• Journal of Radiation Protection and Research
• /
• v.17 no.1
• /
• pp.57-70
• /
• 1992

An excess risk of lung cancer mortality among Koreans, attributable to indoor $^{222}Rn$ daughters exposure, were quantitatively evaluated by applying a stochastic health risk projection model on the radiation exposure. The lung cancer rate in Korean males and females, based on the 1989 demographic data, were estimated to be $22.4/10^5-y\;and\;9.5/10^5-y$, respectively The lifetime baseline lung cancer risks, deduced from these rates, appeared to be 0.047 and 0.019 for males and females, respectively, and were lower than the corresponding 1984 values of 0.067 and 0.025 in the U.S.A. The excess risk coefficients, derived by modified relative risk projection model of the BEIR-IV Committee under the US National Academy of Science, per annual 1.0 WLM of exposure to indoor radon daughters were estimated to be 0.022/WLM for males, 0.009/WLM for females, and 0.017/WLM for both sexes. The resulting annual frequency of excess lung cancer mortality for the life expectancy in the Korean population appeared to be 230/10^6-WLM, which was an approximate median of $120{\sim}450/10^6-WLM$ reported so far in the world.

• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.135-146
• /
• 1983

This study is to investigate the properties of domestic fly ash for utilization as data in regard to fly ash which is by-product of domestic coal powder plants and the possibility of utilization as insulation material of domestic fly ash. Composition refractoriness size distribution density contents of hollow particles and crystalline phase were examined as the properties of domestic fly ash. As to the fired test pieces of fly ash by itself that varied contents of hollow particles with four kinds and of the fly ash-clay-saw dust system linear shrinkage bulk density app. porosity compressive strength thermal conductivity and structures were investigated for the possibility of utilization as an insulation material. The results are as follows : 1. The properties of the fly ash I) The constituent particle of the fly ash is spherical and it contains not a few hollow particles (floats by water 0.30-0.50 floats by $ZnCl_2$ aq.(SpG=1.71) 6.97-16.72%). ii) The chemical compositions of fly ash are $SiO_243.9-54.1%$ , $Al_2O_321.0-30.7%$ Ig loss is 7.4-24.1% and the principal of Ig loss is unburned carbon. iii) Fly ash was not suitable to use for mortar and concrete mixture because Ig. loss value is higher than 5% 2. Utilization as insulation material I) The test pieces of original fly ash floats by water floats by ZnCl2 aq(SpG=1.71) p, p t by ZnCl2 aq.(SpG=1.71) that were fired at 110$0^{\circ}C$ represented 0.11-0.18 kcal/mh$^{\circ}$ C as thermal conductivity value. ii) The test pieces which (76.5-85.5) wt% fly ash-(8.5, 9.5) wt% clay-(5.0-15.0) wt% saw dust system(68.0-72.0) wt% fly ash -(17.0-18.0)wt% clay-(10.0-15.0) wt% saw dust system and 59.5 wt% fly ash-25.5 wt% clay-15.0wt% saw dust system were fired at 110$0^{\circ}C$ the thermal conductivity was less than 0.1Kcal/mh$^{\circ}$ C. iii) In view of thermal conductivity and economic aspect insulation materials which added saw dust as blowing agent and clay as inorganic binder are better than that of fly ash as it is or separated hollow fly ash particles. iv) When the saw dust contents increased in the (59.5-90.0) wt% saw dust system and when amount of clay de-creased and firing temperature decreased under the condition of equal addition of saw dust app. porosity increased but bulk density compressive strength and thermal conductivity decreased.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.68-93
• /
• 1998

