• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.145-152
• /
• 1992

Si surfaces exposed to CHF3/C2F6 gas plasmas ih reactive ion etching (RIE) have been characterized by X-ray photoelectron spectroscopy (XPS). CHF3/C2F6 gas plasma exposure of Si surface leads to the deposition of residual film containing carbon and fluorine. The narrow scan spectra of C 1s show various bonding states of carbon as C-Si, C-F/H, C-CFx(x $\leq$ 3), C-F, C-F2, and C-F3. The chemical bonding states of fluorine are described with F-Si, F-C and F-O. And the oxygen and silicon are also detected. The effects of parameters for reactive ion etching as CHF3/C2F6 gas ratio, RF power, and pressure are investigated.

• Food Science and Preservation
• /
• v.8 no.1
• /
• pp.47-53
• /
• 2001

In order to investigate the effect of two type of ceramic film(15% SiO$_2$ incorporated LDPE, 10% zeolite incorporated LDPE), perforated film and LDPE film on freshness of shiitake mushroom, weight loss, surface color and marketability of mushroom were measured during MA storage at 5 $\^{C}$ and 20$\^{C}$. The effect of packaging films on weight loss and marketability index of shiitake mushroom at 20$\^{C}$ was negligible due to its rapid physiological changes. However, the effect of packaging films on surface color of shiitake mushroom was significant at 20$\^{C}$ storage, but not at 5$\^{C}$ storage. During MA storage of shiitake mushroon, discoloration were reduced effectively by ceramic films and weight loss were by LDPE film, but they had little difference between packaging 51ms. However, there were significant differences among the packaging films in marketability of mushroom induced by water vapor inside package and accelerate its spoilage and browning. Ceramic film(15% SiO$_2$ incorporated LDPE) showed best result to maintain marketability of shiitake mushroom and zeolite incorporated film, perforated film, LDPE film in order.

• Tribology and Lubricants
• /
• v.4 no.2
• /
• pp.44-51
• /
• 1988

Titanium carbide(TiC), Titanium nitride(TiN), and Titanium carbonnitride(Ti(C,N)) films were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$, $TiCl_4-N_2-H_2$, and $TiCl_4-CH_4-N_2-H_2$ gas mixtures, respectively. The experimental results indicate that TiC coatings compared with TiN coatings on $Si_3N_4$ -TiC ceramic have an improved microstructural property, good thermal shock resistance, and good interfacial bonding. However TiN coatings compared with TiC coatings have a low friction coefficient with steel and good chemical stability. It is found by cutting test that coated insert compared with $Si_3N_4$-TiC ceramic have a superior flank and crater wear resistance. And multilayer coating compared with monolayer coating shows a improved wear resistance.

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.400-405
• /
• 1995

ZnO films have been grown easily with the conventional thermal evaporation method on SiO$\_$2/ coated Si wafers. Anhydrous zinc acetate has been used as evaporation source. Zinc-acetate was directly heated in the laboratory-made brass boat. Zinc-acetate was sublimed at the boat temperature of about 220.deg. C. The substrates were heated to 600.deg. C with home made tantalium heater. Oxygen has been flowed into the deposition chamber to change the partial pressure of oxygen. X-ray diffraction patterns showed all the films to be amorphous. The films deposited at high oxygen pressure exhibit higher resistivity than films at low pressure. Energy dispersive spectroscopy(EDS) and rutherford backscattering spectrometry(RBS) were conducted on the films to reveal the composition of the ZnO films.

