• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.545-546
• /
• 2011

• 공학교육연구
• /
• 제21권3호
• /
• pp.12-19
• /
• 2018

In this study, a new experimental device was developed for measurement of the coefficient of kinetic friction using a photo gate timer system which have advantages of easy and accurate detection of motion. This device, consisting of a side air-guide track and a side friction-free glider, forces a friction sample to move in a straight line without producing unnecessary friction. The new device is compared to two conventional measuring methods of friction for four different friction samples: one is using a camera system and the other is using a force sensor. It is demonstrated that the developed friction device in this study is easier to operate and produces the most accurate and the least deviating results among them. On the basis of these results, we propose that friction experiment using the new friction device is included in general physics experiment, so that engineering students should have a chance to get correct understanding of classical mechanics including friction phenomenon.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.565-572
• /
• 1994

According to the classification of dental arch form and the analysis of patterns of chewing movement, the patterns of chewing movement in each group were evaluated and compared with those of the normal group. Results were summarized as follows ; 1. Opening phase in chewing movement In the group which the maxillary second molar positionsbuccal side, the chewing patterns which have the Vertical Guide Openings in frontal plane, the Posterior Guide Openings in hjorizontal plane were observed. In the group which the maxillary premolars position lingual side, the chewing paterns which have the Protrusive Shift Openings in horizontal plane and sagittal plane were observed. 2. Closing phase in chewing movement. In each group except for the normal group, the chewing patterns which have the Concave Closure in frontal plane and in Horizontal plane were observed. In the group which the maxillary premolars position buccal side, the chewing patterns which have the Lateral Guide Closure in frontal plane and in horizontal plane, the Vertical Guide Closre in sagittal plane were observed: From the results, as the characteristics of the dental arch form have appeared in chewing movement, the close relationships were found between dental arch form and chewing movement. It is suggested that the evaluation of dental arch form is effective in the diagnosis of function of stomatognathic system.

• 소성∙가공
• /
• 제11권4호
• /
• pp.332-340
• /
• 2002

The light guide plate of the TFT-LCD reflects the light originated from the light source, and guides the light to the front side of LCD so that we can see images vividly. This paper is concerned with tile injection molding of the light guide plate for the reflective typed LCD related to IMT-2000. The finite element analysis has been carried out based on the pine stress theory to predict both the thermal stresses of the products in the post-filling stage and the in-plane deformation behavior of the products after ejection process. Based on the simulation results, the mold for the light guide plate of a 2inch sized LCD has been designed.

• Wind and Structures
• /
• 제17권5호
• /
• pp.537-552
• /
• 2013

Wind tunnel experiments were performed to study the wind loads on an inclined flat plate with and without a guide plate. Highly turbulent flow, which corresponded to free-stream turbulence intensity on the flat roof of low-rise buildings, was produced by a turbulence generation grid at the inlet of the test section. The test model could represent a typical solar collector panel of a solar water heater. There are up-stream movements of the separation bubble and side-edge vortices, more intense fluctuating pressure and a higher bending moment in the turbulent flow. A guide plate would result in higher lift coefficient, particularly with an increased projected area ratio of a guide plate to an inclined flat plate. The value of lift coefficient is considerably lower with increased free-stream turbulent intensity.

