• 제목/요약/키워드: SiC film

검색결과 2,120건 처리시간 0.035초

열선 CVD법에 의한 수소화된 미세결정 실리콘 박막 증착 (Hot Wire Chemical Vapor Deposition of Hydrogenated Microcrystalline Silicon Films)

  • 이정철;강기환;김석기;윤경훈;송진수;박이준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 D
    • /
    • pp.1928-1930
    • /
    • 1999
  • This paper describes on the growth of a ${\mu}c$-Si:H film on low cost substrate like glass by Hot Wire CVD method. The ${\mu}c$-Si:H film, prepared in 50mTorr pressure, $1800^{\circ}C$ wire temperature, and $H_2/SiH_4$ 10 showed three clear peaks. (111), (220), and (311) in X-ray spectroscopy. The crystallite size and crystalline volume fraction, calculated from Raman spectroscopy, was about 6nm and 70%, respectively. The FTIR transmission spectra of the film showed a different absorption peak with a-Si:H film around $2000-2100cm^{-1}$.

  • PDF

Characterization of Monocrystalline $\beta-SiC$ Thin Film Grown by Chemical Vapor Deposition

  • 김형준
    • 한국세라믹학회:학술대회논문집
    • /
    • 한국세라믹학회 1986년도 Priceedings Of The Third Korea-Japan Seminar On New Ceramics
    • /
    • pp.287-304
    • /
    • 1986
  • High quality monocrystalline $\beta$-SiC thin films were grown via two-step process of conversion of the Si(100) surface by reaction with $C_2H_4$ and the subsequent chemical vapor deposition (CVD) at $1360^{\circ}C$ and 1 atm total pressure. Four dopants, B and Al and p-type, and N and P for n-type, were also incorporated into monocrystalline $\beta$-SiC thin films during the CVD growth process. IR and Raman spectroscopies were used to evaluate the quality of the undoped $\beta$-SiC thin films and to investigate the effects of dopants on the structure of the doped $\beta$-SiC thin films. The changes in the shape of IR and Raman spectra of the doped thin films due to dopants were observed. But the XTEM micrographs except for the B-doped and annealed films showed the same density and distribution of stacking faults and dislocations as was seen in the undoped samples, The IR and Raman spectra of the B-doped and annealed films showed the broad and weak bands and one extra peak at the 850 $cm^{-1}$ respectively. The SAD pattern and XTEM micrograph of the B-doped and annealed film provided the evidence for twinning.

  • PDF

Magnetron sputtering으로 증착한 ZnO 박막의 특성과 열처리에 따른 비저항과 미세구조 (A properties of ZnO thin film deposited by magnetron sputtering and its resistivity and microstructure due to annealing)

  • 이승환;성영권;김종관
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제10권2호
    • /
    • pp.126-133
    • /
    • 1997
  • In order to apply for the gas sensing layer and the piezoelectric thin film devices, we studied the effects of magnetron sputtering conditions and annealing temperature on the electrical and structual characteristics of the ZnO thin film. The optimal deposition conditions, in order to obtain a c axis of the ZnO (002) phase thin film which is perpendicular to SiO$_{2}$/Si substrate, were like these ; substrate temperature 150.deg. C, chamber pressure 2 mtorr, R.F. power 300 watts, gas flow ratio 0.4[O$_{2}$(Ar + $O_{2}$)]. When the ZnO thin film was annealed in 600.deg. C, $O_{2}$ gas ambient for 1 hr, the resistivity was 2.6 x 10$^{2}$.ohm.cm and the grain size of ZnO thin film was less than 1 .mu.m. So the ZnO thin film acquired from above conditions can apply for the gas sensing layer which require a c axis perpendicular to the substrate surface.