• Journal of the Korean Vacuum Society
• /
• v.4 no.3
• /
• pp.319-326
• /
• 1995

초고진공에서 Si(100)-2X1 기판 위에 Pt를 약 100$\AA$의 두께로 증착한 후 in-situ로 열처리하는 고상에피택셜 성장법으로 PtSi 박막을 형성시켰다. XRD와 XPS 분석 결과 $200^{\circ}C$로 열처리한 시료에서는 Pt3Si, Pt2Si와 PtSi의 상이 섞여 있었으나 50$0^{\circ}C$로 열처리한 시료에서는 PtSi의 단일상만 확인되었으며, 형성된 PtSi 박막은 주상구조와 판상구조의 이중구조를 나타내었다. 기판 온도를 $500^{\circ}C$로 유지하면서 Pt를 증착한 후 $750^{\circ}C$에서 열처리한 경우에는 판상구조를 갖는 양질의 PtSi 박막이 에피택셜 성장되었다. HRTEM분석 결과 에피텍셜 성장된 PtSi와 기판 Si(100)의 계면은 PtSi[110]//Si[110], ptSi(110)//Si(100)의 정합성을 가졌다. 판상구조를 갖는 PtSi상의 에피택셜 방향은 기판과 열처리 온도에는 의존하나 열처리 시간에는 무관한 것으로 나타났다.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.116-119
• /
• 2000

The a-axis and c-axis prefer oriented SBT thin films could be deposited on Pt(111)/Ti/$SiO_2$$650^{\circ}C$). The c-axis preferred orientation of SBT film can be obtained by Sr deficiency and high compressive stress. However, the a-axis-oriented grains can be formed under stoichiometric Sr content and nearly stress-free state.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.234-240
• /
• 2001

Using RF magnetron sputtering, amorphous carbon(a-C) thin films as electron filed emitter were fabricated. these a-C thin films were deposited on Si(001) substrate at several temperatures. The field electron emission property of these a-C thin films was estimated by a diode technique. As the result, we observed that the field emission properties of the films were changed singnificantly with the substrate temperature and structural features of a-C film. The field emission properties were promoted by higher substrate temperatures. Furthermore N-doped a-C film exhibits more field emission property than that of undoped a-C film. These results are explained as change of surface morphology and structural properties of a-C film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.1
• /
• pp.65-69
• /
• 2003

ZnO-Si-ZnO multi-layer thin films have been deposited by pulsed laser deposition (PLD). And then, the films have been annealed at 300$^{\circ}C$ in oxygen ambient pressure. Peak positions of ultraviolet (UV) and visible region were changed by addition of Si layer. Mobility of the films was improved slightly than ZnO thin film without Si layer. The structural property changed by inserting intermediate Si layer in ZnO thin film. The optical properties and structural properties of ZnO-Si-ZnO multi-layer thin films were characterized by PL(Photoluminescence) and XRB(X-ray diffraction) method, respectively. Electrical properties were measured by van der Pauw Hall measurements

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.113-117
• /
• 1999

SrBi$_2$Ta$_2$$O_{9}$ (SBT) thin films were fabricatcd with different Sr/Bi ratios by MOD. SBT thin films of thickness 2500$\AA$ deposited on Pt/Ti/SiO$_2$/Si were crystallized at $700^{\circ}C$ ~85$0^{\circ}C$ using RTA method. As the Sr/Bi ratio was decreased, dielectric constant and remanent polarization were increased. SrBi$_2$Ta$_2$$O_{9}$ showed a maximum dielectric constant value of $\varepsilon$$_{r}$= 268, and maximum remanent polarization (2Pr) of ~9.86 $\mu$C/$\textrm{cm}^2$ when annealed at 8$0^{\circ}C$ for 8 min.min.n.

• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.337-341
• /
• 2010

In this work, the nanocrystalline ZnO/polycrystalline(poly) aluminum nitride(AlN)/ Si-layered structure was fabricated for humidity sensor applications based on surface acoustic wave(SAW). The ZnO film was used as a sensitive material layer. The ZnO and AlN(0002) were deposited by a sol-gel process and a pulse reactive magnetron sputtering, respectively. The ZnO sensitive films coated on AlN have a hexagonal wurtzite structure after the thin films annealed at $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. The surface of the film exhibits sponginess and a nanometer particle size(below 50 nm). The largest shift in the frequency response was at approximately 200 kHz(the relative humidity: 10 %~90 %) for the structure annealed at $400^{\circ}C$. The effect of the change in the environmental temperature on the frequency response of the SAW humidity sensor was also investigated.