• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.111-120
• /
• 2008

The characteristic of induced anisotropy is investigated in this study for the Pohang mudstone involving the cut plane discontinuity. The uniaxial and triaxial compression tests are performed for anisotropic rocks with artificial joint to look into anisotropic strength characteristics. Both the uniaxial compressive strength and triaxial compressive strength show the lowest value at the angle of cut plane, ${\beta}=30^{\circ}$ and the shoulder type of anisotropy is obtained. Anisotropy ratio (Rc) in uniaxial compression measures 9.0, whereas Rc=1.29-1.98 in triaxial compression is appeared. A series of analyses are made with the test results to derive the suitable parameter values when it is applied to the Ramamurthy (1985) failure criterion. The result of uniaxial compression test is analyzed by introducing the n-index into Ramamurthy failure criterion. The result shows that, n=l is suitable for ${\beta}=0^{\circ}{\sim}30^{\circ}$ and n=3 is suitable for ${\beta}=30^{\circ}{\sim}90^{\circ}$. To analyze the result of triaxial compression test by Ramamurthy failure criterion, anisotropy ratio in uniaxial compression test is added to Ramamurthy's equation and material constants are estimated by modified Ramamurthy's equation. When these values are applied back to Ramamurthy failure criterion, the predicted values are well fitted to the test results. And strength anisotropy for failure criteria of Jaeger (1960), McLamore & Gray (1967) and Hoek & Brown (1980) are also investigated.

• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.122-129
• /
• 1998

A field experiment was performed to analyze the properties of SFRS(steel fiber reinforced shotcrete) against WMRS(wire mesh reinforced shotcrete) with some experimental parameters. The parameters were reinforcing methods(steel fiber and wire mesh), steel fiber contents(0.5%, 0.75%, and 1.0%), silica fume contents(0.0% and 10.0%), spraying thicknesses of layer(10㎝, 8㎝, and 6㎝), and spraying parts(side wall, shoulder, and crown). According to the analyzed results, the mechanical properties of SFRS such as compressive strength, flexural strength, and load-carrying capacity after cracks were improved. And the economic evaluation was also performed on the basis of the required thickness of the layer and other researcher's results for rebound ratios. From the results of this tests, it is found that the traditional WMRS may be substituted by the SFRS in the viewpoint of the economic evaluation as well as the mechanical properties. In additions, the silica fume, even if it is very expensive, can significantly improve the mechanical properties of the shotcrete regardless of mixing with or without the steel fiber.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.316-318
• /
• 2007

Friction Spot Joining(FSJ) has a strong potential for aluminum alloy joining in automobile industries. The present paper focuses on the attempt to optimize the FSJ process for lap joining of A5052-H32 and A6061-T6 aluminum alloys. For A5052 maximum tensile shear strength has been observed for a tool rotating speed of 800rpm and for A6061 at 1000 rpm. Study on fracture modes of the tensile tested specimens of both A5052-H32 and A6061-T6 revealed, for high tensile strength values, plug fracture mode and lower tensile values, shear fracture mode. Above 2000 rpm distortion of the base metal, beside the tool shoulder was larger and plug fracture mode has been observed.

• Journal of Welding and Joining
• /
• v.32 no.2
• /
• pp.9-13
• /
• 2014

Friction stir welding (FSW) was successfully performed about 900MPa grade Twinning Induced Plastisity (TWIP) steel. A PCBN tool with convex-type shoulder was applied. Optimal process conditions were deduced. Microstructure and mechanical properties such as hardness, tensile strength and impact absorbed energy were observed and evaluated, respectively. An optical microscope (OM) and a field emission scanning electron microscope (FE-SEM) was selected for observing the grain structure.

• The Journal of Korean Physical Therapy
• /
• v.20 no.3
• /
• pp.45-51
• /
• 2008

Purpose: We evaluated the physical stress and pain to the musculoskeletal system of a dental practitioner when engaging in a dental scaling training exercise to prevent the development of musculoskeletal injuries. Methods: The 18 female (average age: 21$\pm$1 years) subjects were voluntarily picked from a group of juniors who have completed a one-and-a-half year training course that includes training exercises on the dentiform and on live subjects (other trainees). The test is done by measuring pain, activity, grip strength, and finger dexterity for each subject's hand and wrist. Before the test all subjects were confirmed to be right-handed and were informed of the study and its objective. Measuring was done before and after each subject performed dental scaling for one hour using the scaler and the curet. Results: Pain levels increased for both hand and shoulders, but hand pain was often greater than shoulder pain. Grip strength significantly declined in the right hand but not the left. For joint mobility, the flexion and the extension for the shoulder joint did not change; but the range of motion for both wrist joints significantly increased. For the dexterity test, both hands showed increased dexterity after the exercise. Conclusion: Dental scaling can affect the shoulders and wrists/hands. Therefore, a musculoskeletal injury prevention program for dental practitioners, which may include encouraging them to assume correct body posture when at work, must be sought. This study evaluated only the shoulders, wrists, and hands; but future studies should include areas such as the cervical area, the back, and the lower limbs.