  • PDF

MOCVD 법에 의한 CdTe/Si 박막성장 (MOCVD of CdTe thin films on Si substrates)

  • 김광천;권성도;최지환;김현재;김진상
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.451-451
    • /
    • 2009
  • CdTe는 에너지밴드갭이 1.45eV인 직접천이헝 II-VI 화합물 반도체로서 높은 광홉수율과 가시광 영역의 에너지밴드캡으로 태양전지, x-선 검출기 등에 널리 사용되고 있다. 본 연구에서는 Metal Organic Chemical Vapor Deposition (MOCVD)으로 Si 기판위에 CdTe 에피 박막을 성장 하고자 하였다. Cd, Te의 금속유기 화합물로는 Dimethylcadmium(DmCd)과 Diisopropyltellurium(DIPTe)을 사용하였다. 기판으로는 Si 을 사용하였으며 박막성장 온도를 $360^{\circ}C\;{\sim}\;500^{\circ}C$로 제어하여 에피박막이 형성되는 조건을 얻고자 하였다. $360^{\circ}C$, $450^{\circ}C$에서 성장된 CdTe박막은 다양한 방향이 존재하는 다결정 구조 였으며 $500^{\circ}C$의 경우 단결정 에피 박막 성장이 이루어졌음을 확인하였다. 본 연구를 통한 CdTe 에피박막은 기존의 열증착 등으로 제조되는 다결정 CdTe 박막과 비교하여 높은 에너지변환 효율을 얻을 것으로 기대된다.

  • PDF

열교환 부품용 발열체 형성기술 (The Formation Technique of Thin Film Heaters for Heat Transfer Components)

  • 조남인;김민철
    • 반도체디스플레이기술학회지
    • /
    • 제2권4호
    • /
    • pp.31-35
    • /
    • 2003
  • We present a formation technique of thin film heater for heat transfer components. Thin film structures of Cr-Si have been prepared on top of alumina substrates by magnetron sputtering. More samples of Mo thin films were prepared on silicon oxide and silicon nitride substrates by electron beam evaporation technology. The electrical properties of the thin film structures were measured up to the temperature of $500^{\circ}C$. The thickness of the thin films was ranged to about 1 um, and a post annealing up to $900^{\circ}C$ was carried out to achieve more reliable film structures. In measurements of temperature coefficient of resistance (TCR), chrome-rich films show the metallic properties; whereas silicon-rich films do the semiconductor properties. Optimal composition between Cr and Si was obtained as 1 : 2, and there is 20% change or less of surface resistance from room temperature to $500^{\circ}C$. Scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) were used for the material analysis of the thin films.

  • PDF

Thermal stabilityof fluorine doped silicon oxide films

  • Lee, Seog-Heong;Yoo, Jae-Yoon;Park, Jong-Wan
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제2권1호
    • /
    • pp.25-31
    • /
    • 1998
  • The reliability of fluorine doped silicon oxide (SiOF) films for intermetal dielectrics in multilevel interconnections of ultra-large scale integrated circuits (ULSIs) is investigated. SiOF films were deposited by electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECRPECVD) using H-free source gases, i.e., SiF4 and O2. The effect of post plasma treatment on the moisture absorption and dielectric properties of SiOF films was carried out I terms of air exposure time, The reliability test of Cu/TiN/SiOF/Fi specimen was carried out in terms of temperature by rapid thermal annealing (RTA) in N2 ambient. After O2 plasma treatment,, no appreciable peak directly related to moisture absorption was detected. The capacitance-voltage (C-V) characteristics of the O2 plasma treated SiOF film showed that the film remained to hold the sound dielectric properties even after boiling treatment. The Cu/TiN/SiOF/Si system was found to be reliable up to $600^{\circ}C$.

Ni-Cr 박막 저항의 특성에 미치는 열처리 조건의 영향 (Effect of Annealing Conditions on Properties of Ni-Cr Thin Film Resistor)

  • 류승목;명성재;구본급;강병돈;류제천;김동진
    • 마이크로전자및패키징학회지
    • /
    • 제11권1호
    • /
    • pp.37-42
    • /
    • 2004
  • 최근에 3 ㎓이상의 고주파용 전자부품과 소자의 제조에 낮은 저항온도계수(TCR)값과 높은 정밀도를 갖는 박막저항이 사용되고 있다. Ni-Cr 박막저항은 낮은 TCR 값과 저항에 대한 높은 안정성 때문에 저항 물질로 사용되는 가장 일반적인 물질이다. 본 연구에서는 $Ni_{72}Cr_Al_3Mn_4Si$(wt%)이 첨가된 우수한 저항특성을 갖는 S-type의 Evanohm 합금 타겟과 스퍼터링 장비를 이용하여 박막 저항을 제조하였다. 또한 열처리 조건을 $200^{\circ}C$, 300$300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$로 변화시키면서 고주파 박막 저항의 미세구조와 전기적 특성을 관찰하여 최상의 열처리 조건을 알아보았다.

