• Korean Journal of Ichthyology
• /
• v.28 no.2
• /
• pp.110-115
• /
• 2016

This study was conducted in order to investigate the growth and morphological development of Cypselurus hiraii larvae and to obtain basic data for taxonomic research. Specimens for this study were collected using a scoop net (aperture Ø60 cm) at the Geomun Island in Yeosu-si, Jollanam-do in July and August of 2013, and the mean water temperature was $20.6{\pm}1.84^{\circ}C$ and the mean salinity was $32.1{\pm}0.46$‰ during the collection. In post-larvae of total length 9.58~9.69 mm (average $9.63{\pm}0.04mm$, n=5), the mouth was opened, and the maxilla was shorter than the mandible. The length of the dorsal fin did not exceed that of the ventral fin, and the dorsal fin was on the same line as that of the ventral fin. In post-larvae of total length 18.0~18.5 mm (average $18.2{\pm}0.22mm$, n=5), with the growth accelerated, the pectoral fin was developed broadly and their caudal fin was differentiated into the heterocercal tail. These characteristics suggest the development of swimming ability and resultant active feeding activities. In post-larvae of total length 22.4~23.0 mm (average $22.7{\pm}0.21mm$, n=5), striped melanophores deposited in the pectoral fin, and small spot-like melanophores expanded in the processes formed on the mandible. The dorsal and anal fins were on the same line, and the anal fin was situated behind the dorsal fin.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.93-93
• /
• 2005

• Journal of Fisheries and Marine Sciences Education
• /
• v.5 no.1
• /
• pp.31-44
• /
• 1993

Through the early 1900's, the evolution of the surface condenser was closely tied to the development of steam engine and the turbine. As the chemical and petroleum industries evolved in the 1900's, the use of surface condensers in many different processes. Today, industry uses condensers in many shapes and sizes. The actual condensation process occurs on the outside surface of tubes. The nature of this surface geometry affects the condenser's heat transfer performance. The first condensers were built with plain tubes. As tube manufacturing techniques advanced, manufacturers started making tubes with integral fins. In the 1940's, fin densities were limited to about 600 to 700 fins per meter(fpm) because of manufacturing procedure. Today new manufacturing techniques allow production of tubes with fin densities ranging from 750 to 1600 fpm. The integral-fin tubes investigated in this paper are nominally 19 mm diameter. Eight tubes have been used with trapezodially shaped integral-fins having fin density from 748 to 1654 fpm and 10, 30 grooves. For comparison, tests are made using a plain tube having the same inside diameter and an outside diameter equal to that at the root of the fins for the finned tubes. Betty and Katz's theoretical modelis is used to predict the R-11 condensation coefficient on horizontal integral-fin tubes having 748, 1024 and 1299 fpm. Experiments are carried out using R-11 as working fluid. The refrigerant condensates at a saturation state of $30^{\circ}C$ on the outside tube surface cooled by coolant. The amount of noncondensable gases present in the test loop is reduced to a negligible value by repeated purging. For a given heat input to the boiler and given cooling water flow rate, all test data are taken at steady state. The observed heat transfer enhancement for the finned and grooved tubes significantly exceeded that to be expected on grounds of increased area. For the eight fin tubes and one plain tube tested, the best performance has been obtained with a tube having a fin density of 1299 fpm, and a fin bight of 1.2mm and 30 grooves.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1920-1925
• /
• 2007

A transformer is a device that changes the current and voltage by electricity induced between coil and core steel, and it is composed of metals and insulating materials. In the core of the transformer, the thermal load is generated by electric loss and the high temperature can make the break of insulating. So we must cool down the temperature of transformer by external radiators. According to cooling fan's usage, there are two cooling types, OA(Oil Natural Air Natural) and FA(Oil Natural Air Forced). For this study, we used Fluent 6.2 and analyzed the cooling characteristic of radiator. we calculated 1-fin of detail modeling that is similar to honeycomb structure and multi-fin(18-fin) calculation for OA and FA types. For the sensitivity study, we have different positions(side, under) of cooling fans for forced convection of FA type. The calculation results were compared with the measurement data which obtained from 135.45/69kV ultra transformer flowrate and temperature test. The aim of the study is to assess the Fluent code prediction on the radiator calculation and to use the data for optimizing transformer radiator design.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.70-72
• /
• 2007

A single specimen of the family Agonidae was collected from the coastal waters of the East Sea, Korea. It was identified as Hypsagonus corniger Taranetz by having the first dorsal fin with seven spines, long supraoccipital spine, sharp spines of body plate, no process on the supralateral bony plates, the broader distance between the first and the second dorsal fins than base of the second dorsal fin, and longer second spine of the first dorsal fin than the first spine. A key to the genus Hypsagonus from Korea is provided. We propose a new Korean name, "Ga-si-jul-go-gi" for the species.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.870-875
• /
• 2004

Heat flow characteristics in the newly developed Wave Heat Sink were analyzed under natural and forced convections by Icepak program using the finite volume method. Temperature distribution and thermal resistance of Wave Heat Sink with/without air vent hole on the top of fin were compared with those of a commercial Al extruded heat sink(Intel Heat Sink). Under the natural convection, the maximum temperature was $45.1^{\circ}C$ in the air vent hole typed Wave Heat Sink, which was superior to that of Intel Heat Sink. The thermal resistance was $2.51^{\circ}C/W$ in the air vent hole typed Wave Heat Sink, and it changed to $2.65^{\circ}C/W\;and\;2.16^{\circ}C/W$ with changes of gravity direction and fin height, respectively. Under the forced convection, the maximum temperature became lower than that under the natural convection. In addition, the thermal resistance lowered in the air vent hole typed Wave Heat Sink with higher fin height and it decreased with increasing the air flux.

