• 동력기계공학회지
• /
• 제20권3호
• /
• pp.51-56
• /
• 2016

In this study, the tensile tests and hardness tests were carried out for the joints characteristics in friction stir welds of Al 5052 alloy. Three way factorial design was applied to optimal welding conditions, whose control factors were shoulder diameter, rotation speed and welding speed of tool. From the results of this study, the optimum condition for maximum yield strength was predicted as the shoulder diameter of 15 mm, welding speed of 500mm/min and rotating speed of 1000 rpm. And the presumed optimal yield strength was estimated to be $167.36{\pm}7.82MPa$ with 99% reliability. In addition the increaser rotation speed of tool and the decreaser welding speed, the decreaser the hardness at welding part.

• 한국전문물리치료학회지
• /
• 제25권3호
• /
• pp.1-11
• /
• 2018

Background: Lumbopelvic stability is highly important for exercise therapy for patients with low back pain and shoulder dysfunction. It can be attained using a pelvic compression belt. Previous studies showed that external pelvic compression (EPC) enhances form closure by reducing sacroiliac joint laxity and selectively strengthens force closure and motor control by reducing the compensatory activity of the stabilizer. In addition, when the pelvic compression belt was placed directly on the anterior superior iliac spine, the laxity of the sacroiliac cephalic joint could be significantly reduced. Objects: This study aimed to compare the effects of EPC on lumbopelvic and shoulder muscle surface electromyography (EMG) activities during push-up plus (PUP) and deadlift (DL) exercise, trunk extensor strength during DL exercise. Methods: Thirty-eight subjects (21 men and 17 women) volunteered to participate in this study. The subjects were instructed to perform PUP and DL with and without the EPC. EMG data were collect from serratus anterior (SA), pectoralis major (PM), erector spinae (ES), and multifidus (MF). Trunk extensor strength were tested in DL exercise. The data were collected during 3 repetitions of all exercise and the mean of root mean square was used for analysis. Results: The EMG activities of the SA and PM were significantly increased in PUP with pelvic compression as compared with PUP without pelvic compression (p<.05). In DL exercise, a significant improvement in trunk extensor strength was observed during DL exercise with pelvic compression (p<.05). Conclusion: The results of this study indicate that lumbopelvic stabilization reinforced with external pelvic compression may be propitious to strengthen PUP in more-active SA and PM muscles. Applying EPC can improve the trunk extensor strength during DL exercise. Our study shows that EPC was beneficial to improve the PUP and DL exercise efficiency.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.454-464
• /
• 1999

The metal ceramic crown is currently the most popular complete veneer restoration in dentistry, but in many cases, the metal cervical collar at the facial margin is unesthetic and unacceptable. Facial porcelain margin has been used in place of it. But this dose not solve the problems, such as dark gingival discoloration and cervical opaque reflection of porcelain veneer. Recently, metal copings which were designed to terminate its labio-cervical end on the axial walls coronal to the shoulder have been clinically used to solve the esthetic problem of metal ceramic crown. But in this design, porcelain veneer of labio-cervical area which is not supported by metal may not be able to resist the stress during cementation and mastication. The purpose of this study was to evaluate fracture strength and fractured appearance of crowns according to different coping designs. A resin maxillary left central incisor analogue was prepared for a metal ceramic crown, and metal dies were made with duplication mold. Metal copings were made and assigned to one of four groups based on facial framework designs: group 1, coping with 0.5mm metal collar; group 2, metal extended to the shoulder; group 3, metal extended to 1mm coronal tn the shoulder: group 4, metal extended to 2mm coronal to the shoulder. Copings and crowns were adjusted to be same size and thickness, and cemented to metal dies with zinc phosphate cement by finger pressure. Fracture strength was measured with Instron Universal Testing Machine. Metal dies were anchored in Three-way-vice at 3mm below finish line and at $130^{\circ}$ inclined to the long axis of the crown. Load was directed lingually at 2mm below midincisal edge. Load value at initial crack and at catastrophic fracture was recorded. The results obtained were as follows : 1. Fracture strength values at initial crack were higher in groups 1, 2 than in groups 3, 4 but this difference was not statistically significant(P<0.05). 2. Conventional metal collared crown had greater catastrophic fracture strength than any other collarless crowns. 3. The greater the labial metal coping reduction, the lower the catastrophic fracture strength of crowns but when more than 1mm of labial metal reduction was done, the difference in strengths was not statistically significant(p<0.05). 4. The strongest collarless coping design was group 2.

