• 한국자기학회지
• /
• 제12권5호
• /
• pp.184-188
• /
• 2002

수직자기이방성을 가지는 Cu/Ni/Cu(002)/Si(100) 자성박막을 전자빔 증발법을 이용하여 초고진공에서 증착 하였다. 증착 시 RHEED로 측정 한 결과 실리콘 기판 위에 자성박막이 적층성장되었음을 확인하였다. 이러한 Cu/Ni/Cu(001)/Si(100) 자성박막에 1 MeV C 이온을 이온선량 2$\times$$10^{16}$ ions/$\textrm{cm}^2$로 조사한 후 MOKE로 자기이력곡선을 측정한 결과 이온 조사에 의해 자화용이축이 수직에서 수평방향으로 변화되었음을 확인하였다 포항 방사광가속기를 이용하여 X-선 반사도와 Grazing Incident X-ray diffraction(GE) 분석을 수행한 결과 첫 번째 Cu층과 Ni층 사이의 계면은 이온 조사 후 거칠기는 증가하였으나, Cu와 Ni의 전자밀도의 대비는 더욱 명확해졌다. 그리고, 증착 후 Cu와 Ni원자의 격자 상수 차이에 의해 Ni층이 가지고 있었던 strain은 이온 조사 후 완화되었음을 알 수 있었다. 끝으로, 이온조사 시 자성특성 변화와 직접적인 관계가 있는 strain 완화, 계면 혼합층(혹은 새로운 상)등이 생성되는 기구를 탄성충돌 및 비탄성충돌에 의한 열화학적 구동력으로 규명하였다.

• 근관절건강학회지
• /
• 제23권1호
• /
• pp.49-60
• /
• 2016

Purpose: The purpose of this study was to examine the effects of hypertension health school program performed in a public health center located in Y-si. Most interesting were the effects on hypertension-related knowledge, self-efficacy, self-care behavior and physiological parameters for hypertensive patients. Methods: Nonequivalent control group pretest-posttest design was employed. 45 patients with hypertension living in Y-si were assigned into an experimental group (n=23) or a control group (n=22). Experimental group was provided with the 8-weeks hypertension health school program from April 7 to May 20 in 2014. Data were analyzed with SPSS/WIN 21.0 using descriptive statistics, $x^2$-test, Fisher's exact test and t-test. Results: The result indicated a significant difference between the experimental group and control group in the scores of hypertension-related knowledge (t=-10.97, p<.001), self-efficacy (t=-4.56, p<.001), self-care behavior (t=-407, p<.001), physiological parameters including systolic blood pressure (t=2.18, p=.032) and diastolic blood pressure (t=2.74, p=.008) and cholesterol levels (t=5.04, p<.001). Conclusion: The conclusion of this study is that the hypertension self-help group program has a significant effect on the change of hypertension-related knowledge, self-efficacy and self-care behavior for hypertensive patients.

• 한국축산식품학회지
• /
• 제42권1호
• /
• pp.128-141
• /
• 2022

Compared to the conventional farms (CF) rearing of broilers, the rearing management of animal welfare-certified farms (AF) must provide low stocking density, perch, air regulation, and feeding plant-based protein. This study aimed to compare the effects of rearing management in CF and AF on blood parameters, meat quality, and bioactive compound content in Ross 308 broiler chickens at the farm level before transportation to slaughterhouses. Blood and meat samples were obtained at 28-35-dayold chickens from three CF and three AF. In blood samples, low-density lipoprotein cholesterol (p<0.05), triglyceride (p<0.001), glucose (p<0.01), total protein (p<0.001), albumin (p<0.01), and white blood cell (p<0.001) levels as well as the heterophil/ lymphocyte ratio [stress index (SI), p<0.001] were lower in broilers from AF than in CF. In meat samples, shear force (p<0.001, p<0.05), and carnosine contents (p<0.001, p<0.05) in both breast and thigh meat from AF were higher than those in meat from CF. The contents of linoleic acid (p<0.001), α-linolenic acid (p<0.001), and eicosapentaenoic acid (p<0.05) were higher in the samples from AF than those from CF. This study reveals that such differences are influenced by the different rearing factors in nutrition, housing, and management practices between CF and AF. Supplementation of plant-based protein and enough space to move due to lower stocking density accounts for the large differences between them. These results can be used as preliminary data showing that the AF system reduces the SI and enhances carnosine and polyunsaturated fatty acids levels in chicken meat at the farm level before transportation.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.1-5
• /
• 2015

SI thermochemical hydrogen production process achieves water splitting into hydrogen and oxygen through three chemical reactions. The process is comprised of three sections and one of them is HI decomposition into $H_2$ and $I_2$ called as Section III. The production of $H_2$ included processes involving EED for concentrating a product stream from Section I. Additionally an $I_2$ crystallization would be considered to reduce burden on EED by removing certain amount of $I_2$ out of a process stream prior to EED. In this study, the current thermodynamic model of SI process was briefly described and the calculation results of the applied Electrolytes NRTL model for phase equilibrium calculations was illustrated for ternary systems of Section III. We calculated temperature and heat duty of an $I_2$ crystallizer and heat duty of heaters using UVa model and heat balance equation of simulation tool. The results were expected to be used as operation information in optimizing HI decomposition process and setting up material balance throughout SI process.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.1-5
• /
• 2008

ZnS-$SiO_2$ composite is normally used for sputtering target. In recent years, high sputtering power for higher deposition rate often causes crack formation of the target. Therefore the target material is required that the sintered target material should have high crack resistance, excellent strength and a homogeneous microstructure with high sintered density. In this study, raw ZnS and ZnS-$SiO_2$ powders prepared by a 3-D mixer or high energy ball-milling were successfully densified by spark plasma sintering, the effective densification method of hard-to-sinter materials in a short time. After sintering, the fracture toughness was measured by the indentation fracture (IF) method. Due to the effect of crack deflection by the residual stress occurred by the second phase of fine $SiO_2$, the hardness and fracture toughness reached to 3.031 GPa and $1.014MPa{\cdot}m^{1/2}$, respectively.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.373-379
• /
• 1997

