• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.301-307
• /
• 2013

SiC hollow fiber was fabricated by curing, dissolution and sintering of Al-PCS fiber, which was melt spun the polyaluminocarbosilane. Al-PCS fiber was thermally oxidized and dissolved in toluene to remove the unoxidized area, the core of the cured fiber. The wall thickness ($t_{wall}$) of Al-PCS fiber was monotonically increased with an increasing oxidation curing time. The Al-PCS hollow fiber was heat-treated at the temperature between 1200 and $2000^{\circ}C$ to make a SiC hollow fibers having porous structure on the fiber wall. The pore size of the fiber wall was increased with the sintering temperature due to the decomposition of the amorphous $SiC_xO_y$ matrix and the growth of ${\beta}$-SiC in the matrix. At $1400^{\circ}C$, a nano porous wall with a high specific surface area was obtained. However, nano pores grew with the grain growth after the thermal decomposition of the amorphous matrix. This type of SiC hollow fibers are expected to be used as a substrate for a gas separation membrane.

• 한국정보통신학회논문지
• /
• 제12권9호
• /
• pp.1615-1622
• /
• 2008

경사형 스페이서와 LDD 영역을 갖는 다결정 실리콘 TFT를 제작하였다. 소자 특성의 신뢰성을 위해 수소($H_2$)와 수소/플라즈마 처리 공정으로 수소 처리된 n-채널 다결정실리콘 TFT 소자를 제작하였다. 소자에 최대 누설전류의 게이트 전압 조건에서 소자에 스트레스를 인가시켰다. 게이트 전압 스트레스 조건에 의해 야기되는 열화 특성인자들인 드레인 전류, 문턱전압($V_{th}$), 부-문턱전압 기울기(S), 최대 전달 컨덕턴스($g_m$), 그리고 파워인자 값을 측정/추출하였으며, 수소처리 공정이 소자 특성의 열화 결과에 미치는 관계를 분석하였다. 특성 파라미터의 분석 결과, 수소화 처리시킨 n-채널 다결정 실리콘 박막 트랜지스터에서 열화특성의 원인들은 다결정실리콘/산화막의 계면과 다결정 실리콘의 그레인 경계에서 실리콘-수소 본드의 해리에 의한 현수 본드의 증가이었다. 따라서 새로 제안한 다결정 TFT의 구조는 제작 공정 단계가 간단하며, 소자 특성에서 누설전류가 드레인 영역 근처 감소된 수평 전계에 의해 감소되었다.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.714-722
• /
• 2019

산 염기성질이 다양하게 존재하는 담체($SiO_2-Y_2O_3$, $Al_2O_3$, $SiO_2-ZrO_2$, $SiO_2$, $TiO_2$, MgO) 상에 17 wt% Ni을 고정한 상태에서 함침법을 사용하여 촉매를 제조하여 수소 존재 하에 에탄올과 암모니아의 환원성 아민화 반응에 대한 촉매활성을 비교 평가하였다. 반응 전후에 있어 사용된 촉매는 X-선 회절, 질소 흡착, 에탄올-승온탈착(EtOH-TPD), 이소프로판올-승온탈착(IPA-TPD), 수소 화학흡착을 사용하여 특성분석을 수행하였다. pH 9.5 이상에서 침전법을 사용하여 $ZrO_2$와 $Y_2O_3$ 담체 제조 시 파이렉스 반응기에서 미량의 Si 용융으로 인해 $SiO_2-ZrO_2$와 $SiO_2-Y_2O_3$ 복합 산화물이 각각 생성되었다. 사용된 촉매 중에서 $Ni/SiO_2-Y_2O_3$ 촉매가 가장 좋은 활성을 보였으며 이는 높은 니켈 분산도와 EtOH-TPD와 IPA-TPD에서의 낮은 탈착온도 등과 밀접한 관련이 있었다. Ni/MgO 촉매상에서의 낮은 촉매 활성은 NiO-MgO 고형물 형성에 기인한 것으로 보이며, $Ni/TiO_2$ 경우에서는 담체-금속 간의 강한 상호 작용으로 인해 낮은 니켈 금속 상 존재로 인해 반응성이 낮게 나왔다. $TiO_2$와 MgO 이외의 담체를 사용한 경우에 있어서 유사한 에탄올 전환율에서의 에틸아민류와 아세토니트릴 선택도는 큰 차이를 보이지 않았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.128-128
• /
• 2012