• 한국방사선학회논문지
• /
• 제17권5호
• /
• pp.671-677
• /
• 2023

미세 섬광 픽셀을 사용하여 섬광체 블록을 구성할 경우 섬광체 블록 가장 자리에 위치한 섬광 픽셀들에서 중첩되어 영상화되는 결과가 나타난다. 이를 해결하기 위해서 섬광체 블록과 광센서 사이에 광가이드를 삽입하여 모든 섬광 픽셀들의 영상을 분리하여 획득하였다. 그러나 광가이드를 통해 빛의 손실이 발생할 수 있으며, 이는 에너지 분해능의 감소로 결국 영상의 질에 영향을 미치게 된다. 이에 본 연구에서는 광가이드의 옆면에 반사체를 사용하여 더욱 우수한 섬광 픽셀의 분리가 가능하며, 빛 손실을 최소화해 우수한 에너지 분해능을 확보할 수 있는 검출기를 설계하였다. 이전 연구와 비교 평가를 위해 빛 시뮬레이션이 가능한 DETECT2000을 통해 평면 영상을 획득하여, 분리 정도 및 빛 수집율을 평가하였다. 광가이드의 옆면에 반사체를 사용할 경우, 광가이드의 물질에 상관없이 모든 물질에서 매우 우수한 분리 정도를 나타내었으며, 이는 이전 연구에 비해 더욱 우수한 분리 결과를 나타내었다. 또한 빛 수집율은 반사체 적용하였을 경우, 그렇지 않은 경우에 비해 5배 이상 우수한 수집율을 보였다. 본 검출기를 소동물용 양정자방출단층 촬영기기에 적용할 경우 우수한 공간분해능 및 에너지 분해능을 통해 우수한 영상의 질을 확보할 수 있을 것이다.

• International Journal of Fluid Machinery and Systems
• /
• 제6권4호
• /
• pp.200-205
• /
• 2013

In order to investigate the characteristics of unsteady flow in a mixed flow pump guide vane under the small flow conditions, several indicator points in a mixed flow pump guide vane was set, the three-dimensional unsteady turbulence numerical value of the mixed flow pump which is in the whole flow field will be calculated by means of the large eddy simulation (LES), sub-grid scale model and sliding mesh technology. The experimental results suggest that the large eddy simulation can estimate the positive slope characteristic of head & capacity curve. And the calculation results show that the pressure fluctuation coefficients of the middle section in guide vane inlet will decrease firstly and then increase. In guide vane outlet, the pressure fluctuation coefficients of section will be approximately axially symmetrical distribution. The pressure fluctuation minimum of section in guide vane inlet is above the middle location of the guide vane suction surface, and the pressure fluctuation minimum of section in which located the middle and outlet of guide vane. When it is under the small flow operating condition, the eddy scale of guide vane is larger, and the pressure fluctuation of the channel in guide vane being cyclical fluctuations obviously which leads to the area of eddy expanding to the whole channel from the suction side. The middle of the guide vane suction surface of the minimum amplitude pressure fluctuation to which the vortex core of eddy scale whose direction of fluid's rotation is the same to impeller in the guide vane adhere.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.15-16
• /
• 2007

A design of a light coupler between a LED and a very thin light guide (0.2mm thickness) is presented. Due to the light guide's very thin thickness, conventional light couplings between LEDs and light guides do not provide enough coupling efficiency. We investigate two different coupling methods: side coupling using a complex-shaped lens and bottom coupling using a grating. This paper presents a draft design of the first approach which couples light from 0.4mm LED to 0.2mm light guide without significant losses.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.113-117
• /
• 2007

A LED light coupler is proposed for coupling light from a mini side LED of 0.4 mm height to a very thin (${\sim}0.3 mm$) light guide. Due to the ultra thinness of the light guide, conventional light couplings between LEDs and light guides do not provide adequate coupling efficiency. The designed LED coupler is a compound lens of 3.5 mm length, 1.2 mm height, and 3.3 mm width. The courier first collimates the light from the LED and then concentrates the light in a manner similar to a compound parabolic concentrate, (CPC) into the light guide. The exit surface of the coupler is additionally textured to have micro patterns in order to control the radiance profile.

• 조명전기설비학회논문지
• /
• 제18권1호
• /
• pp.98-104
• /
• 2004

본 논문에서는 사고나 계획정전 등으로 인한 건전 정전구간에 신속하게 전원을 공급하는 방안을 제시하였다. 제시한 부하복구방안은 연계개폐기로부터 공급피더 방향으로 계통을 역방향으로 탐색하고 탐색시 저장된 경로와의 조합을 이용하여 구해짐으로써 계통의 탐색공간이 대폭 줄어들게 되어 신속한 복구방안의 제시가 가능하다. 또한 공급 여유량을 미리 확보하는 2단계의 부하복구, 모든 구간에 대한 복구가 불가능한 경우 부하를 차단하는 방안 등이 포함되어 있으므로 광역정전이나 다중사고 및 중요수용가를 고려한 부하복구, 배전자동화시스템과 연계된 부하 복구에도 이용할 수 있다.