• 한국자기학회지
• /
• 제5권5호
• /
• pp.561-566
• /
• 1995

Additional magnetooptical Kerr effect (AMOKE) was observed in several multilayer structures. For Fe/Pd and Co/Cu Multilayers, AMOKE enhanced the Kerr rotation in short wavelength side, while for Fe/Ag and FeSi/Cu multilayer systems the Kerr rotation enhancement appeared in long wavelength side. A number of ferromagnetic/nonmagnetic/ferromagnetic(FM/NM/FM) sandwiches showed that the AMOKE led to oscillations of Kerr rotation and Kerr ellipticity in certain wavelength range with changing NM layer thickness similar to the oscillatory interlayer coupling. The oscillation of effective optical constants related to the MOKE oscillation was observed for the first time. The mechanisms of the AMOKE were discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1207-1212
• /
• 2004

A model for the phonon dispersion relationship for cubic zinc sulfide structure, for example SiC, is developed in terms of two unknown force constants. Born model that incorporates bond bending and bond stretching, is used for the force constants. The force constants are determined by fitting to experimental data. Using only the nearest-neighbor coupling results in $6{\times}6$ sized dynamic matrix. The eigenvalues of dynamics matrix for each wavenumber in 3-D ${\kappa}$ space correspond to frequencies, 3 for optical phonon and 3 for acoustic phonon, which is so-called dispersion relation (${\kappa}$-${\omega}$). The density of state is determined by counting the states for each frequency bin, and the properties such as specific heat and thermal conductivity can be obtained. The specific heat is estimated on this model and compared with experiment and other models, i.e. Debye model, Einstein model and combined Debye-Einstein model. In spite of the simple bond potential model, reasonable agreements are found.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1986년도 추계학술대회
• /
• pp.510.1-510
• /
• 1986

Many enzymes require the participation of readily dissociable coenzymes as NAD for thir catalytic activities. The continuous utilization of the enzymes requires the retention and regeneration of the coenzymes. For this purpose, several kinds of macromolecular NAD derivatives have been prepared by covalently attaching NAD to watersoluble polymers. We have prepared poly (ethylene glycol)-bound NAD (PEG-NAD) by coupling N$\^$6/-(2-carboxyethyl)-NAD to one terminal of ${\gamma}$ $\omega$-diaminoly (ethylene glycol) (Mr 3000) with water-soluble carbodiimide. PED-NAD thus obtained has one NAD moiety located at a terminal of the linear, flexible and hydrophilic chain of poly (ethylene glycol). PED-NAD has good coenzyme activity for various dehydrogenases and is applicable in a continuous enzyme reactor. To use these macromolecular NAD derivatives in an enzyme reactor, it si necessary to understand the behavior of the system in which the reactions of dehydrogenases are coupled by the recycling of the NAD derivative. We investigated the kinetic properties of a continuous enzyme reactor containing lactate dehydrogenase, alcohol dehydrogenase and PEG-NAD. The steady-state behavior of the enzyme reactor is explained by a simple kinetic model.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.905-909
• /
• 2007

Crystalline and micro-structural characteristics of ZnO thin films which were deposited on p-Si(100) with cooling naturally down of pre-heated substrate during RF magnetron sputter deposition, were investigated by XRD and SEM in this paper. The film which was prepared on the substrate which was pre-heated to $400^{\circ}C$ before deposition and then cooled naturally down during deposition, showed the most outstanding c-axis preferred orientation. The ZnO thin film having the best crystalline result were applied to SMR type FBAR device and resonance properties of the device were investigated by network analyzer. It showed that resonance frequency was 2.05 GHz, return loss was -30.64 dB, quality factor was 3169 and electromechanical coupling factor was 0.4 %. This deposition method would be very useful for application of surface acoustic wave filter or film bulk acoustic wave resonator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.916-917
• /
• 2001