We investigated the atomic and electronic properties of graphene grown by Pd silicidation and intercalation using LEED, STM, and ARPES. Pd was deposited on the 6H-SiC(0001) surface at RT. The formation of Pd silicide gives rise to breaking of Si-C bonds of the SiC crystal, which enables to release C atoms at low temperature. The C atoms are transformed into graphene from $860^{\circ}C$ according to the LEED patterns as a function of annealing temperature. Even though the graphene spots were observed in the LEED pattern and the Fourier transformed STM images after annealing at $870^{\circ}C$, the topography images showed various superstructures so that graphene is covered with Pd silicide residue. After annealing at $950^{\circ}C$, monolayer graphene was revealed at the surface. The growth of graphene is not limited by surface obstacles such as steps and defects. In addition, we observed that six protrusions consisting of the honeycomb network of graphene has same intensity meaning non-broken AB-symmetry of graphene. The ARPES results in the vicinity of K point showed the non-doped linear ${\pi}$ band structure indicating monolayer graphene decoupled from the SiC substrate electronically. Note that the charge neutrality of graphene grown by Pd silicidation and intercalation was sustained regardless of annealing temperature in contrast with quasi-free- standing graphene induced by H and Au intercalation. Further annealing above $1,000^{\circ}C$ accelerates sublimation of the Pd silicide layer underneath graphene. This results in appearance of the $(6r3x6r3)R30^{\circ}$ structure and dissolution of the ${\pi}$ bands for quasi-free-standing graphene.

• 자원리싸이클링
• /
• 제23권1호
• /
• pp.33-39
• /
• 2014

본 연구에서는 폐 PCB의 주성분인 Cu와 $CaO-SiO_2-Al_2O_3-MgO$계 슬래그의 평형실험에 의해 Cu의 용해도에 대하여 조사하였다. 1673 K~1825 K 범위에서 일정한 비율로 미리 용융된 4원계 슬래그와 Cu를 흑연 도가니에 각각 20 g 장입한 후, 10시간동안 평형 을 유지하였다. 분위기 중의 산소분압은 CO가스와 Ar가스의 비율을 조절하여 $10^{-17.23}{\sim}10^{-15.83}$ atm 범위로 제어하였다. 평형산소 분압과 염기도 및 MgO 농도가 증가할수록 슬래그 중 Cu의 농도는 증가하였다. 그리고 반응 온도가 높을수록 슬래그 중의 Cu의 농도는 감소하였다. 슬래그 중으로 용해되는 Cu의 반응은 발열반응이다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.613-617
• /
• 2010

Ferro-Nickel slag is one of the by-products in Ferro-Nickel manufacturing process. The slag is composed of $SiO_2$, MgO, $Fe_2O_3$ and others. But the slag has been buried at landfill despite having valuable elements. This study tried to extract Mg ion and fabricate Mg compound from ferro-nickel slag using hydrochloric acid solution. Mg ion was extracted with Si, Fe and other ions in HCl solution. So reprocess was needed for gaining high purity Mg ion. It was thought that Si ion or $SiO_2$ precipitated in HCl solution and removed from solution in filtering process. Fe ion converted into $Fe(OH)_3$ after reacted with $NH_4OH$ and precipitated in HCl solution. After these process, the filtrate was composed of high purity Mg ion. $MgCl_2{\cdot}NH_4Cl{\cdot}6H_2O$ was obtained through drying of filtrate and this product was changed into MgO by burning process ($600^{\circ}C$-30 min). That is, 1st material or solution for manufacturing 2nd product was fabricated using acid dissolution method and other treatments.

