• Journal of Korean Physical Therapy Science
• /
• v.20 no.1
• /
• pp.43-49
• /
• 2013

Background and purpose : The shoulder joints permit the greatest mobility of any joint area carries out the important function of stabilization for hand use. Research has now shown that grip strength has proven to be a reliable indicator for quality of life at an older age. The purpose of this study was to investigate the effects of testing posture and shoulder position on grip strength for repetitive gripping task. Methods : Forty(20male, 20female) college adult volunteers with no known shoulder dysfunction participated subject in two testing posture(sitting and standing) and three positions with shoulder flexion: (1) shoulder $0^{\circ}$ flexion (2) shoulder $90^{\circ}$ flexion (3) shoulder $180^{\circ}$ flexion. The paired t-test was used to determine any significant difference in grip strength between the testing posture and shoulder position. Results : The higher grip strength gained in the sitting with the shoulder $180^{\circ}$ flexion and the higher grip strength gained in the standing with the shoulder $180^{\circ}$ flexion. The second experiment showed that the grip strength was significant for sitting, standing position of shoulder $0^{\circ}$ flexion( p<0.05). Grip strength goes up as increase height and weight. Conclusion : These findings demonstrate that the theory does not fit with, because of the influence of gravity, a measure from the shoulder joint is the most high, $0^{\circ}$. And sitting posture and stance in the grip of a difference when compared SIT $0^{\circ}$ and standing position $0^{\circ}$ significant difference in indicated but, $90^{\circ}$ and $180^{\circ}$ in the sitting position and stance in the grip of the difference was not significant difference. To demonstrate the universality of this study's results, future studies should have a larger and more subject as well as a more even distribution of male and female subject. Therefore future research is needed to refine the definition and identify optimal methods of measuring this grip strength.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.2
• /
• pp.9-16
• /
• 2015

PURPOSE: The objective of this study was to identify the effects of shoulder abduction strength and EMG activities of the selected scapular and shoulder muscles during isometric shoulder abduction. METHODS: Thirty-four healthy young females were recruited for this study. Surface EMG equipment with inline force sensor was used to determine the shoulder abductor strength and the activity of the serratus anterior (SA), upper trapezius (UT), lower trapezius (LT), and middle deltoid (MD) during three shoe heel height conditions: (1) barefoot, (2) 3-cm shoe heel height, and (3) 7-cm shoe heel height. RESULTS: Isometric shoulder strength showed statistically significant difference among the conditions (p<0.05), and post-hoc test showed lower strength during the 7-cm condition ($49.98{\pm}17.56kg$) than during the barefoot ($44.97{\pm}20.15kg$) and 3-cm conditions ($36.59{\pm}17.07kg$). Furthermore, EMG activities of the SA, UT, and MD appeared to be statistically significantly different among the conditions, with lower values in the 7-cm condition compared to the barefoot condition (p<0.05). EMG ratios (MD/UT and SA/UT) were lower during the 7-cm condition than during the barefoot condition (p<0.05). CONCLUSION: These findings suggest that isometric shoulder abduction strength and EMG activities of scapular and shoulder muscles may be adversely changed with increasing shoe heel height.

• The Journal of Korean Physical Therapy
• /
• v.33 no.5
• /
• pp.252-257
• /
• 2021

Purpose: The purpose of this study was to compare the influence of external scapular stabilization on the isometric strength of shoulder flexor muscle in subjects with and without scapular winging and conditions with and without external scapular stabilization. Methods: A total of 30 subjects with and without scapular winging were enrolled. Two groups were classified using clinical and diagnostic tests to divide the groups with and without scapular winging (15 with scapular winging 15 without scapular winging). The isometric strength of the shoulder flexor was measured using a tensiometer. The isometric strength was evaluated in the sitting position with and without an external scapular stabilization. The external scapular stabilization was provided with the examiner's hand to fix scapular winging during shoulder flexion. The changing value was calculated to determine the isometric strength difference between shoulder flexion with and without the external scapular stabilization in each group. The changing value between isometric strength of shoulder flexor with and without scapular winging was compared using the independent t-test. Statistical significance was set at 0.05. Results: In the group with scapular winging, the shoulder flexor isometric strength in the sitting position was greater with an external scapular stabilization than without an external scapular stabilization (p<0.05). There was no significant difference in the shoulder flexor isometric strength in the subjects without scapular winging between conditions with or without an external scapular stabilization (p>0.05). Conclusion: The external scapular stabilization in the individuals with scapular winging may increase shoulder flexor isometric strength in the sitting position.