• Clinics in Shoulder and Elbow
• /
• v.18 no.4
• /
• pp.221-228
• /
• 2015

Background: The The purpose of this study was to make a comparative analysis of the clinical outcomes after the operative treatment of refractory medial epicondylitis between the suture anchor group and the non-suture anchor group. Methods: We enrolled 20 patients (7 men and 13 women) with recalcitrant medial epicondylitis who were able to receive operative treatment in a minimum of an 18-month follow-up. The mean age was 48.6 years (range, 36-59 years). The patients were allocated into either the suture anchor group (7 patients) or the non-suture anchor group (13 patients). We evaluated clinical outcomes using the visual analog scale (VAS), the pain grading system of Nirschl and Pettrone, and postoperative grip strength. Results: The VAS score decreased from 8.8 to 2.0 for the suture anchor group and from 8.6 to 1.3 for the non-suture anchor group (p=0.16). The postoperative grip strength was 95%, 93% of the non-treated arm in both groups (p=0.32). The postoperative satisfaction level was good in 5 patients and fair in 2 for the suture anchor group and excellent in 5 patients, good, in 4, and fair, in 4 for the non-suture anchor group (p=0.43). The clinical outcomes did not show a statistically significant difference between the two groups. Conclusions: We found that patients with recalcitrant medial epicondylitis were treated reliably with satisfactory clinical outcomes whether or not suture anchors were used. We believe the use of suture anchors when more than 50% of the tendon origin is affected provides an effective and favorable treatment modality.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.781-792
• /
• 2015

This study aims to develop a spring/fall motorcycle jacket for quick service transporter. Depending on the results of the previous research, this study produced the tested jacket which was improved in material, pattern, and design. For the tested jacket, 100% polyester fabric excellent in strength, durability and abrasion-resistance was selected as a major material, and Cordura was used as a partial material to improve the strength and abrasion-resistance of the sleeve side lines, elbow and shoulder areas. The retro-reflection material was applied partially in order to improve visibility of the jacket in the night or in a dark place. A total of 7 pockets were composed in the jacket for the sufficient storage spaces. The functional design elements such as the 2-way zipper and the placket at the center front, the action pleats at the upper part of back armholes, the pit-zip at armpit were applied. In addition, the sleeve pattern was bent with the shape of elbow curvature in time of driving and the back length of the jacket was lengthened 4cm. As a result of the appearance assessment, there was a significant difference from the existing jacket in all items but chest size, shoulder width, cuffs circumference, and jacket hemline circumference. In motion adaptability and field activity appropriateness assessments, the assessment grade for all items was found to be commonly higher than that of the existing jacket, and thus, the tested jacket was assessed to be suitable for a motorcycle jacket design for the quick service transporters.

• Journal of Society of Preventive Korean Medicine
• /
• v.14 no.3
• /
• pp.37-49
• /
• 2010

Objective : Qigong has been reported as an effective for post-mastectomy women. It consists of a series of postures combined with slow, smooth, graceful movements, and is considered a low intensity exercise. In this study, a specialist of Qigong developed a Qigong program for post-mastectomy women in a community. The object of this research is to evaluate the effect of Qigong on a subjective symptom scale, on the grade of discomfort and pain in everyday life, BMI, fat(%), muscular strength, shoulder joint movement, in post-mastectomy women. Methods : The study used a non-equivalent control group non-synchronized design. The experimental group received a Qigong 3 times a week for 12 weeks from September 7th to December 28th in 2009. The subjects were 40 patients are divided into 25 persons in experimental groups and 15 persons in contrastive group. The data were analyzed with descriptive statistics, chi-square test, t-test, Mann-Whitney U test. A P-value less than .05 was considered significant by 2-tailed test. All statistical analyses were performed with SPSS win(ver 12.0). Results : The results were as follows : The score in the subjective symptom(p=.040), and score of anxiety (p=.024), fat(%)(p=.007) were significantly decreased after Qigong program. The values for shoulder flexibility (left : p=.010, right : p=.008), and Muscular strength(grip power)(left : p=.021, right : p=.029) significantly increased after Qigong program. And Flexion(left ; p=.029), Extension(left : p=.001, right : p=.038), Adduction(left ; p=.001, right ; p<0.001) were also significantly increased after Qigong Conclusions : The Qigong is an effective health promotion program for post-mastectomy women.

• Clinics in Shoulder and Elbow
• /
• v.10 no.2
• /
• pp.155-159
• /
• 2007

Arthroscopic single-row rotator cuff repair is a well established surgical technique for the treatment of rotator cuff tears. However, the problem of postoperative retear remains a concern. Various avenues are being explored to address this problem. Some studies have suggested that restoring the anatomical footprint may improve the healing and initial strength of the repaired rotator cuff tendon. The double-row technique was introduced as a method of reconstructing the anatomical footprint. According to biomechanical studies on cadavers, this technique improved mechanical strength and reduced gap formation. However, the biological properties of reattached tendon such as tension, and vascularity have not been proved yet. Furthermore, the apparent mechanical superiority of the double-row over the single-row construction has not resulted in better functional outcomes. Therefore, the less complicated and less costly single-row technique is still the recommended treatment for rotator cuff repairs.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.4
• /
• pp.103-116
• /
• 2021

PURPOSE: This study examined the effects on the upper extremity function, muscle strength, and hand function of a task-oriented training approach using a percussion instrument for patients with chronic stroke. METHODS: Twenty-four chronic stroke patients accompanied with upper extremity hemiplegia were selected for research and were classified randomly into 12 experimental groups and 12 control groups. The experimental group performed a task-oriented approach, and the control group performed upper extremity occupational therapy. Stroke upper extremity test, Jebsen-Taylor Hand Function test, upper extremity muscle strength test, and hand muscle strength test were measured before and after training in the evaluation process. RESULTS: In the upper extremity test and Jebsen-Taylor test, there were no significant differences between the groups. In the upper extremity muscle strength test, there were significant differences in shoulder flexion, internal rotation, and elbow flexion in the experimental group. In the hand muscle strength test, there were significant differences in the grip, tip Pinch, lateral Pinch, and 3-jaw chuck in the experimental group and significant differences in only grip, tip pinch, and lateral pinch in the control group. In addition, there were significant differences in the lateral pinch compared to the amount of change. CONCLUSION: Task-oriented approach using percussion instruments for upper extremity rehabilitation in stroke patients is effective in the upper extremity function and strength, hand function, and strength.