• 복식
• /
• 제63권8호
• /
• pp.76-89
• /
• 2013

This study is about 'asymmetry triangle-Mu' Jeoksam and Hansam in the early days of Joseon Dynasty. A study was done regarding the records of Jeoksam and Hansam in literature, the present state of the excavated 'asymmetry triangle-Mu' clothing Jeoksam and Hansam, and finally a deduction of the reason for the appearance of the 'asymmetry triangle-Mu' clothing Jeoksam and Hansam. The width of front length of 'asymmetry triangle-Mu' clothing in the early days of Joseon Dynasty is 29.5~35 cm and the width of one breath of the sleeve is 29.5~35 cm. The width of 'asymmetry triangle-Mu' is 9.5~16 cm and it is relatively big. Comparing to the width of one breath of the sleeve, it is almost 1:2.2~3.6 ratio. Therefore, when the sleeve was cut, the Mu was linked in order to save fabric the gusset of sleeve had to be folded and turned, and finally it became asymmetric. As a result of the above consideration, since the width of upper garments of $16{\sim}17^{th}$ century was big, the wearing of short tops of Jeoksam or Hansam without side vent as a small 'triangle-Mu' was uncomfortable. Because of this reason, the size had no option but to become bigger. So, during the $16^{th}$ and $17^{th}$ century, a period where mass production of fabric was difficult, the 'asymmetry triangle-Mu' type was considered to be a reasonable cutting method. After the middle of $17^{th}$ century, it can be estimated that 'asymmetry triangle-Mu' clothing disappeared according to the narrow aspect of clothing type.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.11.1-11.8
• /
• 2016

Background: Silk cocoon is composed of multiple layers. The natural silk cocoon containing all layers was cut as a rectangular shape as defined as total group. The inner and outermost layers were removed from the total group and the remained mat was defined as the middle group. The objectives of this study was to compare the total group with the middle group as a barrier membrane for the guided bone regeneration. Methods: The effects of these materials on the cellular proliferation and alkaline phosphatase (ALP) expression of MG63 cells were explored. For comparing bone regeneration ability, bilateral bone defects were created in calvarial areas in ten adult New Zealand white rabbits. The defects were covered with silk membranes of the middle group, with silk membrane of the total group used as the control on the contralateral side. The defects were allowed to heal for 4 and 8 weeks. Micro-computerized tomography (${\mu}CT$) and histological examination were performed. Results: The middle group exhibited a higher MTT value 48 and 72 h after treatment compared to the total group. ALP expression was also higher in the middle group. The results of ${\mu}CT$ and histologic examination showed that new bone formation was significantly higher in the middle group compared to the total group 8 weeks postoperatively (P < 0.05). Conclusions: In conclusion, the middle layer of the silk cocoon supports guided bone regeneration better than unprocessed silk cocoon.

• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.5-12
• /
• 2007

이암은 건조 조건에서는 일정한 강도와 강성을 가지나, 지하수 침투 등에 의한 습윤, 포화 시 고유의 강도 및 강성이 저하되어 급속히 풍화되는 특성을 가지며, 포항지역에서 자주 발생하는 절취사면의 활동은 주로 이암이 풍화되어 전단강도가 급격히 저하되는 것으로 볼 수 있다. 본 연구는 시추조사시 강성이 충분한 것으로 평가된 이암층에 PRD강관말뚝을 시공한 후 정재하 시험을 실시한 결과 소요지지력이 부족하여, 이를 보강하기 위한 가장 우수한 방법을 찾기 위하여 여러 가지 공법을 검토하였다. 말뚝지지력 증대에 가장 효과적인 방법을 찾기 위해 말뚝주변 및 선단부에 MSG공법, 마이크로파일 보강후 주변그라우팅공법, 선단보강 그라우팅 및 콘크리트 속채움 등의 방법으로 시험시공을 실시하였고, 시험말뚝에 대한 정재하시험 결과 MSG공법으로 보강한 말뚝의 지지력이 가장 우수함을 알 수 있었다.

• 한국의류산업학회지
• /
• 제12권6호
• /
• pp.789-795
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Archives of Plastic Surgery
• /
• 제37권3호
• /
• pp.313-316
• /
• 2010

Purpose: Tie-over dressing is widely used to secure skin grafting on face, body, or extremities. It can be a rather complicated task and is not easy to make compressive dressing again if performed in a conventional method. So, we hereby introduce an easy reproducible tie over dressing method. Methods: After completing the skin graft, Cut the silastic drainage longitudinally in half and spread to the grafted skin margin. Drainage is fixed by using the stapes or sutures. A fluffy gauze bolus dressing is placed over a furacin impregnated gauze and wrapped around. After suturing the distal margin of silastics with opposite side using the silk thread either 5 - 0 or 3 - 0, knot of suturing, which is pressed down against the dressing while the threads are tightened, is made into center of each sides. Results: It can make dressing again after observing the grafted skin, and it can also make pressure on the grafted area evenly until the grafted skin is taken. Conclusion: This dressing method makes the surgeons and patients comfortable. To surgeons, it provides more rapid and easier way to do dressing, and to patients, it eliminates pain caused by redressing.

