• 펄프종이기술
• /
• 제34권5호
• /
• pp.1-17
• /
• 2002

The immobilization and consolidation of the model coatings based on the plastic pigment and latex binder of known particle sizes were theoretically Studied in terms of the dense random packing of binary spheres and varying extent of latex film shrinkage. The porosity of the model coatings was calculated based on three proposed latex shrinkage models: Maximum, Minimum, and Linearly Decreasing Latex Shrinkage. The increasing extent of latex shrinkage was calculated up to the critical pigment volume concentration(CPVC) as a function of plastic pigment volume fractions, and the maximum latex shrinkage was estimated from the CPVC. Also, the number of pores and the average equivalent spherical pore diameters were calculated based on those proposed models. The opacity and gloss of the model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. As expected, various coating structure-property-composition relationships, such as opacity, gloss, porosity, etc., were shown to exhibit sharp transitions near the CPVC. The CPVC values determined by the opacity, gloss, and porosity vs. PVC relationships, respectively, agreed very well with each other. Especially, the CPVC's determined by the opacity and porosity vs. PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the intermediate value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. The ink gloss of the uncalendered model coatings applied onto commercial sheet offset coated papers was shown to be affected by both the coating gloss and porosity: the higher the coating gloss, the higher the ink gloss, but the higher the coating porosity, the lower the ink gloss. Their printability was also studied in terms of the number of passes-to-fail and the rate of ink setting as a function of both plastic pigment volume fractions and plastic pigment particle sizes. A minimum crack-free temperature(MCR) of latex-bound coatings was proposed to better predict the behaviors of latexes as coating binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.43-48
• /
• 2009

This paper surveys the mechanical properties of nylon high tenacity coarse yarn and fabric for military and technical textiles. For this purpose, 6 kinds of yarns and 2 kinds of fabrics are prepared. The yarn physical properties such as yarn count, thermal shrinkages, and tensile properties are measured and discussed with the characteristics of the domestic and imported yarns. And, the physical and mechanical properties of these fabrics are also measured and discussed with the usage of these fabrics in the military and technical textiles fields. Hereafter, the differences of physical properties between domestic and foreign yarn specimens for high functional military and technical fabrics are estimated through this study.

• 한국가구학회지
• /
• 제18권4호
• /
• pp.275-281
• /
• 2007

This study was carried out to know bending process property of bentwood by treatment methods such as microwave and ammonia solution treatment. Bentwood processing was operated on bending-jig form with 60mm and 100mm radius of curvature (ROC). The species was used to Korean red pine (Pinus densiflora). No significant difference was shown in bentwood processing method on ROC. In treatment method, ammonia solution treatment for bentwood was better in dimensional stability and working ability than that of microwave treatment. However, bentwood stress was reduced with ammonia solution treatment. Color of bentwood surface appearance has a dark tendency in ammonia solution treatment. But it seems to beautiful effect of apparent annual ring is rising esthetically by ammonia solution treatment. To utilize wood as a exterior material for living amenity, it has to be closely examined from various angles including surface property, degree of swelling and shrinkage, drying state, retaining strength, durability, safety, and insect damage.

• Communications for Statistical Applications and Methods
• /
• 제27권4호
• /
• pp.445-458
• /
• 2020

The least absolute shrinkage and selection operator (LASSO) is a popular method for a high-dimensional regression model. LASSO has high prediction accuracy; however, it also selects many irrelevant variables. In this paper, we consider the moderately clipped LASSO (MCL) for the high-dimensional generalized linear model which is a hybrid method of the LASSO and minimax concave penalty (MCP). The MCL preserves advantages of the LASSO and MCP since it shows high prediction accuracy and successfully selects relevant variables. We prove that the MCL achieves the oracle property under some regularity conditions, even when the number of parameters is larger than the sample size. An efficient algorithm is also provided. Various numerical studies confirm that the MCL can be a better alternative to other competitors.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.189-192
• /
• 2012

Manufacturing process for silicate glass phosphors containing Eu2+ activator and their photoluminescence property have been studied. We adopted powder sintering process instead of traditional glass melting process for making glass phosphor. At first, phosphor powders were synthesized at 1200 ℃ for 2-3 hours under a reducing atmosphere with 10% H2-90% N2 gas mixture. The reduced powders were compacted into discs and then the discs weresintered at 1400 ~ 1500 ℃ for 1 hr under a reducing atmosphere of 5H2-95% N2. The enhancement of PL intensity by Al2O3 addition, XPS binding energy shift of Si 2p and O 1s, sintering shrinkage, and crystallization were characterized.