The physical properties of polymer are greatly influenced by the extent to which a resin cures. The presence of un reacted monomer can, have a plasticizing effect on the polymer, thereby altering the physical and mechanical properties of dentin bonding agent (DBA). If the DBA does not polymerize sufficiently, it will leave a weak bonding layer and lead to lower bond strength. The purpose of this study was to evaluate the shear bond strengths(SBS) and the degree of conversion (DC) of 4 commercialy avilable dentin bonding systems which are composed of 2 multi-bottle systems [Scotchbond Multi-Purpose (SMP), AeliteBond(AB)] and 2 onebottle systems [SingleBond(SB), One-Step(OS)]. For shear bond strength measurement, labial surfaces of freshly extracted bovine incisors were ground with # 600 grit SiC paper to expose dentin. Four different groups of samples were formed, with 10 samples. being made for each of the 4 commercial DBA in each group according to the curing sequences of DBA and overlayer thickness of composites: Group I (standard cure and 1mm thick composites) : The DBA was light cured and the composites of 1mm thickness was applied ; Group II (standard cure and 2mm thick composites) : The DBA was light cured and the composites of 2mm thickness was applied; Group III (simultaneous cure and 1mm thick composites) : The DBA was not light-cured and simultaneously cured with composites of 1mm thickness; Group N (simultaneous cure and 2mm thick composites) : The DBA was. not light-cured and simultaneously cured with composites of 2mm thickness. The SBS was measured immediately after the composites was bonded to the bovine dentin using an Instron machine. The DC of the DBA was examined in a thin film under simulated conditions of the experimental groups according to the curing sequences and overlayer thickness of composites in the SBS test. using a Fourier transform Infrared(FTIR) spectrometer. The following results were obtained from SBS tests and DC measurements 1. In SBS tests, the multi-bottle DBA(SMP, AB) had a generally higher bond strength values than the one bottle DBA(SB, OS). In DC measurements, the one bottle DBA(SB, OS) had a significantly higher DC than the multi-bottle DBA(SMP, AB). 2. In all DBAs except OS, there was no significant difference between the bond strength of group I (standard cure and 1mm thick composites) and that of group III (simultaneous cure and 1mm thick composites). SMP, SB in Group I had a significantly higher DC than those in group III, but AB, OS in group I had a significantly lower DC than those in group III 3. All DBAs in Goup II (standard cure and 2mm thick composites) had significantly higher bond strength and DC than those in Group N (simultaneous cure and 2mm thick composites). 4. In all DBAs, there was no significantly different SBS and DC between Group I and Group II, but all DBAs in Group III had significantly higher SBS and DC than those in Group IV.

• Korean Journal of Plant Resources
• /
• v.28 no.2
• /
• pp.178-192
• /
• 2015

This study was carried out to investigate the vascular plants of Neunggyeong-bong, Gangwond-do, South Korea. The vascular plants that were collected 7 times from 2008 and 2013 consisted a total of 440 taxa; 75 families, 261 genera, 383 species, 4 subspecies, 48 varieties and 5 forms. Among them, 15 taxa of Korean endemic plants and 11 taxa of rare and endangered plants were included. The floristic regional indicator plants found in this area were 11 taxa of grade IV, 22 taxa of grade III. Naturalized plants consisted of 29 taxa that made up 6.6% of the total vascular plants in this area. Medicinal plants of the Korean Pharmacopoeia and Korean Herbal Pharmacopoeia distributed in this area consisted of 60 taxa.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Radiation Oncology Journal
• /
• v.26 no.4
• /
• pp.195-203
• /
• 2008