• 한국노년학
• /
• 제29권3호
• /
• pp.987-1000
• /
• 2009

시설입소 인지기능저하 노인은 전반적으로 활동이 부족하며 노화로 인해 근력, 유연성, 평형성 및 협응력 등이 약화되어 일상생활의 불편감 뿐 아니라 사고의 가능성이 증가되어 체계적인 활동 프로그램의 필요성이 절실하다. 본 연구는 탄력밴드를 이용한 탄력저항성운동 프로그램을 시행하여 유연성과 근력에 미치는 효과를 검증하고자 시행되었다. 본 연구는 대조군 전후 실험설계로 연구 대상자는 J시 소재의 노인시설에 거주하는 65세 이상 인지기능저하 노인 34명을 대상으로 하였다. 탄력저항성운동 프로그램 기간은 4주간으로 첫 주 3일간은 사전 조사를 수행하였으며 이후 3주간 오전에 1시간씩 일주일에 5일, 총 15일간 진행하였다. 사후 측정은 운동 프로그램이 종료 후 2일간 이루어졌다. 프로그램 시작 전·후 대상자의 일반적 특성, 일상생활동작, 인지기능, 유연성(견관절 운동범위, 상지관절 주변조직의 신장능력), 근력(악력, 어깨근력)을 측정하였다. 탄력저항성운동 프로그램 시행 후 견관절 운동범위 중 우측 굴곡, 우측 신전, 우측 외회전 범위가 실험군에서 유의하게 증가하였으며 어깨근력의 경우 좌측 굴곡 근력, 좌측 신전 근력, 좌·우측 외전 근력이 대조군에 비해 통계적으로 유의하게 증가한 것으로 나타났다. 반면에 악력과 상지관절 주변조직의 신장능력은 실험군과 대조군에서 유의한 차이가 없었다. 이상의 결과로 탄력저항성운동 프로그램은 시설 입소 노인의 유연성과 근력에 비교적 효과적인 것으로 나타났으나 프로그램의 일반화를 위해 대상자의 신체능력에 맞는 강도와 기간에 변화를 주는 연구와 효과시기, 효과의 소멸시기 등에 관한 연구가 지속되어야 하며 보다 더 정련된 프로토콜을 만들어야 함을 제언하는 바이다.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2240-2250
• /
• 2012

본 연구의 목적은 운동조절과 근력강화 운동이 유방절제술 후 기능부전이 악화되어 유발된 견관절 충돌 증후군 환자에게 미치는 영향을 알아보고자 한다. 유방절제술 후 기능부전이 악화되어 이차적으로 유발된 1-2단계 견관절 충돌 증후군 20명을 무작위로 실험군 10명, 대조군 10명으로 나누었다. 두군 모두 보조적 치료 4주간 주당 4회 40분씩 받았다. 실험군은 추가적으로 운동조절과 근력강화 운동을 60분간 실시하였다. 평가 측정은 실험군과 대조군 모두 실험 전과 후에 악력, 통증강도, 상지둘레, 상지의 불편감정도와 관절가동범위를 측정하였다. 본 연구의 결과는 실험군과 대조군간에 관절가동범위, 상지의 불편감정도에서 유의한 차이(p<.05)를 보였고 악력, 통증강도, 상지둘레는 유의한 차이를 보이지 않았다. 이런 결과들은 운동조절과 근력강화 복합운동프로그램이 유방절제술 후 기능부전이 악화되어 이차적으로 유발된 견관절 충돌 증후군에 안전하면서 효과가 높은 방법임을 알 수 있었다.

• 대한정형도수물리치료학회지
• /
• 제14권2호
• /
• pp.25-33
• /
• 2008

Purpose : This study was investigated the effect on grasp and pinch strength according to degree of flexion in elbow joint. Methods : Thirty male and thirty female students, aged 20 to 31 years were tested for using opened positioning with their shoulder abduction at $55^{\circ}$ and shoulder horizontal adduction at $30^{\circ}$ in four elbow flexion($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$). An electronic dynamometer(E-LINK V900s Evaluation System)and goniometer were used to measure grasp and pinch strength. Results : The average grasp strength of the dominant hand was strongest at elbow $45^{\circ}$ however, weakest at elbow $135^{\circ}$ flexion in both of male and female. The average pinch strength of the dominant hand was strongest at elbow $135^{\circ}$ flexion in both of male and female. The average pinch strength of dominant hand was weakest at elbow $45^{\circ}$ flexion in both of male and female. According to degree of elbow flexion in both of male and female, grasp and pinch strength was no significant statistically. In analyzing correlations, the grasp strength of male showed the most significant difference at elbow $45^{\circ}$ & $90^{\circ}$ flexion, and the pinch strength was most significant difference at elbow $0^{\circ}$ & $45^{\circ}$ flexion. Conclusion : In analyzing correlations, the grasp strength of female showed the most significant difference at elbow $90^{\circ}$ & $135^{\circ}$ flexion, and the pinch strength was most significant difference at elbow $45^{\circ}$ & $90^{\circ}$ flexion.