• The Journal of Korean Physical Therapy
• /
• v.19 no.6
• /
• pp.17-22
• /
• 2007

Purpose: To evaluate the quantitative isometric muscle strength of shoulder girdle and the test reliability using by the equipment, named 'IsoTrack', selected by authors in the former studies. Methods: Thirty healthy subjects (9 men, 21 women) were recruited in two sessions, one for intratester and intertester reliability tests and the other quantitative isometric muscle strength tests. The neck flexion, extension and scapular elevation muscle strength was measured using a force measuring device as IsoTract. Results: Intraclass correlation coefficients for intratester reliability of the all subjects ranging between 0.96 and 0.97. For intertester reliability, the ICC and Pearson correlation correspond to 0.84 and 0.78. We gauged muscle strength of shoulder girdle muscles based on it and indicated quantified isometric muscle strength of women and men in left and right side. Conclusion: We concluded that there were high reiliability of isometric muscle strength of neck and shoulder girdle. Also, we gauged muscle strength of shoulder girdle muscles based on it and indicated quantified isometric muscle strength in left and right side in women and men. So this findings may assist in the measure of whole body muscle strength.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.296-307
• /
• 1997

The purpose of this study was to compare the fracture strength of the IPS-Empress ceramic crown according to margin types such as bevel, shoulder, rounded shoulder, shoulder with bevel, rounded shoulder with bevel and bevel with groove. After 10 metal dies were constructed for each group, the IPS-Empress ceramic crown were fabricated and each crown was cemented on each metal die with Bistite resin cement. The cemented crowns mounted in the testing jig were inclined 30 degree and universal testing machine (Zwick 1456 41, Zwick Co., Germany) was used to measure the fracture strength. The obtained results were as follows : 1. The fracture strength of the crown with rounded shoulder was the highest of all. The mean fracture strength was 484N in rounded shoulder, 357N in bevel, 341N in rounded shoulder with bevl, 300N in shoulder with bevel, 280N in shoulder and 275N in bevel with groove. 2. The fracture strength of rounded shoulder was statistically different from those of shoulder with bevel, shoulder and beve41 with groove. 3. In the strain at fracture, there was no significant difference among each group. 4. The fracture mode of the crown was similar and most of fracture line began at the loading area and extended through proximal surface perpendicularly to the margin, irrespective of margin type.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.46-53
• /
• 2002

Push-pull strength has been found to be associated with various work factors such as height, distance, repetition, duration, posture and individual factors. Therefore, this study was performed to investigate the effect of various work factors on push-pull strength and muscle recruitment pattern. Work factors were consisted of grip height(elbow, shoulder), grip distance(100%, 50%, and 25% of maximum grip distance) and shoulder angle(neutral($90^{\cire}$), and abduction($45^{\cire}$, $0^{\cire}$)) during sitting work. The results showed that the normalized strength and EMG value were higher at the elbow height than the shoulder height, and increased with grip distance and shoulder adduction. The results of ANOVA showed that there was significant difference on muscle recruitment patterns among the task conditions. Therefore, it is necessary to consider work factors as well as strength to prevent workers from work-related injuries.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.1
• /
• pp.13-20
• /
• 2021

Background: The serratus anterior and upper trapezius muscles act synergistically to allow for an appropriate scapulothoracic rhythm. However, a decrease in serratus anterior activation causes the upper trapezius to become overactivated, resulting in dysfunction. This study compared serratus anterior and upper trapezius muscle activity according to sling angle and compared serratus anterior strength between healthy adults and patients with shoulder instability. Methods: Twenty participants (10 healthy adults and 10 patients with shoulder instability) were included in this study. The participants had their arms extended at sling angles of 30°, 60°, and 90° in reach forward with shoulder flexion using goniometer. Serratus anterior strength was measured three times while the participants were supine. The outcome measures were surface electromyography amplitude of the upper trapezius and serratus anterior and serratus anterior strength. Results: The Wilcoxon signed-rank test indicated that the upper trapezius was significantly different between healthy group and shoulder instability group at a sling angle of 60°, and both the upper trapezius and serratus anterior exhibited significant differences at 90°. Moreover, a significant difference was noted in the muscle strength of the serratus anterior. Conclusion: Our results provide novel and promising clinical evidence that patients with shoulder instability have decreased serratus anterior activation and upper trapezius overactivation, resulting in muscle imbalance. In addition, there was a significant difference between the healthy group and shoulder instability group in the serratus anterior muscle strength