A study on the deposition and characterization of BaTiO3 thin films on MgO-buffered Si(100) substrates by sputtering was conducted. The MgO buffer layers were investigated as a function of deposition temperature. At lower substrate temperature, the MgO layers were not fully crystalline, but a crystallized MgO layer with (001) preferred orientation was obtained at the substrate temperature of $700^{\circ}C$. Partially (00ι) or (h00) textured BaTiO3 films were obtained on Si(100) with the MgO buffer layer grown at 700ι. While, randomly oriented BaTiO3 films with large-scale cracks on the surface were made without the MgO layer. The crystallographic orientation, morphology and electrical properties between the BaTiO3 films on Si with and without the MgO layer were compared using the BaTiO3 film on MgO(100) single crystal substrate as a reference system. Also the favorable role of the MgO layer as a buffer for growing of oriented BaTiO3 films on Si substrates was confirmed.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.899-906
• /
• 2018

The irradiation performance of $U_3Si$ dispersion fuel in an Al matrix, $U_3Si-Al$, under the Hi-Flux Advanced Neutron Application Reactor (HANARO) design full-power condition of 30 MW was tested for full-power qualification of the fuel. A test assembly was fabricated containing 18 fuel rods made with atomized $U_3Si$ powder manufactured at the Korea Atomic Energy Research Institute. The test assembly was irradiated for 188 full-power operation days in the HANARO subject to the normal fuel-loading scheme and achieved about 60 at% U-235 average burnup and 75 at% U-235 peak burnup. The maximum linear power of the test assembly was 98 kW/m. Nondestructive and destructive postirradiation examinations were conducted. The measured postirradiation examination data were compared with data from previous irradiations and the design criteria required for HANARO fuel. Consequently, it was concluded that in-pile performance was acceptable and fuel integrity was maintained, and the behavior satisfied the fuel design requirements.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.22-26
• /
• 2013

PTCR ceramics of $(Ba_{0.998}Sm_{0.002})TiO_3+0.001MnCO_3+xSiO_2$ (x=1, 2, 3, 4, 5, 6 mol%) were fabricated by solid state method. Disk samples of diameter 5 mm and thickness about 1mm were sintered at $1,290^{\circ}C$ for 2 h in reduced atmosphere of $5%H_2-95%N_2$ followed by re-oxidation at $600^{\circ}C$ for 30 min. in $20%O_2-80%N_2$.and their microstructures and electrical properties were investigated with SEM and Multimeter. The color of sintered samples was strongly dependent on $SiO_2$ content showing that the color of samples with $SiO_2$ of 1~2 mol% was gray but that of samples with $SiO_2$ of 4~6 mol% was changed from gray to blue, which seems to be related with the reduction of samples due to the oxygen vacancies created during the sintering in reduced atmosphere. $SiO_2$ content had a great influence on the microstructure and the electrical properties. With increasing $SiO_2$ content, the grain size of samples increased and the resistivity as well as the resistivity jump ($R_{285}/R_{min}$) decreased, which is considered to be attributed to the resistivity change at grain interior and grain boundary due to the fast mass transfer through $SiO_2$ liquide phase during the sintering. Samples with 2 mol% $SiO_2$ has the resistivity of $202{\Omega}cm$ and the resistivity jump of 3.28. It is expected that $SiO_2$ doped $BaTiO_3$ based PTC ceramics can be used for multilayered PTC thermistor due to the resistance to the sintering in reduced atmosphere.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2017

Fe-9.8Si-6.0Al mother alloy was manufactured using by Fe-3.5Si recycled scrap and Si powder. And then, soft magnetic alloy powder of $D_{50}$ size and sphere type were prepared by gas atomization process. To obtain the soft magnetic powder of a high aspect ratio, in the first, we conducted the ball milling process for 8 hours. And heat treatment was performed under $650^{\circ}C$, 2 hours and $N_2$ atmosphere condition for reducing the residual stress of the powder. Based on these process, we made around $50{\mu}m$ diameter Fe-9.8Si-6.0Al powder, which morphology and shape was a similar to the commercial Fe-Si-Al powder. Finally, the soft magnetic sheets were prepared by tape casting process using by those powders. The permeability of the tape casting sheet was measured, and we confirmed the possibility of reusing to the soft magnetic materials of Fe-Si electric sheet scrap.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1995년도 춘계학술대회
• /
• pp.67-67
• /
• 1995

Acyl-CoA:cholesterol acyltransferase (ACAT, EC 2.3.1.26) plays an important role in the control of intracellular free cholesterol content via its cholesterol esterifying activity. ACAT inhibitors are expected to be effective for treatment of atherosclerosis and hypercholesterolemia. In the course of a screening program for ACAT inhibitors from microbial sources, GERI-BP001 M, A, and B were isolated from the fermentation broth of a fungal strain. GERI-BP001 compounds were isolated from a culture broth of Aspergillus fumigatus F37 by acetone extraction, EtOAc extraction, SiO$_2$ column chromatography, and reverse phase HPLC. The structure of GERI-BP001 coumpounds were determined by $^1$H-NMR, $\^$l3/C-NMR, 2D-NMR, NOESY, and long range C-H COSY experiments. GERI-BP001 M, A, and B inhibit ACAT activity in an enzyme assay system using rat liver microsomes by 50% at concentrations of 75, 147, and 71 ${\mu}$M, respectively.