• 한국주조공학회지
• /
• 제38권2호
• /
• pp.32-40
• /
• 2018

Changes in the microstructures and mechanical properties of an AC2B alloy through solution heat treatment were investigated using recycled AC2B cutting chips as raw material. The as-cast microstructure of the AC2B alloy comprised ${\alpha}$-Al, $Al_2Cu$, and coarse needle-shaped phases considered to be eutectic Si and an Al-Fe-Si based intermetallic compound. After solution heat treatments at $505^{\circ}C$ for 1 h and 6 h, the samples showed complete dissolution of $Al_2Cu$ and relatively fine distribution of intermetallic compounds. Hardness test results showed that the hardness rapidly increased after the solution heat treatment for 1 h by solid solution hardening, and the increase of hardness exhibited a plateau from 1 h to 6 h. The results of the hardness and tensile tests showed that there was no visible difference in the effect of 1 h and 6 h solid solution treatment.

• 방사성폐기물학회지
• /
• 제3권3호
• /
• pp.177-181
• /
• 2005

칼슘-벤토나이트와 접한 약 $20\%$의 우라늄 산화물을 함유한 유리고화체가 알곤 분위기에서 모의 화강암지하수에 의해 침출되었을 때 노란색의 우라늄화합물이 벤토나이트와 고화체의 경계면에 농축되었다. 6년간의 침출후 형성된 우라늄 화합물이 beta-uranophane $[Ca(UO_2)_2(SiO_{3}OH)_{2}5H_{2}O]$임을 XRD, 적외선 스펙트럼과 질량분석기를 이용하여 확인하였으며, 이 화합물의 용해도를 $80^{\circ}C$, 탈이온수에서 측정한 결과 약 $10^{-6}\;mole/L$ 이었다.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.671-676
• /
• 2014

It is known that bones get damaged by accidents and aging. Since the discovery of Bioglass, various kinds of ceramics have been also found to bond to living bone; some of these ceramics are already being clinically used as bone-repairing materials. In the present study, antibacterial calcium silicate gel ($Ag-30CaO{\cdot}70SiO_2$ gel) was prepared by sol-gel method in order to control the microstructure, which is related to the dissolution rate and induction period of apatite formation in body environment. In addition, biological $Ag-30CaO{\cdot}70SiO_2$ is tested. This was done to impart antimicrobial activity to the $30CaO{\cdot}70SiO_2$. Ag ion was added during sol-gel synthesis to replace the $H_2O$ added during the making of the $30CaO{\cdot}70SiO_2$ gel, which has silver solutions of various concentration. After the sol-gel process, 1N-$HNO_3$ solution was used to wash the gel when synthesizing the gel, in order to maintain the porous structure and remove PEG, water soluble polymers. Then, the apatite forming ability of the sol-gel derived CaO-$SiO_2$ gels was investigated using simulated body fluid (SBF), which had almost the same ion concentration as that of human blood plasma. The gels were analyzed by FT-IR spectroscopy, SEM observation, XRD, and fluorescent microscopy. The apatite was successfully created even after washing the gel; apatite is present in an amorphous state, and was found to affect the concentration of the Ag ion in cells in MC3T3 live & dead assay results. From these results, it is suggested that a good material that can be used to repair defects of nature bone is $Ag-30CaO{\cdot}70SiO_2$ gel.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.499-504
• /
• 2002

The microstructural change associated with the hardness profile in friction stir welded, age-hardenable 6005 Al alloy had been evaluated. Frictional heat and plastic flow during friction stir welding created the fine recrystallized grain (Stir Zone, SZ), the elongated and recovered grain (Thermo-Mechanical Affected Zone, TMAZ) in the weld zone. Heat affected zone (HAZ), which could be only identified by hardness test because there is no difference in the grain structure compared with that of the base metal, was formed beside the weld zone. A softened region had been formed near the weld zone during friction stir welding process. The softened region was characterized by the dissolution and coarsening of the strengthening precipitate during the friction stir welding. The sound joints of 6005 Al alloys were successfully formed under a wide range of the friction stir welding conditions.