• 대한물리의학회지
• /
• 제8권4호
• /
• pp.549-558
• /
• 2013

PURPOSE: This study is designed as a retrospective study, and identified the clinical usability of Sit to Stand (STS) test for predicting of fall incidence in stroke patients who experienced a fall within 1 year. METHODS: Between July 2011 and November 2012, 69 inpatients with stroke in K rehabilitation hospital were participated under voluntarily signing the informed consent form. STS test and 10m walk test (10MWT) were used to assess the muscle strength of lower-extremity and walking velocity, respectively. Also, we tested dynamic balance and motor function of lower-extremity in affected-side using with the Berg balance scale (BBS) and the Fugl-Meyer assessment of lower extremity (FM-L/E). METHODS: There were significant differences between subjects with fall-experienced group and without subjects without fall-experienced group in STS test, 10MWT, BBS scores and FM-L/E. STS test significantly showed a negative correlation between 10MWT (r=-.657), BBS (r=-.512), and FM-L/E (r=-.563). And, 10MWT have a influence on the performance of STS test (the capacity of explanation = 20%). The cut-off value of STS performance predicting falls experience is ${\geq}14.36$ seconds (sensitivity=76%; specificity=79%, area under curve=.785). According to logistic regression analysis of falls experience, subjects ${\geq}14.36$ s showed that 4.164 times (odd ratio) increased in falls than subjects < 14.36 s in STS test. CONCLUSION: This study demonstrated that STS test may be a useful tool predicting and measuring falls in patients with stroke. Further study will be needed to elucidate the kinematic analysis of STS test and the relationship between physical activity level and falls in stroke patients.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.140-148
• /
• 2004

A novel rapid prototyping (RP) process, a full-automated transfer type variable lamination manufacturing process (Full-automated VLM-ST) has been developed. In the full-automated VLM-ST process, a vacuum chuck and a rectilinear motion system transfer the EPS foam material in the form of the plate with two pilot holes to the rotary supporting stage. The supplied material is then cut into an automated unit shape layer (AUSL) with a desired width, a desired length, a desired slope on the side surface, and a pair of reference shapes, which is called the guide shape (GS)’, including two pilot holes in accordance with CAD data through cutting in two steps using a four-axis synchronized hotwire cutter. Then, each AUSL is stacked by setting each AUSL with two pilot holes in the building plate with two pilot pins, and subsequently, adhesive is applied onto the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously given to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly and automatically fabricated. This paper describes the method to generate guide shapes in AUSL data for the full-automated VLM-ST process. In order to examine the applicability of the method to generate guide shapes, three-dimensional shapes, such as a piston shape and a human head shape, are fabricated from the full-automated VLM-ST apparatus.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• The Korean Journal of Physiology and Pharmacology
• /
• 제7권2호
• /
• pp.97-101
• /
• 2003

The salivary glands produce 1.5L of fluid per day. As in other exocrine organs, the general mechanism in the salivary glands is that water movement occurs secondary to osmotic driving forces created by active salt transport. Therefore, high water permeability in the salivary glands is expected to have a variety of aquaporin (AQP), a water channel. Although some AQPs have been known to be present in the salivary glands, roles of parasympathetic nerve in AQP expression have not yet been examined. This study was designed to examine the changes of AQPs and extracellular signal-regulated kinase (ERK) in the submandibular glands after parasympathetic denervation. Right chorda-lingual nerve was cut, and each right (experiment) and left (control) submandibular gland was excised at 1, 3, 7, 14, 30 days after denervation. The denervated right submandibular glands were resulted in weight loss and morphologic changes, including cell loss and atrophy, as the time elapsed after parasympathetic denervation increased, whereas there were no histologic alteration in control side. AQP5 which is known to reside in apical membrane and secretory caraliculi of the submandibular acini were gradually underexpressed according, as the time after denervation increased. Expression of AQP4 in submandibular ductal epithelium was down-regulated after denervation. Besides, AQP3 and 8, which is known to be present in basolateral membrane of the glandular acini, were gradually underexpressed after denervation, similar to the pattern of other types. Expression of ERK, a mitogen-activated protein kinase, was downregulated after parasympathetic denervation in the submandibular gland. These results suggest that parasympathetic nervous system regulates the expression of AQPs in salivary glands, and is in part mediated by ERK pathway.

• 암석학회지
• /
• 제7권3호
• /
• pp.147-160
• /
• 1998

삼랑진 칼데라에서는 삼랑진응회암의 강하응회암과 회류응회암, 칼데라후 관입체의 유문암 질암과 각섬석 흑운모 화강암, 광역구조 관입체의 세립질 화강섬록암과 흑운모 화강암 등이 관련된다. 화산작용은 먼저 화도에서 어떤 외부물과 상호작용되는 수증기플리니언 분출상으로 주로 강하회를 퇴적시켰으며 점차 물의 유입이 차단됨으로써 일시적으로 플리니언 분출상으로 전환되어 강하부석을 퇴적시켰다. 이는 다시 회류분출상으로 전환되어 고온의 화성쇄설 물질이 회류로 일시에 쏟아져 정치됨으로써 심하게 용결되었다. 분출초기에는 중앙화구로부터 회류가 발생되었지만 후기에는 환상열극화 구로의 전이가 일어났다. 이 결과로 칼데라 내부에 최고 630m 이상 두께의 회류응회암을 축적하였다. 이 회류분출의 결과로 마그마챔버의 지붕이 함몰되어 삼랑진 칼데라를 형성하게 되었다. 칼데라후 화산작용으로서 중앙회구와 환상단열대를 따라 유대상 유문암이 주입되어 중앙관임체와 환상암맥을 형성하고 다시 환상암맥 내측부에 유문대사이트 반암과 대사이트 반암이 정치되었다. 이후 남서측 환상 단열대를 따라 각섬석 흑운모 화강암이 관입되어 환상관입체의 일원이 되었다. 그리고 칼데라의 북동쪽 어영단층대를 따라 세립질 화강섬록암과 흑운모 화강암이 관입되면서 환상암맥을 절단하였다.