• 융합신호처리학회논문지
• /
• 제5권2호
• /
• pp.111-118
• /
• 2004

웨이블릿 변환 영역에서 계수 축소 방법의 잡음제거는 알고리즘의 단순함과 잡음제거 효과의 우수함으로 많이 사용되는 방법이다. 계수 축소 방법 중 VisuShrink는 데이터의 수와 잡음편차에 비례하는 universal 경계값을 사용하여 잡음을 제거하는 방법이다. 일반적으로 잡음편차가 알려져 있지 않으므로 universal 경계값 결정을 위해 잡음편차 추정이 필요하다. 그러나 잡음편차 추정 방법은 고주파 대역에서는 알려져 있으나 저주파 대역에 대해서는 알려져 있지 않으므로 기존의 VisuShrink 방법은 저주파 대역의 잡음을 제거할 수 없다. 본 논문에서는 단조변환에 의한 각 대역의 잡음편차를 추정하고, 추정된 편차에 가중값을 곱한 가중편차를 universal 경계값에 적용하여 최저주파 대역을 제외한 모든 대역의 잡음을 Soft-Threshold 기법으로 제거하였다. 그리고 잡음제거 특성을 비교하기 위해 기존의 VisuShrink방법 및 SureShrink방법과의 잡음제거 특성을 비교하였다. 비교 결과 본 논문에서 제시된 잡음제거 방법은 가우시안 잡음과 고압축 양자화 잡음에서 좋은 잡음 제거효과를 보였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.119-123
• /
• 2009

In this paper, effects of major design parameters of cold forging dies on die mechanics are quantitatively investigated with emphasis on shrink fit using a thermoelastic finite element method. A ball-stud cold forging process found in a cold forging company is selected as a test process and the effects of die insert material, shrink fit, dimension of ring, partition of die inert and clamping force on effective stress and circumferential stress are analyzed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.45-53
• /
• 2001

Copper bus-bar is made by drawing process and used in many part of industry. When design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper, to determine shrink fit value is analyzed by automatic shrink fit analysis program, APDL/UIDL language in a commercial FEM package, ANSYS, has been developed that enables optimal design of the dies taking into account the elastic deflections generated in shrink fitting the die inserts and that caused by the stresses generated in the process and by using DEFORM software for drawing process analysis. This data can be processed as load input data for a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.166-171
• /
• 2001

Copper bus-bar is made by drawing process and used in many part of industry. When design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper, to determine shrink fit value is analyzed by automatic shrink fit analysis program, APDL/UIDL language in a commercial FEM package, ANSYS, has been developed that enables optimal design of the dies taking into account the elastic deflections generated in shrink fitting the die inserts and that caused by the stresses generated in the process and by using DEFORM software for drawing process analysis. This data can be processed as load input data for a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• 한국전자통신학회논문지
• /
• 제9권7호
• /
• pp.747-752
• /
• 2014

본 논문은 $0.13{\mu}m$ 기술의 디자인을 10% 축소하는데 기존의 로직 디바이스만의 축소와는 달리 로직뿐 아니라 입, 출력 회로의 축소에 관한 것이다. 게이트 산화막(1.2V)을 decoupled plasma nitridation(DPN) oxide로 변경함으로써 flicker 노이즈를 축소 전 공정에 비해 1/3-1/5배 감소됨을 확인하였다. 또한, 축소에 의한 피할 수 없는 문제는 일반적인 metal insulator metal(MIM)의 캐패시터 문제이다. 이를 해결하기 위하여 20% 높은 MIM 캐패시터($1.2fF/{\mu}m^2$)를 개선하고 그 특성을 평가하였다.

• 한국전자통신학회논문지
• /
• 제9권11호
• /
• pp.1227-1232
• /
• 2014

본 논문은 기존의 poly length만의 축소와 달리 입, 출력 소자를 포함한 core 디바이스의 $0.13{\mu}m$ 디자인을 10% 축소하는 것으로 여러 채널 길이에 따른 body effect와 doping profile simulation을 해석하였다. 축소 전의 DC 파라미터 매칭을 위하여 게이트 산화막의 decoupled plasma nitridation 처리와 LDD(Lightly Doped Drain) 이온주입 전 TEOS(Tetraethylortho silicate) 산화막 $100{\AA}$ 그리고 LDD 이온주입을 22o tilt-angle(45o twist-angle)로 최적화하였고 그 결과 축소 전의 5%의 범위에서 매칭됨을 확인하였다.

• 월간포장계
• /
• 통권289호
• /
• pp.84-87
• /
• 2017

• 월간포장계
• /
• 통권320호
• /
• pp.48-52
• /
• 2019

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.963-968
• /
• 2009

This paper deals with shrink fit analysis of rotor by 2D cross-section, 2D axis-symmetry, and 3D FEM model. And this paper presents 2nd order approximation function of thermal expansion displacement by design variables (shape dimension, heating temperature, sleeve length, interference etc.), table of orthogonal array and RSM(response surface methodology). The possibility of the rotor with shrink fit is evaluated by thermal expansion displacement. If thermal expansion displacement is larger than interference, shrink fit enable to make the rotor. 2D axis-symmetry model and 3D model are more reasonable than 2D cross-section model, because stress and strain is different along length of shaft.

• 대한기계학회논문집A
• /
• 제32권12호
• /
• pp.1140-1145
• /
• 2008

In conventional cutting system of Heat-Shrink-Tube, workers operate cutting system after considering about length and quantity of heat-shrink-tube. So, not only work time and production cost is increased but also material is wasted because the data that workers have to consider is so much. In this paper, an effective cutting system of heat-shrink-tube was developed to reduce production cost, work time and waste of material. The cutting system consists of a supervisory computer installed inside a control room, a on-site computer installed on the work area, and a PLC system. In the developed system, a supervisory computer send work order to the on-site computer using LAN and the on-site computer operates the cutting system of the heatshrink-tube after it makes an array production order. Also, the on-site computer reports information to the supervisory computer when an accident happened.