획실 내부의 최고 압력은 혼합이 가장 잘 이루어진 $Slot_U$가 가장 높게 나타났으며 $Slot_L$의 경우에는 압력상승이 낮아 백드래프트가 발생하지 않았다. 백드래프트 발생 시 Door와 $Slot_M$ 조건에서의 최고 압력값은 $Slot_U$ 다음 순서로 나타났으며, 각 조건들의 최고압력은 백드래프트 발생순간까지의 총 열발생량과 잘 연관되어 설명될 수 있었다.

• Journal of Korean Neurosurgical Society
• /
• 제42권3호
• /
• pp.168-172
• /
• 2007

Objective : Hirabayashi's open-door laminoplasty is a good procedure to use to treat patients with myelopathy of the cervical spine; however, the authors have experienced problems in maintaining an open-window in cervical spines after the surgery. The authors developed a modified method of the expanded open-door laminoplasty and compared the radiological and clinical results with those of the classical method. Methods : In the modified method, wiring fixation with lateral mass screws on the contra lateral-side instead of fixing the paraspinal muscle or facet joint, as in the classical methods, was used in the open window of the cervical spine. Fifteen patients with cervical myelopathy were treated using the classical method and 12 patients were treated using the modified method. Preoperative and postoperative clinical conditions were assessed according to the Japanese Orthopedic Association (JOA) score. The radiological results were compared with the preoperative and postoperative computed tomography (CT) findings. Results : In both methods, the clinical results revealed a significant improvement in neurological function (p<0.001). Image analysis revealed that the cervical canals were continuously expanded in patients treated using the modified methods. However, authors have observed restenosis during the follow-up periods in 4 patients treated using the original method. Progression to deformity and spinal instability were not observed in any of the patients in the radiological results. Conclusion : Although analysis with a larger population and a longer follow-up period needs to be undertaken, our modified open-door laminoplasty has shown an advantage in better maintaining an open window in comparison with the Hirabayashi's open-door laminoplasty.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2546-2551
• /
• 2007

Weather Strip(W/S) is a rubber part to proof water, sound and dust for opening and shutting devices including vehicle doors. And it requires high dimension precision and durability to proof water, noise, vibration and etc. But ironically it itself makes some wind noise because of some protuberance with glasses. The air flow analysis of door part of vehicle makes it possible to calculate and find out the cause of wind noise. In previous analysis, we focus on the numerical air flow analysis of the automobile side part. We do 2D-C.F.D first and 3D second. Through simulations, we can calculate the amount of sound pressure level at the glass run and find out the effects of glass run to make wind noise. Finally we can improve shape of glass run to reduce wind noise although it is small amounts of sound pressure reduction compared with total vehicle noise level.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.89-98
• /
• 2000

Using conventional textile techniques such as weaving braiding knitting and stitching it is possible to produce a wide range two and three dimensional fiber preforms, however so far only a limited attention has been given to knitted fabrics in composite industry. This is mainly due to the opinion that knitted fabric reinforced composites posses low mechanical properties owing to their looped fiber architecture. But it is possible to obtain desired mechanical properties by selecting proper knitted fabric structure, In this paper mechanical characteristics of kevlar plain weft knitted fabrics reinforced plastics(KFRP) are evaluated for th development of intrusion beam of car side door. Tensile bending impact properties of KFRP are measured experimentally and crush demands of Americal Federal Motor Vehicle Safety Standard No.214(FMVSS 214) compared with the bending load and displacement of KFRP by quasi-static test method. The applicability and limitation of bending load and displacement of KFRP according to specimen size has been discussed.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.1-6
• /
• 2006

Subway platform is divided into Side-platform type and Center-platform type. In this study does quantitative fire risk assesment of subway platform types in numerical analysis by using CFD model. From the result of this study, 1) All exhaust mode was low-end result it seems most fire risk at Side-platform station. 2) All exhaust mode was low-end result it seems most fire risk at Center-Platform station. 3) When comparing same type exhaust mode of Side-platform and Center-platform that last thing was visible $9.1{\sim}72.34%$ low-end fire risk. Center-platform is more opera-tive than Side-platform that reduce fire risk when that was same dimension and external environment. Designer look upon a fire characteristic of subway platform types when he make smoke control air volume and platform area design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.464-468
• /
• 2008

In most of the passenger side airbag door in hard type IP today is designed with invisible tear-seam line. In order to design the tear-seam invisible, the tear-seam must be designed with required RWT (residual wall thickness) that is just thick enough to be broken by the PAB pressure on deployment and not by other surrounding impact forces. Hence, keeping the right optimum opening force is very important, and finding the right RWT became the key in designing the tear-seam. The study conducted in this paper describes the search for the optimum RWT around the tear-seam by using finite element method and the optimum RWT is suggested for milling type tear-seam having V-shape cross-section.

• 소성∙가공
• /
• 제13권2호
• /
• pp.115-121
• /
• 2004

Hemming is the last farming process in stamping and determines external quality of automotive outer panels. Few numerical approaches using 3-dimensional finite element model have been applied to a hemming process due to small element size which is needed to express the bending behavior of the sheet around small die comer and comparatively big model size of automotive opening parts, such as side door, back door and trunk lid etc In this study, part model assembling method is suggested and applied to the 3-dimensional finite element simulation of flanging and hemming process far an automotive front hood.