We investigated the properties of a hybrid type superconducting fault current limiter (SFCL), which consists of a transformer with multiple secondary windings and resistive $YBa_2Cu_3O_7$ (YBCO) thin film stripes. The secondary windings of the transformer were coupled with each other, and a superconducting current limiting unit of YBCO stripes was connected to each of them as a switch. Simple connection in series of SFCL units tends to produce imbalance in power among the units due to slight differences in quench current. In current design, magnetic coupling between the SFCL units provides a solution to power dissipation imbalance, inducing simultaneous quench by current redistribution in the YBCO films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1305-1308
• /
• 2008

In this study, we redesigned the reliable integrated on-panel display gate driver that was equipped with dual pull-down as well as controlled discharge-path structure to reduce the high voltage stress effect and realized with TSMC 0.35 um CMOS-based technology before. An improved discharge path and a low noise design are proposed for our new a-Si TFT process implementation. Our novel reliable gate driver design can make each cell of shift register to be insensitive to the coupling noise of that stage.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.39.2-39.2
• /
• 2010

Recently, hot stamping process has been paid attention greatly by automobile makers in accordance with the fuel efficiency and environmental issues as well as crash safety issue. The hot-stamped parts, however, demand extreme mechanical properties such as tensile strength of over 1470 MPa or equivalently Vickers hardness of around 450. In this work, to meet the demand efficiently, a method to predict mechanical property of hot-stamped parts based on numerical phase transformation scheme has been proposed associated with the thermo-mechanical coupled finite element analysis. This work deals with various phase transformation equations and validates them to select appropriate model for 0.2C-0.1Si-1.4Mn-0.5Cr-0.01Mo-0.002B steel sheet. The authors show that an efficient method saving time and cost to develop hot-stamped automobile parts ensuring suitable mechanical properties such as Vickers hardness and strength.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2989-2992
• /
• 2009

An efficient synthetic route of novel 2′(${\alpha}$)-C-fluoro-2′(${\beta}$)-C-methyl carbocyclic nucleoside analogues is described. The key fluorinated intermediate 7 was prepared from the epoxide intermediate 5 via selective ring-opening of epoxide. Coupling of 7 with nucleosidic bases under the Mitsunobu reactions followed by deprotection afforded the target carbocyclic nucleoside analogues. The synthesized compounds were evaluated as inhibitors of the hepatitis C virus (HCV) in Huh-7 cell line in vitro.

• Journal of Magnetics
• /
• 제14권1호
• /
• pp.15-17
• /
• 2009

The magnetostatic interaction between the two magnetic nanowires was studied by using the longitudinal magneto-optical Kerr effect (MOKE). For this purpose two magnetic nanowires having different widths (400 nm, 800 nm) were fabricated on an Si substrate with electron beam lithography and the lift-off method. Magnetic hysteresis loops measured by MOKE showed double switching behavior, corresponding to the separated switching fields of each wire. The switching field of the narrow wire was greatly affected by the separation between the two wires. Based on how the switching field changes with decreasing separation, it is concluded that the magnetostatic field of the 800-nm wire strongly affects the switching of the 400-nm wire when the separation is less than $0.5{\mu}m$.

• 대한화장품학회지
• /
• 제13권1호
• /
• pp.15-28
• /
• 1987

Silica spheres were prepared by interfacial reaction method. Factors in-fluencing to the mean particle size and specific surface area of silica spheres were investigated. The experiment about the surface modification of silica spheres was carried out. It was observed that silica spheres have characteristics of the spherical shape with the vacancy in the inner side, high surface area, and reaction tendency by many silanol group. The mean particle size of silica spheres is dependent on the surfactant concentration and W/O ratio. The specific surface area is influenced by SiO2/Na2O mole ratio in sodium silicate. Silica spheres coated with titanium dioxide or zirconium dioxide improve the UV protection effect. Titanate and silane coupling agent make chemical bond with silica surface and improve the organophile and the dispersibility of silica spheres.