• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.295-298
• /
• 1989

Using the anisotropic etching characteristics or $N_2H_4-H_2O$ solution, Si diaphragm was fabricated for the integrated sensor. The optimal composition and temperature of the solution in Si etching process was established to be 50mol% $N_2H_4$ in water at $105{\pm}2^{\circ}C$ for both higher etch rate(=$2.6{\mu}m/min$) and better surface quality of etched {100} planes. Under the optimal etching condition, the electrochemical etch stop technique was employed to form Si diaphragm for pressure sensor and diaphragm thickness was exactly controlled to $20{\pm}2{\mu}m$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.447-447
• /
• 2012

최근 생물전자공학에서 의료 산업 환경 등 많은 분야에 응용 가능한 바이오센서의 연구가 활발해지고 있다. 그 중 의료 분야에서, 수소이온 ($H^+$)의 농도 감지는 인간의 질병을 예측하는데 중요한 지표가 되며 이러한 수소이온 ($H^+$) 농도의 변화를 실시간으로 감지하기 위해 반도체를 기반으로 한 다양한 pH 센서가 제안되었다. Ion sensitive field effect transistor (ISFET), electrolyte-insulator-semiconductor (EIS)는 대표적인 반도체 pH센서로, 작은 소자 크기, 견고한 구조, 빠른 응답속도와 CMOS 공정과의 호환성이 좋다는 장점이 있다. 특히, EIS는 제조공정이 간단하고 감지막의 감지 특성 평가가 용이하기 때문에 지속적으로 연구되고 있는 pH 센서이다. 센서의 감지 특성을 평가함에 있어 감지막의 감지감도와 안정성이 우수해야 하며 이를 위해 high-k 물질이 감지막으로 사용되고 있다. 추가적으로 high-k 물질은 기존의 $SiO_2$와 $Si_3N_4$를 대신하여 높은 유전상수로 인한 고성능, 고감도 센서제작을 가능케 한다. 본 연구에서는, high-k 물질인 $HfO_2$, $Ta_2O_5$, $ZrO_2$, $Al_2O_3$를 각각 $SiO_2$ 완충막에 적층한 이단 감지막을 제작하였고, 그 특성을 기존의 $SiO_2$, $Si_3N_4$ 감지막의 감지특성과 비교하였다. pH 감지 특성을 평가해 본 결과, 기존의 $SiO_2$, $Si_3N_4$ 감지막과 비교했을 때 high-k 물질의 감지막을 갖는 EIS pH 센서에서 감지감도와 안정성 모두 우수하게 나타났다. 특히, high-k 물질 중 $HfO_2$에서 감지감도가 다소 크게 평가되었으나, 화학적 용액에 대한 안정성은 떨어졌다. 반면에 $Al_2O_3$과 $Ta_2O_5$은 화학용액에 대한 안정성 측면에서 최적의 특성을 보임을 확인하였다. 결론적으로, high-k 물질에 대한 전반적인 평가를 통하여 높은 pH 감지감도뿐만 아니라 우수한 안정성의 EIS pH 센서를 제작 할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.645-652
• /
• 1996

Selective catalytic oxidation of $H_2S$ to elemental sulfur using $TiO_2/SiO_2$ catalysts was investigated in this study. The reaction test with pure $TiS_2$ and $Ti(SO_4)_2$ and cyclic temperature operation revealed that $TiO_2$ had a good resistance to sulfation and sulfidation, which are known as the main cause of catalytic deactivation in sulfur recovery process. With the increase of $TiO_2$ loading amount in $TiO_2/SiO_2$ catalysts, the conversion of $H_2S$ increased and the selectivity of elemental sulfur was very slightly decreased. As the ratio of $O_2/H_2S$ increased, the selectivity to elemental sulfur was drastically decreased. In the presence of 10 vol.% water vapor to a stoichiometric mixture of $H_2S$ and $O_2$($H_2S$= 5 vol.% O=2.5 vol.% ), both activity and selectivity of 10 wt.% $TiO_2/SiO_2$ catalyst are decreased, but it still showed more than 80% of sulfur yield.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.172-181
• /
• 1999

To develop the manufacturing technique for the powder builder of amorphous solid types, the water glass mixed with caustic soda dispersed into the methanol. Thus soluble sodium silicate was made a form of amorphous solid powder. In order to examine characteristics of water soluble sodium silicate $SiO_2/Na_2O$ mol ratio, we investigated solubility, thermogram, SEM, and BET analysis. pH buffering capacity, calcium-ion binding capacity as temperature change, and surfactant loading capacity were examined for characteristics as laundry detergent builder. $SiO_2/Na_2O$ molar ratio of soluble sodium silicate was 1.0, 2.4, 2.8, and zeolite was used in order to investigate basic characteristics of laundry detergent builder. Silicate used with laundry detergent was good for pH buffering capacity and solubility. But calcium-ion binding capacity and surfactant adsorption ability were lower. $SiO_2/Na_2O$ mol ratio became higher, pH buffering capacity and ion exchange ability were lower and surfactant adsorption ability was a little higher.