Purpose: To investigate the treatment outcome and failure patterns after definitive chemoradiation therapy in locally advanced, unresectable esophageal cancer. Materials and Methods: From February 1994 to December 2002, 168 patients with locally advanced unresectable or medically inoperable esophageal cancer were treated by definitive chemoradiation therapy. External beam radiation therapy (EBRT) ($42{\sim}46\;Gy$) was delivered to the region encompassing the primary tumor and involved lymph nodes, while the supraclavicular fossa and celiac area were included in the treatment area as a function of disease location. The administered cone-down radiation dose to the gross tumor went up to $54{\sim}66\;Gy$, while the fraction size of the EBRT was 1.8-2.0 Gy/fraction qd or 1.2 Gy/fraction bid. An optional high dose rate (HDR) intraluminal brachytherapy (BT) boost was also administered (Ir-192, $9{\sim}12\;Gy/3{\sim}4\;fx$). Two cycles of concurrent FP chemotherapy (5-FU $1,000\;mg/m^2$/day, days $2{\sim}6$, $30{\sim}34$, cisplatin $60\;mg/m^2$/day, days 1, 29) were delivered during radiotherapy with the addition of two more cycles. Results: One hundred sixty patients were analyzable for this review [median follow-up time: 10 months (range $1{\sim}149$ months)). The number of patients within AJCC stages I, II, III, and IV was 5 (3.1%), 38 (23.8%), 68 (42.5%), and 49 (30.6%), respectively. A HDR intraluminal BT was performed in 26 patients. The 160 patients had a median EBRT radiation dose of 59.4 Gy (range $44.4{\sim}66$) and a total radiation dose, including BT, of 60 Gy (range $44.4{\sim}72$), while 144 patients received a dose higher than 40 Gy. Despite the treatment, the disease recurrence rate was 101/160 (63.1%). Of these, the patterns of recurrence were local in 20 patients (12.5%), persistent disease and local progression in 61 (38.1%), distant metastasis in 15 (9.4%), and concomitant local and distant failure in 5 (3.1%). The overall survival rate was 31.8% at 2 years and 14.2% at 5 years (median 11.1 months). Disease-free survival was 29.0% at 2 years and 22.7% at 5 years (median 10.4 months). The response to treatment and N-stage were significant factors affecting overall survival. In addition, total radiation dose (${\geq}50\;Gy$ vs. < 50 Gy), BT and fractionation scheme (qd. vs. bid.) were not significant factors for overall survival and disease-free survival. Conclusion: Survival outcome after definitive chemoradiation therapy in unresectable esophageal cancer was comparable to those of other series. The main failure pattern was local recurrence. Survival rate did not improve with increased radiation dose over 50 Gy or the use of brachytherapy or hyperfractionation.

• Journal of Yeungnam Medical Science
• /
• v.22 no.1
• /
• pp.72-80
• /
• 2005

Background: Nasopharyngeal cancer is a rare disease with a relatively poor prognosis because it tends to be diagnosed at an advanced stage. The aim of this study was to establish the clinical characteristics of nasopharyngeal cancer. Materials and Methods: The medical records of 54 patients with nasopharyngeal cancer from January 1993 to December 2002 were reviewed retrospectively. Forty one cases were male (75.9%) and thirteen were female (24.1%). The average age was of 46.9 (range 16 to 78 years) years. The majority of patients (79.6%) were diagnosed in the advanced stage. The most common complaints were a neck mass (55.5%) and the WHO type III (53.7%) was the most frequent histological type. Results: The cumulative survival rate for a 5-year period was 46.5% and the T stage, N stage, pathologic type, and clinical stage were not significantly related to the survival rate. Sixteen of 54 (31.5%) cases presented with a distant metastasis of the bone, lung, brain, spine, and liver, and six cases (11.1%) presented with a locoregional recurrence. Conclusion: TNM staging is not appropriate for predicting survival rate of nasopharyngeal carcinoma patients. Therefore, a newer staging system, which includes new factors, is needed to predict the prognosis.