• Clinics in Shoulder and Elbow
• /
• 제19권2호
• /
• pp.110-116
• /
• 2016

Background: Arthroscopic surgical repair is a better intervention than non-operative (conservative) treatment for patients with shoulder dislocations. This systematic review determined the numbers-needed-to-treat (NNT) and relative risk reduction (RRR) associated with arthroscopic surgical repair versus non-operative treatment in reducing recurrence rates among patients with first-time traumatic anterior shoulder dislocations. Methods: We searched Google Scholar, MEDLINE, SPORTDiscus, and CINAHL from inception in 2015. All articles had to compare arthroscopic surgical repair and non-operative treatment and be written in English. We used the total number of subjects and the number of recurrent dislocations within each treatment to calculate the NNT and RRR for each study and the pooled data. Results: Six articles were selected and all clearly demonstrated that the arthroscopic surgical repair was more effective than non-operative treatment in reducing the recurrence episodes. The pooled NNT was 1.76 (95% confidence interval [CI]=NNT to benefit 1.50-2.13) and the pooled RRR was 86.0% (95% CI=77.0%-92.0%) among individuals who underwent arthroscopic repair. The average follow-up time was 56 months. Conclusions: A Strength of Recommendation Taxonomy level of evidence of 1 with a grade A recommendation supports the use of arthroscopic surgical repair over non-operative treatment in prevention of first-time traumatic anterior shoulder dislocations. We suggest that sports medicine practitioners consider the patients' age, occupation, and physical activity level when making a clinical decision.

• 한국표면공학회지
• /
• 제46권1호
• /
• pp.36-41
• /
• 2013

Friction stir welding (FSW) is a relatively new joining technique particularly for magnesium and aluminum alloys that are difficult to fusion weld. In this study, AZ31 Mg alloys were joined by FSW with shoulder diameter 11, 19 mm and rotating speed 900, 1200, 1500, 1800 rpm. The shoulder diameter and welding speed depended on the heat input during FSW process. As a result, the microstructures of stir zone were a fine grain by dynamic recrystallization. According to the larger shoulder diameter and the higher rotating speed, refined grain sizes of stir zone were grown by higher heat input, and the microhardness of stir zone was lower. The tensile strength at the shoulder diameter 19 mm, rotating speed 900 rpm was obtained maximum value. This value compared with the base metal was over 93%.

• Physical Therapy Rehabilitation Science
• /
• 제8권3호
• /
• pp.152-157
• /
• 2019

Objective: We aimed to investigate differences of range of motion in measuring shoulder internal rotation (IR) and external rotation (ER) resulting from posture change in manual scapular stabilization in prone, hook-lying, sitting, and standing positions in healthy young adults. Design: Cross-sectional study. Methods: This study included healthy young adults who agreed to participate after a thorough explanation about the study purpose and methods. A clinometer was used to measure shoulder rotation. Measurements of shoulder rotation according to postural change were performed in prone, hook-lying, sitting, and standing positions. The repeated measures analysis of variance was used to compare between-group differences in postural change. Results: The lower the posture, the greater the average value of IR angle. In contrast, the higher the posture, the greater the average value of the external rotation angle. In active and passive IR with posture change, there was difference in average value but with no statistical significance. In active and passive ER, there was a statistically significant difference between prone and sitting, prone and standing, hook-lying and sitting, hook-lying and standing, and sitting and standing position (p<0.05). Conclusions: Our findings suggest that postural change should be considered in order to increase the strength or range of motion of the internal and external rotation of the patient's shoulder joint.

• PNF and Movement
• /
• 제12권1호
• /
• pp.33-37
• /
• 2014

Purpose: In this research, the properties of the shoulder joint were measured through eccentric resistive exercise with the patients who have rotator cuff tear of shoulder joints as the targets. Methods: 23 patients who have pain due to the rupture of rotator cuff on shoulder joints were selected and divided into Exercise group (12) and Control group (11). Two groups executed exercise for 30 minutes 3 days a week. Exercise group had executed eccentric resistive exercise, and the Control group executed Complex exercise. Results: In external rotation $180^{\circ}/s$, $240^{\circ}/s$, the Exercise group showed to be an average of 8% higher than the Control group. For Internal rotation $90^{\circ}/s$, $180^{\circ}/s$, $240^{\circ}/s$ the Exercise group showed to be an average of 30% higher that the Control group. Conclusion: To lessen the rupture of rotator cuff on shoulder joints, muscles strengthening is very important across various methods of eccentric exercise programs which are external/internal rotators of the shoulder joint needed for throwing. This is effective in preventing injury and improving rotation.