  • PDF

Ni-Cr 박막 저항의 특성에 미치는 열처리 조건의 영향 (Effect of Annealing Conditions on Properties of Ni-Cr Thin Film Resistor)

  • 류승록;명성재;구본급;강병돈;류재천;김동진
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
    • /
    • pp.145-150
    • /
    • 2003
  • 최근에 3 GHz이상의 고주파용 전자부품과 소자의 제조에 낮은 TCR 값과 높은 정밀도를 갖는 박막저항이 사용되고 있다. Ni-Cr 박막저항은 낮은 TCR 값과 저항에 대한 높은 안정성 때문에 저항 물질로 사용되는 가장 일반적인 물질이다. 본 연구에서는 $Ni_{72}Cr_{20}Al_3Mn_4Si(wt\%)$ 첨가된 우수한 저항특성을 갖는 s-type의 Evanohm 합금 타겟과 스퍼터링 장비를 이용하여 박막 저항을 제조하였다. 또한 열처리 조건을 $200^{\circ}C,\;300^{\circ}C,\;400^{\circ}C,\;500^{\circ}C$로 변화시키면서 고주파 박막저항의 미세구조와 전기적 특성을 관찰하여 최상의 열처리 조건을 알아보았다.

  • PDF

열 필라멘트 CVD법에 의해서 제작한 다이아몬드 막의 잔류응력제어 (Control of Residual Stress in Diamond Film Fabricated by Hot Filament CVD)

  • 최시경;정대영;최한메
    • 한국세라믹학회지
    • /
    • 제32권7호
    • /
    • pp.793-798
    • /
    • 1995
  • The relaxation of the intrinsic stresses in the diamond films fabricated by the hot filament CVD was studied, and it was confirmed that the tensile intrinsic stresses in the films could be controlled without any degradation in the quality of the diamond films. The tensile intrinsic stresses in the films decreased from 2.97 to 1.42 GPa when the substrate thickness increased from 1 to 10mm. This result showed that the residual stress was affected by the substrate thickness as well as by the interaction between grains. Applying of +50 V between the W filament and the Si substrate during deposition, the tensile intrinsic stress in the film deposited at 0 V was decreased from 2.40 GPa to 0.71 GPa. Such large decrease in the tensile intrinsic stress was due to $\beta$-SiC which acted as a buffer layer for the stress relaxation. However, the application of the large voltage above +200V resulted in the change of quality of the diamond film, and nearly had no effect on relaxation in the tensile intrinsic stress.

  • PDF

마이크로 열 센서용 측온저항체 온도센서의 제작 및 특성 (The Fabrication and Characteristics of RTD(Resistance Thermometer Device) for Micro Thermal Sensors)

  • 정귀상;홍석우
    • 센서학회지
    • /
    • 제9권3호
    • /
    • pp.171-176
    • /
    • 2000
  • 반응성 스퍼터링과 고주파 마그네트론 스퍼터링으로 각각 증착된 MgO 박막과 그 위에 증착된 백금박막의 열처리 온도 및 시간에 따른 물리적, 전기적 특성을 4침 탐침기, 주사전자현미경 및 X선 회절법을 이용하여 분석하였다. $1000^{\circ}C$, 2시간의 열처리 조건하에서 MgO 박막은 백금박막과 화학적 반응없이 백금박막의 열산화막에 대한 부착특성을 개선시켰으며, 그 위에 증착된 백금박막의 면저항 및 비저항은 각각 $0.1288\;{\Omega}/{\square}$, $12.88\;{\mu}{\Omega}{\cdot}cm$이었다. Lift-off 방법을 이용하여 $SiO_2$/Si기판상에 백금 저항체를 만들었으며, 백금 와이어, 백금 페이스트 그리고 SOG를 이용하여 마이크로 열 센서용 박막형 Pt-RTD를 제작하였다. $25{\sim}400^{\circ}C$의 온도범위에서 $1.0{\mu}m$의 두께를 갖는 제작된 Pt-RTD의 저항온도계수는 벌크 백금에 가까운 $3927ppm/^{\circ}C$로 측정되었다. 측정온도범위내에서 저항값은 선형적인 변화를 보였다.

  • PDF