• Korean Journal of Plant Resources
• /
• v.33 no.5
• /
• pp.516-535
• /
• 2020

This study was conducted to provide information on local resource plants by identifying aquatic and Riparian flora. We investigated the aquatic and riparian floras in 3 streams(Byeongseong-cheon, Buk-cheon, Oeseo-cheon) from February to October 2019. 321 taxa (i.e. 300 species, 5 subspecies, 15 varieties 1 Cultivars from 203 genera of 78 families) of the vascular plants were found in the survey area. Byeongseong-cheon is 133 taxa, Buk-cheon is 233 taxa and Oeseo-cheon is 132 taxa. Among 321 taxa, we found 5 endemic species, 3 red list plants, and However, endangered plants were not found in 3 streams. Aquatic and Riparian plant 138 taxa(i.e. Aquatic plant 20 taxa, Riparian plant 118 taxa). Life forms is annual plant 43 taxa, biennial plant 24 taxa, perennial plant 71 taxa. Aquatic plant growth forms emergent hydrophyte 13 taxa, floating leaved hydrophyte 1 taxa, submerged hydrophyte 6 taxa. The number of floristic regional indicator plants was 15 (i.e. 1 species of IV degree, 3 taxa of III degree, 5 taxa of II degree, and 6 taxa of I degree). Approved foreign export plants 31 taxa. In addition, 52 naturalized plants were identified, and the percentage of Naturalized Index (NI) and Urbanization Index (UI) were 16.1%, and 16.2%, respectively. Vascular plant usability and reclassification result is Edible 213 species (66%), Medicinal 244 species (76%), Flavor 10 species (3%), Industrial 136 species (42%), Ornamental 137 species (36%), Restoration 117 species (36%), Compost 155 species (48%), Unknown 7 species (5%). We hope that our results provide reference data to set up strategy of resources plants, conservation of biodiversity in the 3 streams and Sangju-si areas.

• Journal of Gastric Cancer
• /
• v.7 no.4
• /
• pp.228-236
• /
• 2007

Purpose: We have evaluated changes of body composition for patients that underwent a radical gastrectomy for stomach cancer by the use of available bioelectrical impedance analysis during the first year following surgery. We plan to utilize these findings in nutritional and physiological studies. Materials and Methods: We evaluated clinical changes in body composition in patients using the bioelectrical impedance method (Inbody 4.0, Biospace, Korea), between November 2003 to November 2004. A total of 98 patients agreed to enroll in this study among all of the patients that underwent a radical gastrectomy. Results: The average weight decreased by 6.7%, and 9.4%, within the first and 6 months after surgery, respectively (P<0.01). The fat free mass (FFM) dropped by 4.9% within the first month and there were no more changes after this period (P<0.01). The fat mass (FM) and visceral fat area (VFA) decreased 24.3% and 14.1% within the first 6 months (P<0.01), respectively. The reduction effects for female patients were greater than for male patients for weight, FFM and VFA (P<0.05). The edema index was higher in patients with stage III-IV disease than in patients with stage I-II disease (P<0.05). There were significant differences for Billroth I and Billrothl II patients as compared to patients that underwent an esophagojejunostomy for a reduction of the FM, as measured in the in the 12th month after surgery (27.6%, 22.1%, and 41.2%, respectively; P<0.05). Conclusion: Since nutritional supplementation and an improvement in body weight loss after a radical gastrectomy is significantly related with quality of life, nutritional and physiological studies should be greatly considered. In this study, bioelectrical impedance analysis was very useful in analyzing the diminution of body composition and we hope this study on the nutritional and physiological aspects related to a radical gastrectomy will be useful for later studies.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.263-270
• /
• 2010

This is a research on development of water purification equipment called artificial floating island (=AFI) for the stagnant water area which can secure exuberant landscape and water-friendility. The equipment devised in this study is designed to make up the weakness of conventional AFIs and improves the removal efficiency of pollutants using the mixture of media and plants. The air compressor positioned at the inlet releases air with inflow continuously, the water pump at the outlet sprays as a form of fountain with causing a disturbance on stable water column, then, both of them contribute improvement of water quality over a large area. We applied Bio-stone as a media in this system and performed an experiment of pre-efficiency test, and we concluded that the higher pollutants concentration of inflow, the higher removal efficiency we obtained. At the result of lab-scale experiment, in the case of high-concentration inflow, in the removal efficiency of SS is 62.2%, BOD is 50.2%, COD is 55.1%, T-N is 31.6%, T-P is 38.4%. In addition, to evaluate the field application, we set up the facilities in Sin-gal lake located in Yongin-Si Gyeonggi-Do, and researched on the removal efficiency of outflow relative to the inflow. As a result, SS is 53.5%, BOD is 32.8%, COD is 36.9%, T-N is 22.6%, T-N is 33.2%.