• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.327-330
• /
• 2006

This paper represents the numerical analysis on effects of radius ratio in a concentric annulus with a rotating inner cylinder. The numerical model consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8mm, the numerical parameters are angular velocity and radius ratio. Also, the whole walls of numerical model have no-slip and the working fluid is used water at $20^{\circ}C$. The numerical analysis is assumed the transient state to observe the flow variations by time and the 3-D cylindrical coordinate system. The calculation grid adopted a non-constant grid for dense arrangement near the wall side of cylinder, the standard $k-{\omega}$ high Reynolds number model to consider the effect of turbulence flow and wall, the fully implicit method for time term and the quick scheme for momentum equation. The numerical method is compared with the experimental results by Wereley and Lueptow, and the results are very good agreement. As the results, TVF isn't appeared when Re is small because of the initial flow instability is disappear by effect of the centrifugal force and viscosity. The vortex size is from 0.8 to 1.1 for TVF at various $\eta$, and the traveling distance for wavy vortex have the critical traveling distance for each case.

• Journal of the Korean housing association
• /
• v.19 no.2
• /
• pp.105-114
• /
• 2008

This study is conducted to investigate the organization of Cheongunri in Cheong-song, as well as the characteristics of folk houses. In this study, 82 folk houses, including the villages, are surveyed; among them, 15 houses are intensively analyzed in terms of the structure of plane and the arrangement of space. The focus of study is on discovering an internal order system of villages and tracing a relationship between the characteristics of houses and the environmental factors. According to the results of the study, an Intrinsic order in Cheongunri is found to be related to the mountain axis, the road system, and the flow axis; and the form of folk houses is also found to be influenced by this order. The major characteristics of folk houses can be summarized as follows: (1) Most of the houses face east along the mountain axis, whereas houses influenced by the flow axis tend to face south. (2) The side of houses tend to be open to the outside, showing external directionality. This characteristic seems to be closely related to the direction of the main gate in a house site. (3) The layout of the main quarters and the annex quarters is found to be related to the direction of the main gate in a house site. Especially, the characteristics of courtyard are found to be affected by the annex quarters. From the above results, it can be concluded that villages have an intrinsic order depending on the geographic characteristics of a surrounding natural environment, and folk houses have also changed accordingly.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.21-30
• /
• 2012

Interior space of modern society has a request for non-functional considerations as well as a need for function. French sociologist Jean Baudrillard defined this phenomenon as a dialectical relationship between the functional system and the non-functional system in his book "The System of Objects". The main goal of interior design is the pursuit of non-functional aspects which can satisfy emotional needs of human being without ignoring functional side. This means that designer should exceed the limitation of the functional system and overcome it by his own idea and method. Under this recognition, this paper tried to understand how Shiro Kuramata and Takashi Sugimoto accomplished the overcoming successfully. Sugimoto breaks through mechanical monotony introducing the non-functional objects into the functional system. His objects have power and form of the nature. They also shows traces of manufacture and labor. They works as media transferring old life and values. Sugimoto sometimes adopts the non-functional system such as collection, so it reveals time of collecting and arrangement of various objects. In contrast to Sugimoto, Kuramata erased the form of functional object and turned over the everydayness of the functional system. Instead, aesthetical phenomena substitutes form. Having doubts about the geometrical order of functional system, he opened a discourse for its meaning and limitation. However they have something in common which works as a blueprint for establishing subject's discourse. This discourse is comprised of their own memories of scenes. These subjects' discourse institute worlds through their design works based on each methodology. From the Heideggerian point of view, the worlds offer a foundation which allows the establishment of art in interior design.

• Tunnel and Underground Space
• /
• v.28 no.2
• /
• pp.142-155
• /
• 2018

The ${\bigcirc}{\bigcirc}$ mine has irregularly developed stratum around the ore body. The purpose of this study is to array irregular stratum thickness systematically for effective roof bolting and to implement a supporting system corresponding to it. The number of 81 cases combined with stratum thicknesses was limited to 9 cases by robust design. For each case, the load height which can act as a roof load was determined by the characteristics of stratum and RMR. The load range due to the load height is calculated assuming block shaped and arch shape. The support load of the roof bolt was considered as the average load of the two methods. Numerical analysis results of the support design showed that the cable bolt was more effective for the roof supporting fully grouted than the anchoring type. As a result of the construction, it was possible to control the roof, but all of the roof was gradually sinking downward due to the deformation of the side wall of the mine tunnel.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.105-110
• /
• 2007

