• Journal of the Korean earth science society
• /
• v.40 no.4
• /
• pp.414-427
• /
• 2019

In East Asia, the long-range transport of dust storms originating from Mongolia and northern China affects airborne dust loadings over downwind areas in the southern Korean Peninsula. Since 1997, dust loading cases caused by dust storms have been observed using the thresholds of total suspended particles (TSP, ${\geq}250{\mu}g\;m^{-3}\;hr^{-1}$) and particulate matter less than $10{\mu}g$ ($PM_{10}$, ${\geq}190{\mu}g\;m^{-3}\;hr^{-1}$) in the central-southern Korean Peninsula. There were two dust loading cases that exceeded these thresholds in 2016 and three in 2017, which reflects the downward trend of the last twenty-one years in the central-southern Korean Peninsula. Furthermore, five other dust loading cases with mass concentrations lower than the thresholds were observed from 2016 to 2017. In the moderate dust loading cases exceeding the thresholds, a descending motion of cut-off lows below $45^{\circ}N$ and a southward trough at 500 hPa gpm isopleths intensified at the western ridge, and largely extended the surface high-pressure system over southeast China. Airborne dust loadings following pronounced north-westerlies in the forward side of the high-pressure system were transported to the surface of the central-southern Korean Peninsula. However, in slight dust loading cases lower than the thresholds, the restricted descending motion of cut-off lows over $45^{\circ}N$ and the southwestward trough at 500 hPa gpm isopleths intensified the zonal flow over the Korean Peninsula. Surface high- and low-pressure systems moved eastward from the source compared to moderate dust loading cases. Due to the zonal movement of dust storms traversing eastern China, slight dust loading cases were observed with relatively higher ratios of $PM_{2.5}/TSP$ and carbon monoxide (CO) in the central-southern Korean Peninsula.

• Advances in concrete construction
• /
• v.6 no.6
• /
• pp.561-583
• /
• 2018

A variety of polycarboxylate ether (PCE)-based superplasticizers are commercially available. Their influence on the rheological retention and slump loss in respect of concrete differ considerably. Fluidity and slump loss are the cardinal features responsible for the quality of concrete. These are related to the dispersion of cement particles and the hydration process which are greatly influenced by type of polycarboxylate ether (PCE)-based superplasticizers. On the backdrop of relatively less studies in the context of rheological retention of high strength self-consolidating concrete (HS-SCC), the experimental investigations were carried out aiming at quantifying the effect of the six different PCE polymers (PCE 1-6) on the rheological retention of HS-SCC mixes containing two types of Ordinary Portland Cements (OPC) and unwashed crushed sand as the fine aggregate. The tests that were carried out included $T_{500}$, V-Funnel, yield stress and viscosity retention tests. The supplementary cementitious materials such as fly ash (FA) and micro-silica (MS) were also used in ternary blend keeping the mix paste volume and flow of concrete constant. Low water to binder ratio was used. The results reveal that not only the PCEs of different polymer groups behave differently, but even the PCEs of same polymer groups also behave differently. The study also indicates that the HS-SCC mixes containing PCE 6 and PCE 5 performed better as compared to the mixes containing PCE 1, PCE 2, PCE 3 and PCE 4 in respect of all the rheological tests. The PCE 6 is a new class of chemical admixtures known as Polyaryl Ether (PAE) developed by BASF to provide better rheological properties in even in HS-SCC mixes at low water to binder mix. In the present study, the PCE 6, is found to help not only in reduction in the plastic viscosity and yield stress, but also provide good rheological retention over the period of 180 minutes. Further, the early compressive strength properties (one day compressive strength) highly depend on the type of PCE polymer. The side chain length of PCE polymer and the fineness of the cement considerably affect the early strength gain.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.5
• /
• pp.97-108
• /
• 2018

"Death is the side of life which is turned away from us." The life of people in Seoul, however, is disconnected from death. Why? This article compares the historical changes in the cemetery disposition of Paris and Seoul to answer this question. The cemetery is always a meeting place between the living and the dead. In pre-modern cities, the cemetery was close to the people's daily life. However, the fundamental change of urban structure due to modernization has a great influence on the cemetery. With the advent of the train, the world has shrunk and the city has expanded unprecedentedly. In such a situation, the cemetery is expelled to the outside of the city. However, while Paris and Seoul share the same overall flow, they responded differently to the plans for the establishment of large-scale remote cemeteries. In Paris, the plan was canceled by citizens who value their relationship with the dead. On the other hand, Seoul was unable to manage the cemetery due to social confusion in 20th century. All cemeteries were expelled as industrialization began. As a result, there is no public cemetery or ossuary at present in Seoul. In Seoul, about 20 years ago however, a new kind of place for the dead began to appear. It is an ossuary attached to religious facilities. In other words, the current cemetery of Seoul is divided into two forms : the public cemetery, which is expelled from the city, and the private ossuary, which is attached to religious facilities built in the city.

