• 한국세라믹학회지
• /
• 제30권2호
• /
• pp.85-92
• /
• 1993

Oxynitride glasses in Na-Ca-Si-O-N system were prepared by melting at 135$0^{\circ}C$ for 2 hours in N2 gas. The effects of Si/Na mole ratio and the various Si3N4 contents were investigated. Stable oxynitride glasses can be obtained up to 9wt.% Si3N4 content in case the Si/Na mole ratio was 2.12 and 1.62, but $\beta$-Si3N4 was precipitated at 9wt.% Si3N4 content in case the Si/Na mole rtio was 1.12. Density (p), chemical durability, hardness (Hv), and fracture toughness (KIC) increased with increasing Si3N4 content. In cae the Si/Na mole ratio was 1.12, the increment of properties was remarkable but hardness and fracture toughness did not increase no longer owing to precipitation of $\beta$-Si3N4.

• 한국재료학회지
• /
• 제3권4호
• /
• pp.381-387
• /
• 1993

${Si_3}{N_4}$와 BN의 선택적 산화반응과 질소분위기 소결에 의하여 $Si_2N_2O$로 결합된$Si_3N_4-BN$복합재료를 개발하였으며, 이때 산화반응 온도와 CaO의 첨가가 $Si_2N_2O$의 생성에 미치는 영향을 고찰하였다. $Si_2N_2O$상이 도입된 $Si_3N_4-BN$복합재료는 내열충격성 및 용강에 대한 내침식성이 우수하여 연속제강새안의 부품인 break ring등의 소재로 사용될 수 있다.

• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.44-47
• /
• 2012

The $TiO_2/Si_3N_4/Ag/Si_3N_4/TiO_2$ multi layered structure was designed for the possible application of transparent electrodes in PDP (Plasma Display Panel). Multi layered film was deposited on a glass substrate at room temperature by DC/RF magnetron sputtering system and EMP (Essential Macleod Program) was adopted to optimize the optical characteristics of film. During the deposition process, the Ag layer in $TiO_2/Ag/TiO_2$ became heavily oxidized and the filter characteristic was degraded easily. In thus study, Si3N4 layer was used as a diffusion buffer layer between $TiO_2$ and Ag. in order to prevent the oxidation of Ag layer in $TiO_2/Si_3N_4/Ag/Si_3N_4/TiO_2$ structure. It was confirmed that $Si_3N_4$ layer is one of candidate materials acting as diffusin barrier between $TiO_2/Ag/TiO_2$.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1021-1029
• /
• 1994

SiC ultrafine particles of 1, 10, 20 and 30 vol% were dispersed in $\alpha$-Si3N4 matrix and hot-pressed under the condition of 30 MPa at 1800 and 190$0^{\circ}C$ respectively. Physical, mechanical properties and microstructures of sintered Si3N4-SiC nanocomposites were investigated. Flexural strength and density of Si3N4-10 vol% SiC nanocomposites hot-pressed at 190$0^{\circ}C$ represented the 1002 MPa and 97.9%T.D respectively, and it was confirmed as a remarkable improvement of 67% compared to Si3N4 monolith. Fracture toughness was shown as 7.2 MPa.m1/2 when the same composition was hot pressed at 180$0^{\circ}C$. This effect was supposed to be due to the improvement of microstructure by the adequate suppression of the excessive growth of Si3N4 grain with SiC nano-particles.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.956-956
• /
• 1990

석탄회의 탄소가 첨가된 질화반응시에 생성된 AIN, SiC 그리고 Si3N4 등의 생성물 분포를 반응온도, 시간 그리고 탄소의 첨가량에 따라 검토하였다. AIN의 조성은 시료입자가 작을수록 증가하였으며 반응온도 14500~1500℃와 약 2시간의 반응시간 그리고 약 30%의 탄소 첨가량 (시료무게 기준) 에서 최대값을 나타내었다. SiC와 Si3N4 조성변화는 서로 상반된 경향을 보였으며 반응온도가 낮고 반응시간이 작으며 그리고 탄소첨가량이 증가할 수록 SiC의 조성은 Si3N4 에 비하여 크게 나타났다.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.67-73
• /
• 1986