We have built the millimeter-wave passive imaging system with a lens and mechanical scan antenna. The lens was designed based on optical theory in order to focus millimeter-wane. A full image was taken from image points scanned by Placing antenna at the representative focal plane selectively. An integrated antenna array device for low-loss and low-noise with the array of 4 by 1, where components such as antenna, balun, MMIC, and detector were assembled on a sin91e substrate, and a fermi tapered slot antenna with high-gain and low-side lobe were used for elements of this millimeter-wave passive imaging system. Two dimensional antenna arrangement on focal plane was achieved in this imaging system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.577-582
• /
• 1995

Sixty ram lambs, weighting 23.5 kg, were randomly assigned in a $2{\times}3$ factorial arrangement of two dietary energy (high; 11.7 and low; 9.0 MJ ME/kg DM) and three levels of poultry offal meal supplementation (0, 5 and 10%). Lambs were fed ad libitum for 120-day before slaughter. At slaughter, half the lambs in each dietary treatment group were randomly selected for electrical stimulation of their undressed carcasses. The M. Biceps femoris pH and temperatures were monitored at 1, 3, 5, 8 and 24 h postmortem. At 24 h postmortem, the M. biceps femoris was removed from the fight side of each carcass and steaks were obtained for determination of Warner-Bratzler shear force, collagen content and collagen solubility. The results showed that temperature and pH values during the 24-h postmortem were consistently higher (p < .01) and lover (p < .01), respectively, for M. biceps femoris from lambs fed high energy diets than for those fed on low energy diets. Muscles from high energy fed lambs had lower (p < .01) shear force values and higher (p < .01) percent soluble collagen than for low energy fed lambs; total collagen content was not significantly influenced by dietary energy level. Increased the level of poultry offal meal supplementation in the diet to 10% was associated with concomitant increases (p < .01) in muscle tenderness and percent soluble collagen. Electrical stimulation (ES) of carcasses resulted in a lower shear force values for the M. biceps femoris than in non-stimulated carcasses (Non-ES); total collagen content and percent soluble collagen were not significantly affected by ES treatment.

• Journal of architectural history
• /
• v.26 no.3
• /
• pp.39-49
• /
• 2017

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.86-89
• /
• 2002

In this paper, the design of a IMVA single-phase high temperature superconducting(HTS) power transformer with BSCCO-2223 HTS tapes is presented. The rated voltages of each sides of the transformer are 22.9 ㎸ and 6.6 ㎸, respectively The winding of 1MVA HTS transformer is consisted of double pancake type HTS windings, which have advantages of insulation and distribution of high voltage, and are cooled by subcooled liquid nitrogen of 65K. Four HTS tapes were wound in parallel for the windings of low voltage side and the four parallel conductors are transposed. The design of 1MVA HTS transformer, a shell type core made of laminated silicon steel plate is chosen, and the core is separated with the windings by a cryostat with a room temperature bore. The cryostat made of non-magnetic and non-conducting material and a liquid nitrogen sub-cooling system is designed in order to maintain the coolant's temperature of 65K. For electromagnetic analysis of 1MVA HTS transformer, a finite element method of an axis of symmetry is used. The maximum perpendicular component of magnetic flux density of pancake windings is about 0.15T. And through analyzing the magnetic field distribution, an optimal winding arrangement of 1MVA HTS transformer is obtained.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.189-198
• /
• 2005

This study showed that numerical simulation can be effectively used to analyze discharge capacity according to the form and arrangement of the lock gate of a tidal power plant. For the numerical simulation, FLOW-3D with Reynolds-averaged Navier-Stokes equation as a governing equation was used. This study found that improvement of apron length and approach angle of guide wall of the lock gate causes differences in discharge capacity of $10\%$ or more. In addition, there was a difference of discharge capacity caused by the connecting structures of the drainage gate and hydraulic turbine structure and the side slope at the end of apron. This study also showed that hydraulic investigation to enhance a discharge capacity is needed when the lock gate is designed and that numerical model experiments can be a useful analysis tool to design the drainage structure, as well as the hydraulic model experiment.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.49-53
• /
• 2017

Metamaterials composed of split cut wire (SCW) on grounded polyimide film substrate have been investigated for the aim of electromagnetic wave absorbers operated in THz frequency band. Reflection loss and current density distributions are numerically simulated with variations of the SCW geometries using the commercial software. The minimum reflection loss lower than -20 dB has been identified at 5.5~6.5 THz. The simulated resonance frequency and reflection loss can be explained on the basis of the circuit theory of an inductance-capacitance (L-C) resonator. Dual-band absorption can be obtained by arrangement of two SCWs of different length on the top layer of the grounded substrate, which is due to multiple magnetic resonances by scaling of SCWs. With increasing the side spacing between SCWs, a more enhanced absorption peak is observed at the first resonance frequency that is shifted to a lower frequency.