• Journal of Hydrogen and New Energy
• /
• v.24 no.2
• /
• pp.150-159
• /
• 2013

To enhance the performance of SEWGS system by holding the WGS catalyst in a SEWGS reactor using bed inserts, effects of insert geometry and shape of WGS catalysts on CO conversion were measured and investigated. Small scale fluidized bed reactor was used as experimental apparatus and WGS catalyst (particle and tablet) and sand were used as bed materials. The parallel wall type and cross type bed inserts were used to hold the WGS catalysts. The CO conversion with steam/CO ratio was determined based on the exit gas analysis. The measured CO conversion using the bed inserts showed high value comparable to physical mixing cases. Moreover, gas flow direction was confirmed by bed pressure drop measurement for each case. Most of input gas flowed through the catalyst side when we charged tablet type catalyst into the bed insert and this can cause low $CO_2$ capture efficiency because the possibility of contact between input gas and $CO_2$ absorbent is low in this case. New bed insert geometry was proposed based on the results from this study to enhance contact between input gas and WGS catalyst and $CO_2$ absorbent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.74-79
• /
• 2021

This study examined the mixing efficiency of exhaust gas and urea according to the mixer shape in the SCR system. For the experiment, an SCR simulation system was manufactured, and a uniformity detector was attached to the catalyst location to measure the uniformity. The experiment was conducted by setting the exhaust-gas flow rate, temperature, mixer type, and catalyst distance as variables. The experimental results confirmed the swirl angle analysis, urea number distribution, and uniformity. The swirl angle experiment of Models A and B confirmed that the swirl angle of Model A was formed approximately 7 to 8 degrees higher over the entire RPM range. When there was no mixer in the SCR system, the urea and water were concentrated to one side. Mixer Model A showed an even distribution overall, and Model B showed a slightly concentrated tendency at the beginning but then showed a stable distribution of urea. The mixing efficiency of 90%, which was the uniformity target, could be satisfied in Model A and Model B. In particular, Model A showed excellent results that satisfied 90% efficiency at 10 cm of the catalyst position.

• Journal of Distribution Science
• /
• v.19 no.1
• /
• pp.61-73
• /
• 2021

Purpose: The transition from a traditional to a modern food distribution system induces several adjustments on the supply side since supermarkets must collect food on a larger scale and with higher quality standards. This situation becomes a real challenge for small scale farmers to access supply in a modern distribution channel. This gives rise to an original solution: supplying supermarkets through farmer associations or cooperatives. Based on this context of Vietnam linking to the case of distribution science, the paper proposes an industrial organization model of the food processing system in developing countries. The model presents the competitive relationship between two competing distribution systems: a traditional and a modern one. The former is composed of several retailers that sell their products on the traditional market while the latter is based on cooperatives that collect food and negotiate with supermarkets. The current study is to discuss the conditions under which the evolution of the food distribution system occurs by using the proposed model. Research design, data, and methodology: Based on the proposed model, the study explored the quantity flow from small producers to consumers through a Nash equilibrium and address the question of farmer repartition by a free-entry equilibrium. Results: The result shows that there is a unique positive equilibrium in the food market with participation of cooperative associations; Since farmers serve cooperative associations, they not only receive quantity incentive prices but also share profits within their organization. Conclusions: This study shows a unique distribution equilibrium where the profits of farmers working for middlemen and cooperatives are maximized. Further insights were discussed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.71-84
• /
• 2020