• Journal of Fisheries and Marine Sciences Education
• /
• v.5 no.2
• /
• pp.119-127
• /
• 1993

This work studies for heat transfer and pressure drop performance of integral inner and outer fin tubes, designed to enhance the heat transfer performance of smooth tubes for in recipro and turbo refrigerator or high performance compact heat exchangers. Eight different inner spiral fin copper tubes with integral fin at outside surfaces were employed to improve boiling heat transfer coeffcient. For comparison, tests were made using a plain tube having the inside diameter and an outside diameter equal to that at the root of the fins for the finned tubes. Pool boiling heat transfer is investigated experimentally and theoretically on single tube arrangement. The refrigerant evaporates at a saturation state of 1 bar on the outside tube surface heated by hot water. The refrigerant R11 ($CFCl_3$) was used at a pressure of $P_s=1bar$ as a convenient test fluid with a boiling temperature of $T_s=23.6^{\circ}C$. The observed heat transfer enhancement of boiling for finned tubes significantly exceeded that to be expected on grounds of increased area. The maximum Vapor - side enhancement(i.e., vapor - side heat transfer coefficient of finned tube/vapor - side coefficient for plain tube) was found to be around 4 at 1299fpm - 30grooves tube.

• Korean Journal of Ichthyology
• /
• v.35 no.3
• /
• pp.189-193
• /
• 2023

Two specimens of Omobranchus fasciolatoceps (33.8~46.7 mm SL) were collected from oyster reefs of Osu-ri, Geoje-myeon, Geoje-si, Gyeongsangnam-do, Korea. This species is characterized by having 32~34 dorsal fin rays, 24~25 anal fin rays, 13 pectoral fin rays, 2 interorbital pores, 8 circumorbital pores, 5~7 lateral line tubes, fleshy crest on head and sexual dimorphism in female that have lost the posterior canines in both jaw. We propose the new Korean name, "Ppul-be-do-ra-chi", for the species.

• Korean Journal of Ichthyology
• /
• v.13 no.2
• /
• pp.117-122
• /
• 2001

Three species, Gymnogobius urotaenia, G. sp. 1 and G. sp. 2, collected at Hosan-river, Hosan-ri, Samcheock-si, Gangwon-do, Korea, were examined for the study of sexual dimorphism. The three species have peculiar nuptial pigmentation during the breeding season: all females of the three species showed an intense black coloration on the ventral part of the head, the pelvic fin, the anal fin and the margin of the first dorsal fin. There was a difference between G. sp. 1 and the other two species in 1/3 from margin of first dorsal fin. Namely, G. sp. 1 showed an intense black coloration, whereas the other two species had an intense yellow coloration. All females of the three species showed the same, intensely yellow coloration in the ventral part of the body. Males of G. urotaenia and G. sp. 2 had almost the same nuptial pigmentation, however the former showed diffuse black coloration in the anal fin, whereas the latter had an intensely black anal fin. Males of G. sp. 1 differed from those of the other two species in their yellow color on the ventral part of the head, the pelvic f ins, the anal fin, in contrast to the diffuse black coloration in those parts in the other species. The genital papilla of males was triangle-shaped, but that of females was heart-shaped. Significant differences between sexes include: G. urotaenia, 7 characters (body depth, head length, snout length, upper jaw length, head depth, pectoral fin ray length, eye diameter); G. sp. 1, 11 characters (body depth, head length, caudal peduncle length, caudal peduncle depth, snout length, upper jaw length, head width, head depth, anal fin ray length, pectoral fin ray length and caudal fin ray length); G. sp. 2, 10 characters (body depth, head length, caudal peduncle depth, snout length, upper jaw length, head width, anal fin ray length, pectoral f in ray length, caudal fin ray length and eye diameter). Of the 5 characters which showed differences in all three species (body depth, head length, snout length, upper jaw length and pectoral fin ray length), females had higher values than males only in body depth, whereas males values in all other characters. The upper jaw length was the most distinctive sexually dimorphic feature, the upper jaw extended beyond the posterior margin of the eyes (p<0.001) in males but not in females.

• Animal Systematics, Evolution and Diversity
• /
• v.30 no.1
• /
• pp.22-25
• /
• 2014

Two species of small gobiid fishes genus Luciogobius, i.e., L. elongatus, L. platycephalus were described as the first records from Korea based on specimens collected from gravel beaches of Gijang-gun, Busan-si, Korea. Luciogobius elongatus is distinguished from congeners by very elongated and naked body, 42-44 vertebrae, 6-7 dorsal soft rays, and no free rays on pectoral fin, and L. platycephalus is characterized by having very depressed head, naked body, 40-41 vertebrae, 10-11 dorsal soft rays, and pectoral fin with only upper 2-4 free rays. We propose the new Korean name "Ga-neun-mi-kkeun-mang-dug", "Nab-jak-mi-kkeun-mang-dug" for L. elongatus and L. platycephalus, respectively.