SiC and $SiC-Si_3N_4$ powder were synthesized via the carbiding and carbiding-nitriding reaction of Jecheon quartz respectively using graphite as a reducing agent. $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ composite was obtained by the carbiding-nitriding reaction of Jecheon quartz-graphite mixture at 1, 35$0^{\circ}C$ in $H_2$ atmosphere. $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ composite was obtained by the carbidint-nitriding reaction of Jecheon quartz-graphite mixture at 1, 35$0^{\circ}C$ in $N_2-H_2$ atmosphere. The ratio of $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ content in a produced composite could be controlled by adjusting the reaction time and gaseous mixture.

• 한국재료학회지
• /
• 제8권1호
• /
• pp.27-32
• /
• 1998

In-Sit반응소결에의해 Si과 AI금속분말을 이용하여 Si$_{3}$N$_{4}$-AIN 복합세라믹스를 합성하였다. 합성된 Si$_{3}$N$_{4}$-AIN복합세라믹스의 미세조직과 결정구조를 해석하기 위해, OM, TEM, XRD및 EDX를 이용하였으며, Si$_{3}$N$_{4}$-AIN -20wt.%AIN복합세라믹스에서 Si의 질화율은 97%로 가장 높았다. Si$_{3}$N$_{4}$-AIN 복합세라믹스에서 Si의 질화율은 AI첨가량 증가에 따라 감소하였다. 대부분의 AI입자들은 다결정 AI입자들은 다결정 AIN(4-H구조)로 완전질화되었으며, 따라서 잔류 AI상은 반응소결체내에서 관찰되지 않았다. Si$_{3}$N$_{4}$의 결정구조는 $\alpha$와 $\beta$구조가 혼재된 상태이며, 잔류 Si입자내에서는 미소균열 및 전위가 관찰되었다. AI/Si$_{3}$N$_{4}$와 Si$_{3}$N$_{4}$ 두계면에서 이들은 거친 형상을 보이지만, 계면반응상은 관찰되지 않았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.898-901
• /
• 2000

It is known that Si3N4 ceramic insert has less hardness than Al2O3 ceramic insert. But Si3N4 ceramic insert has not only high toughness and strength but also low thermal expansion coefficient, which makes it has longer tool life under thermal stress condition. In this study, commercial Si3N4 ceramic insert and home-made SiC-Si3N4 ceramic insert which has different sintering time and chemical composition is tested under various cutting conditions. The experimental result is compared in terms of tool life and cutting force. Generally, As the cutting speed and the feed rate increased, the cutting force and the flank wear increased too. The performance of SiC-Si3N4 ceramic insert shows the possibility to be a new ceramic tool.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.386-391
• /
• 2000

It is known that Si$_3$N$_4$ceramic insert has less hardness than A1$_2$O$_3$ceramic insert. But Si$_3$N$_4$ceramic insert has not only high toughness and strength but also low thermal expansion coefficient, which makes it has longer tool life under thermal stress condition. In this study, commercial Si$_3$N$_4$ ceramic insert and home-made SiC-Si$_3$N$_4$ceramic insert which has different sintering time and chemical composition is tested under various cutting conditions. The experimental result is compared in terms of tool life and cutting force. Generally, As the cutting speed and the feed rate increased, the cutting force and the flank wear increased too. The performance of SiC-Si$_3$N$_4$ceramic insert shows the possibility to be a new ceramic tool.

• 연구논문집
• /
• 통권23호
• /
• pp.165-171
• /
• 1993

$Si_3N_4/Sic$. nano-composites were fabricated by hot-pressing, gas pressure sintering. The composites contained up to 50 wt. % of SiC. The mechanical properties such as strength, toughness, and hardness of the composite are compared each other. The flexural strength of the composites was improved significantly by introducing fine SiC particles into $Si_3N_4$ matrix, while the fracture toughness was not improved. The increase in flexural strength is attributed to the formation of uniformly elongated $\beta -Si_3N_4$ grains as well as the reduction of grain size.