In order to improve the performance of marine centrifugal pump, a centrifugal pump whose specific speed is 66.7 was selected for the research. Outlet diameter D2, outlet width b2, blade outlet angle β2, blade wrap φ and blade number z of the impeller were chosen as the variables. The maximum weighted average efficiency and the minimum vibration intensity at the base were calculated as objectives. Based on the Latin Hypercube method, the impeller was numerically optimized. The numerical results show that after optimization, the amplitudes of pressure fluctuation on the main frequency at different monitoring points decrease in varying degrees. The radial force on impeller decreases obviously under off-design flow rates and is more symmetrical during the operation of the pump. The variation of the axial force is relatively small, which has no obvious relationship with the rotating angle of the impeller. The energy performance and vibration experiment was performed for verifying. The test results show that the weighted average efficiency under 0.8Qd, 1.0Qd and 1.2Qd increases by 4.3% after optimization. The maximal vibration intensity at M1-M4 on the pump base reduced from 0.36 mm/s to 0.25 mm/s, decreasing by 30.5%. In addition, the vibration velocities of bracket in pump side and outlet flange also have significant reductions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.146-159
• /
• 2021

vehicle simulator as part of an empirical analysis the driving characteristics of elderly drivers. To this end, the driving characteristics of the elderly driver from previous study review. he driving characteristics of the elderly the driving elderly driver and general driverIn summarizing these experimental results, the -test showed different driving characteristics from general drivers in all items except for one side of the lane, such as driving speed and driving operation (brake, throttle, steering operation) at a significance level of 95%. Second, when changing lanes, it was difficult for elderly driver to maintain speed and secure an appropriate distance between carslderly driver changed lanes even in inappropriate situations (short distances between cars). Third, in unexpected situation, elderly drivers needed more distance and time.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.1
• /
• pp.75-83
• /
• 2022

PURPOSE: This study was conducted to investigate the effect of the resistance respiratory muscle exercise with transcutaneous electrical nerve stimulation (TENS) on the respiratory muscle tone and pulmonary function of stroke patients. METHODS: Twenty stroke patients were divided into the TENS group (n = 7), placebo TENS group (n = 7), and control group (n = 6), and each intervention was performed on the three groups 5 times a week for 4 weeks. The assessment was carried out by measuring changes in the muscle tone of the latissimus dorsi and abdominal external obliques, and pulmonary function. RESULTS: In this study, the TENS group and the placebo TENS group had significant increases in the paretic side latissimus dorsi muscle tone, forced vital capacity (FVC), forced expiratory volume in 1 second (FEV1), and peak expiratory flow (PEF). There was no significant difference in changes in respiratory muscle tone between the three groups. The pulmonary function was significantly different between the three groups, and it was observed from the results of the post-hoc test that FVC showed a significant increase in the TENS group and the placebo TENS group compared to the control group. CONCLUSION: Through this study, it was found that the respiratory muscle resistance exercise was more effective as a method to increase respiratory muscle tone and pulmonary function in stroke patients than combined transcutaneous electrical nerve stimulation.

• Journal of Ginseng Research
• /
• v.46 no.1
• /
• pp.167-174
• /
• 2022

Background: 20(S)-protopanaxadiol (20(S)-PPD), one of the main active metabolites of ginseng, performs a broad spectrum of anti-tumor effects. Our aims are to search out new strategies to enhance anti-tumor effects of natural products, including 20(S)-PPD. In recent years, fasting has been shown to be multi-functional on tumor progression. Here, the effects of fasting combined with 20(S)-PPD on hepatocellular carcinoma growth, apoptosis, migration, invasion and cell cycle were explored. Methods: CCK-8 assay, trypan blue dye exclusion test, imagings photographed by HoloMonitorTM M4, transwell assay and flow cytometry assay were performed for functional analyses on cell proliferation, morphology, migration, invasion, apoptosis, necrosis and cell cycle. The expressions of genes on protein levels were tested by western blot. Tumor-bearing mice were used to evaluate the effects of intermittent fasting combined with 20(S)-PPD. Results: We firstly confirmed that fasting-mimicking increased the anti-proliferation effect of 20(S)-PPD in human HepG2 cells in vitro. In fasting-mimicking culturing medium, the apoptosis and necrosis induced by 20(S)-PPD increased and more cells were arrested at G0-G1 phase. Meanwhile, invasion and migration of cells were decreased by down-regulating the expressions of matrix metalloproteinase (MMP)-2 and MMP-9 in fasting-mimicking medium. Furthermore, the in vivo study confirmed that intermittent fasting enhanced the tumor growth inhibition of 20(S)-PPD in H22 tumor-bearing mice without obvious side effects. Conclusion: Fasting significantly sensitized HCC cells to 20(S)-PPD in vivo and in vitro. These data indicated that dietary restriction can be one of the potential strategies of chinese medicine or its active metabolites against hepatocellular carcinoma.