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.125-134
• /
• 2009

The muscle strengths in various postures are used in our daily life with or without our recognition. Also, many works are still performed with strengths, although mechanization and automation have been fairly accomplished at the industry site. Since the late seventies, various body measurements have been conducted periodically in Korea, however, muscle strengths have not been measured actively. For this reason, the muscle strength data have been hardly accumulated. The aims of this study are to learn more about the physical strength of young-aged Koreans and to provide basic information for designing equipments, tools and facilities in the work site and daily life. The muscle strengths that are related to shoulder and upper limbs joints, which are used frequently, are measured in this study. Eighteen muscle strengths, from seven different movements such as elbow flexion, elbow extension, shoulder abduction(seated), shoulder adduction(seated), shoulder rotation(internal and external), lifting a tray, and turning a key(inward and outward) were measured. For every movement, the muscle strengths for both hands were measured. In each measurement, five seconds averaged value and peak value were collected. Comparing the average value, the strength of shoulder adduction was the strongest for male and female, while strength of turning a key inward with left hand was the weakest for male and female. Strengths of preferred hand in elbow extension, shoulder abduction, shoulder external rotation, lifting a tray, and turning a key were stronger than those of non-preferred hand for both male and female. Rohrer's index considerably had an effect on muscle strength. The results of this study can provide some basic information not only in designing the equipment and facilities in work site or daily life, but also in selection, training and management of workers.

• PNF and Movement
• /
• v.10 no.1
• /
• pp.9-17
• /
• 2012

Purpose : This study's purpose is consideration about change of the hand grip strength according to different posture and shoulder flexion angle. The shoulder joint permits the greatest mobility and carries out the important function of stabilization for hand use. Hand grip activity is important to evaluate while assessing loads of shoulder in hand mobilities. Methods : Thirty(15 male, 15 female) college students with unknown shoulder dysfunction participated subject in five different positions of elbow extension with sitting and standing posture, different positions is followed : (1) shoulder $0^{\circ}$ flexion (2) shoulder $45^{\circ}$ flexion (3) shoulder $90^{\circ}$ flexion (4) shoulder $135^{\circ}$ flexion (5) shoulder $180^{\circ}$ flexion. Results : On the average, in the hand grip strength, the standing posture is higher than sitting posture. Sitting posture showed a most high level at the man's $0^{\circ}$ and woman's $135^{\circ}$. And standing posture showed a most high level at the man's $135^{\circ}$ and woman's $90^{\circ}$. Conclusion : The paired t-test was used to determine the different in grip strength between sitting and standing posture by shoulder angle change. There was no significant difference between the five position by sitting and standing posture. In man, correlation analysis revealed significant connection for all five position by sitting and standing posture. And in woman, correlation analysis revealed connection for all five position by sitting and standing posture.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.21-26
• /
• 2018

PURPOSES : The objective of this study is to evaluate the application of soil stabilization method for soft shoulder construction in the iRoad Project of Sri Lanka. METHODS : Firstly, the quantitative analysis of soil strength improvement due to soil stabilization was done for soil samples collected from iRoad construction sites. Two types of soils were selected from iRoad Project sites and prepared for soil stabilization testing by the Road Development Authority. Secondly, the appropriate stabilizer was selected at given soil type based on test results. Two different stabilizers, ST-1 and ST-2, produced in Korea were used for estimating soil strength improvements. Finally, the optimum stabilizer content was determined for improving shoulder performance. The uniaxial compressive strength (UCS) test was conducted to evaluate the strength of stabilized soil samples in accordance with ASTM D 1633. The use of bottom ash as a stabilizer produced from power plant in Sri Lanka was also reviewed in this task. RESULTS : It is found from the UCS testing that a 3% use of soil stabilizer can improve the strength up to 2~5 times in stabilized soft shoulder soils with respect to unstabilized soils. It is also observed from UCS testing that the ST-1 shows high strength improvement in 3% of stabilizer content but the strength improvement rate with increase of stabilizer content is relatively low compared with ST-2. The ST-2 shows a low UCS value at 3% of content but the UCS values increase significantly with increase of stabilizer content. When using the ST-2 as stabilizing agent, the 5% is recommended as minimum content based on UCS testing results. Based on the testing results for bottom ash replacement, the stabilized sample with bottom ash shows the low strength value. CONCLUSIONS : This paper is intended to check the feasibility for use the soil stabilization technique for shoulder construction in Sri Lanka. The use of soil stabilizer enables to improve the durability and strength in soft shoulder materials. When applying the bottom ash as a soil stabilizer, various testings should be conducted to satisfy the specification criteria.