• Journal of the Korean Ceramic Society
• /
• v.28 no.7
• /
• pp.517-524
• /
• 1991

The CVD process of BPSG (BoroPhosphoSilicate Glass) and its thin film properties were studied. B2H6, PH3, SiH4 and O2 gases were reacted in a AP (Atmospheric Pressure) CVD system in the temperature range of 300℃ and 460℃. The interaction of B2H6 and PH3 was studied from the deposition rate and dopant incorporation change point of view. The dependency of BPSG step coverage on the temperature was changed with different O2/(B2H6+PH3+SiH4) ratio. Finally, the boundary which distinguishes the stable BPSG's from the ones that react with Di (Deionized) water or cleaning chemicals such as H2SO4, HCl, H2O2, NH4OH etc could be defined.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1230-1233
• /
• 2018

$Al_2O_3$ films with the thickness of 50 nm were fabricated on 4H-SiC by aerosol deposition, and their electrical properties were characterized with different post annealing conditions. As a result, the $Al_2O_3$ film annealed in $N_2$ atmosphere showed decreased fixed charge density at the interface area between the $Al_2O_3$ and SiC, and increased leakage currents due to the generation of oxygen vacancies. From this result, it was confirmed that proper $N_2$ and $O_2$ ratio for the post annealing process is important.

• Journal of Powder Materials
• /
• v.21 no.5
• /
• pp.377-381
• /
• 2014

This work describes the coloration, chemical stability of $SiO_2$ and $SnO_2$-coated blue $CoAl_2O_4$ pigment. The $CoAl_2O_4$, raw materials, were synthesized by a co-precipitation method and coated with silica ($SiO_2$) and tin oxide ($SnO_2$) using sol-gel method, respectively. To study phase and coloration of $CoAl_2O_4$, we prepared nano sized $CoAl_2O_4$ pigments which were coated $SiO_2$ and $SnO_2$ using tetraethylorthosilicate, $Na_2SiO_3$ and $Na_2SiO_3$ as a coating material. To determine the stability of the coated samples and their colloidal solutions under acidic and basic conditions, colloidal nanoparticle solutions with various pH values were prepared and monitored over time. Blue $CoAl_2O_4$ solutions were tuned yellow color under all acidic/basic conditions. On the other hand, the chemical stability of $SiO_2$ and $SnO_2$-coated $CoAl_2O_4$ solution were improved when all samples pH values, respectively. Phase stability under acidic/basic condition of the core-shell type $CoAl_2O_4$ powders were characterized by transmission electron microscope, X-ray diffraction, CIE $L^*a^*b^*$ color parameter measurements.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.582-587
• /
• 2006

Decomposition behavior of $ferro-Si_3N_4$was investigated with varying temperature and holding time in mud components for high temperature refractory applications. Porosities gradually increased with increasing temperature and holding time due to the carbothermal reduction of $Si_3N_4\;and\;SiO_2$. Silicon monoxide (SiO) as a intermediate resulted from evaporation of $Si_3N_4\;and\;SiO_2$ reacted with C sources to generate needle-like ${\beta}-SiC$ and Fe in $Si_3N_4$ acted as a catalyst in order to enhance growth of SiC grain with the preferred orientation. SiC generation yield increased with increasing holding time, all of the $Si_3N_4\;and\;SiO_2$ affected on SiC formation up to 2h. However, SiC generation was only dependent on residual $SiO_2$ over 2h, because the carbothermal reduction reaction of $Si_3N_4$ was no longer possible at that time.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.500-506
• /
• 1987

In order to synthesize monodispersed spherical silica fine particles, we investigated the reaction of hydrolysis of 0.05∼4.0 mole Si(OC2H5)4-0.01∼7.60mole NH3 -0.24∼38.40 mole H2O-2.62∼16.88mole C2H5OH systems. The range of the composition of solution which spherical silica particles were formed was enlarged according to an increase in concentration of Si(OC2H5)4. Larger particles were obtained at higher molar ratios of Si(OC2H5)4/C2H5OH, NH3/H2O and H2O/Si(OC2H5)4 and at a lower reaction temperature.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.35-39
• /
• 2023

Silicon oxide thin films have been deposited by plasma-enhanced chemical vapor deposition in SiH4 and N2O plasma along the variation of the gas flow ratio. Optical emission spectroscopy was employed to monitor the plasma and ellipsometry was employed to obtain refractive index of the deposited thin film. The atomic ratio of Si, O, and N in the film was obtained using XPS depth profiling. Fourier Transform Infrared Spectroscopy was used to analyze structures of the films. RI decreased with the increase in N2O/SiH4 gas flow ratio. We noticed the increase in the Si-O-Si bond angles as the N2O/SiH4 gas flow ratio increased, according to the analysis of the Si-O-Si stretching peak between 950 and 1,150 cm-1 in the wavenumber. We observed a correlation between the optical emission intensity ratio of (ISi+ISiH)/IO. The OES intensity ratio is also related with the measured refractive index and chemical composition ratio of the deposited thin film. Therefore, we report the added value of OES data analysis from the plasma related to the thin film characteristics in the PECVD process.