• 감성과학
• /
• 제10권2호
• /
• pp.169-175
• /
• 2007

본 연구에서는 국내 7개회사와 중국과 대만의 각각 2개회사에서 만든 PET POY 사(絲)의 섬도, 인장역학특성 그리고 열 수축특성 등의 물성편차에 대해 연구하였다. 이를 위해 준비된 시료로서는 239d/96f 중국사와 255d/48f의 국내사를 시료로 사용하였으며 120d 굵기의 중국사와 대만사 두 가지를 국내 6개 기업에서 만들어진 사(絲)와 또한 각각 비교하였다. 그리고 섬도, 인장역학특성 그리고 습열과 건열 수축률 등과 같은 물성 실험은 원사 케이크 내의 사(絲), 50,000m를 1개 층으로 각각 나누어 각각의 층별로 측정하였으며 이들 원사 케이크 내외층의 물성의 편차를 국내 외 원사별로 측정 분석하였다. 이들 결과들은 국내 중소 제직, 사가공 기업에게 고부가가치 고감성 소재를 개발하는데 필요한 기초물성 데이터를 제공해주는 데 큰 의의를 가진다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.103-107
• /
• 2008

This study was to execute the experiment for analyzing the quality characteristics of mortar by type of recycled sand by using the recycled sand produced by the manufacturing system by wet gravity separation in order to develop the removal device of impurities for the production of high-quality recycled sand. As a result, this study has sown that the mortar using the high-quality recycled sand through the manufacturing system by wet gravity separation in the fluidity property, strength property, and shrinkage property largely, compared with the mortar using low-quality recycled sand that not passed the device of sand flux. There was a tendency similar to the plane mortar. In conclusion, it was considered as various quality performances of the recycled sand were improved through the production stage of prototype.

• 방사선산업학회지
• /
• 제4권3호
• /
• pp.271-276
• /
• 2010

Epoxy resin has wide application in various industrial fields because of their good mechanical strength, superiority adhesion and low shrinkage etc. And the typical curing method for epoxy resins is thermal and press compaction. However, a curing method was used electron beam process in this study. Epoxy acrylate was fabricated from mixture of epoxy, acrylic acid, tetraphenylporphyrin (TPP) and hydroquinone monomethyl ether (MEHQ) with mole ratios. Then electron beam irradiation effect on the curing of the epoxy acrylate resin was investigated various absorption dose in nitrogen atmospheres at room temperature. The dynamic mechanical and thermal properties of the irradiated epoxy acrylate resins were characterized using dynamic mechanical analysis (DMA) and thermogravimetric analyzer (TGA). And the tensile and flexural strength were measured by an universal tensile machine (UTM).

• 접착 및 계면
• /
• 제16권4호
• /
• pp.137-145
• /
• 2015

본 연구에서는 현재 문화재 보존 처리에 사용되고 있는 합성수지를 대체하여 금속, 목재, 도자기, 토기, 석재 유물 등 재질별 문화재 복원 작업에 활용할 수 있는 다목적용 접합, 복원재료인 에폭시 퍼티(epoxy putty)를 개발하고자 하였다. 기존에 사용되고 있는 합성수지는 높은 강도로 인한 절삭력의 문제, 긴 경화 시간으로 인한 처짐 현상, 도구나 장갑에 묻어 유물의 표면을 오염시키는 현상, 재료의 황변 현상으로 인한 재처리 등의 문제점을 보이고 있다. 이를 해결하기 위해, 1차적으로 문화재 보존 처리 현장에서 가장 많이 사용되고 있는 페이스트(paste)형태의 복원 재료를 선정하여 물성을 파악한 후 이를 비교 대상으로 선택하고, 주제 및 경화제와 충전제의 종류에 따른 에폭시 퍼티를 개발하였다. 개발된 에폭시 퍼티는 기존 재료의 문제점 해결 및 유사한 물성을 지니기 위해 성상(性狀)이 다른 주제와 경화제를 각각 선정하여 물성 실험을 실시하였다. 연구 결과 2종 모두 페이스트 형태로 경화 시간은 5~10 min 내외로 기존 재료에 비해 약 3~10배 정도 짧아 작업의 편리성과 처짐 현상을 개선하였으며, 절삭력을 높이기 위한 마모율은 약 3배 정도 향상시켜 쉽게 성형할 수 있도록 하였다. 또한 작업 중 발생하는 표면 오염 등의 단점을 보완하기 위해 충전제로 탈크(talc)와 백색의 micro-balloon을 첨가하여 사용 중 손에 묻어 나와 끈적거리는 현상을 줄여주었을 뿐만 아니라 컬러링(coloring), 경량성, 절삭력 등이 높은 저수축, 저황변, 절삭력이 우수한 다목적 복원 재료를 개발하였다.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.103-111
• /
• 2004

The shrinkproof-finished wool fibers treated with resin coating and chlorination methods were used to find out an optimal shrinkproof finishing method keeping the quality properties of wool fabric to manufacturers. Shrinkage during repeated washing, electrostatic propensity, thermal resistance and pilling propensity of shrinkproof-finished wool knits, and analysis of finishing methods were measured. Upon the results from the surface examination of shrinkproof-finished wool fibers, the patterns of scale layer and degree of scale removal were subject to change according to the finishing processes. The shrink resistance was significantly enhanced on repeated washing of shrinkproof-finished knits, especially, chlorinated wool. Addition of strong physical force and alkali detergent applied in this washing experiment brought about superior effects with the low shrinkage rate although it was very severe washing conditions for wool fabrics. The results from the washing experiment implies that shrinkproof-finished knitted fabrics can be machine washed at individual households with other ordinary laundry. There was some changes and variation found in thermal resistance, electrostatic propensity, and pilling, however, it seems to be minor within standard limits. Therefore, shrinkproof-finished knitted fabrics did not bring serious changes to other physical properties comparing with original wool, which helps consumers handle wool knitted clothes more conveniently.