• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.1
• /
• pp.51-59
• /
• 2006

The study is diagnosis about fatigue failure phenomenon of heating coil spring (sup9) and heat treatment method that is used to crusher. Because more than 80~90% of damage announcement of breakdown of machine and construction is been caused in fatigue present state, fatigue failure became important leading person at design. Calculated design load is imposed repeatedly that fatigue breakdown is safe. Is phenomenon that change load is imposed in the construction continuously. Used coil spring applies heat 30minute by Quenching temperature $860^{\circ}C$ if see manufacturing process and temperature of gasoline of $50^{\circ}C$ keep after quench that know tempering a $460^{\circ}C$ 90minute a product be. If doto apply heat $950^{\circ}C$ material at rolling process historically before quenching, austenite formation clay pipe being done AGS(Austenite Grain Size) by 2.5~4 become. Apply heat quenching 30minute by $820^{\circ}C$ by improvement method and after quench that keep $50^{\circ}C$ in oil tempering if do $450^{\circ}C$, 90minute spring ideal formation sorbite formation of the river form and condition that satisfy most more than AGS 7 appeared. Also, we can secure authoritativeness through MT since shot peening processing.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.99-102
• /
• 2009

We report our development of the fabrication process of sub-micron scale $Al-AlO_x-Al$ tunnel junction by using electron-beam lithography and double-angle shadow evaporation technique. We used double-layer resist to construct a suspended bridge structure, and double-angle electron-beam evaporation to form a sub-micron scale overlapped junction. We adopted an e-beam insensitive resist as a bottom sacrificing layer. Tunnel barrier was formed by oxidation of the bottom aluminum layer between the bottom and top electrode deposition, which was done in a separate load-lock chamber. The junction resistance is designed and controlled to be 50 $\Omega$ to match the impedance of the transmission line. The junctions will be used in the broadband shot noise thermometry experiment, which will serve as a link between the electrical unit and the thermodynamic unit.

• Journal of the Korean Society of Costume
• /
• v.60 no.2
• /
• pp.99-113
• /
• 2010

The corpse make-up depending on the cause of death shown in CSI is the only evidence to solve a case, and shows the characteristics of the unique make-up on the corpse, according to the causes of death. There are many types of death causes such as strangulation, manslaughter, assassination and shooting, of which the strangulation is caused by strangling the neck with the hands or using a weapon and has characteristics of showing other external wounds with purple spots appearing on the body after death. This is a presentation of the corpse with a face of white, and the purple spots bruised on the neck. Manslaughter shows deep wounds caused by a stab or laceration using a weapon, and the material feeling of the wound that makes new skin tissue, is realistically presented with make-up of gooey blood. Assassination can be thought as manslaughter in disguise as an accidental death, which the causes can be due to electrocution, suffocation from oxygen deficiency and from excessive monoxide. The make-up is presented by realistically showing the surrounding fragments of the bullet shell, the blood running down, the size of the hole in the body made from the bullet, and shows the broken skin tissues. The shape of the bullet wound can be presented differently based on the body part where the bullet penetrated into, and the part where the bullet shot out through.

• Cartoon and Animation Studies
• /
• s.20
• /
• pp.31-45
• /
• 2010

Stereoscopic 3D animation contents are in the rise as a key part of contents market. Major animation studios are planning to produce 3D animations in a stereoscopic process. This study aims at understanding the visual textuality of 3D animation contents at its early stage. To understand 3D animation, , are analyzed. Stereoscopic 3D animations are exploring the new visual aesthetics using the specific storytelling, sequence ordering, camera working, shot size and camera angles etc. Based on these visual textualities, stereoscopic 3D animations are constructing telepresence, multi-senses of individual spectators. Stereoscopic 3D animations have formed their own aesthetics and cultural meanings in the digital age.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.65-65
• /
• 2011

Early-type galaxies represent the end point of galaxy evolution and, despite pervasive residual star formation, are generally considered "red and dead", that is composed exclusively of old stars with no star formation. Here, their molecular gas content is constrained and discussed in relation to their evolution, supporting the continuing importance of minor mergers and/or cold gas accretion. First, as part of the Atlas3D survey, the first complete, large, volume-limited survey of CO in normal early-type galaxies is presented. At least of 23% of local early-types possess a substantial amount of molecular gas, the necessary ingredient for star formation, independent of mass and environment but dependent on the specific stellar angular momentum. Second, using CO synthesis imaging, the extent of the molecular gas is constrained and a variety of morphologies is revealed. The kinematics of the molecular gas and stars are often misaligned, implying an external gas origin in over a third of all systems, more than half in the field, while external gas accretion must be shot down in clusters. Third, many objects appear to be in the process of forming regular kpc-size decoupled disks, and a star formation sequence can be sketched by piecing together multi-wavelength information on the molecular gas, current star formation, and young stars. Fourth, early-type galaxies do not seem to systematically obey all our usual prejudices regarding star formation (e.g. Schmidt-Kennicutt law, far infrared-radio continuum correlation), suggesting a greater diversity in star formation processes than observed in disk galaxies and the possibility of "morphological quenching". Lastly, a first step toward constraining the physical properties of the molecular gas is taken, by modeling the line ratios of density- and opacity-sensitive molecules in a few objects. Taken together, these observations argue for the continuing importance of (minor) mergers and cold gas accretion in local early-types, and they provide a much greater understanding of the gas cycle in the galaxies harbouring most of the stellar mass. In the future, better dust masses and dust-to-gas mass ratios from Herschel should allow to place entirely independent constraints on the gas supply, while spatially-resolved high-density molecular gas tracers observed with ALMA will probe the interstellar medium and star formation laws locally in a regime entirely different from that normally probed in spiral galaxies.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.70-79
• /
• 2013

The film language is distinguished roughly according to shot angles and size and camera movement. The film language is what the performer should be well-acquainted with in camera acting. Since the most important characteristics of acting in front of the camera lies in being with the camera, the relationship between the camera and the performers is basically mutual communication and is the inseparable relationship in which they should be well acquainted with each other. Understanding of diverse film languages for acting in front of the camera enables the performer to adapt to the media quickly and to concentrate on acting. Performance changes according to the media or environment in which acting is performed. For a good performance, the performers should be able to appropriately express their own acting according to the characteristics of the space or the media in which they do performance. Acting in front of the camera is clearly distinguished from acting on the stage in the aspects of either media characteristics or acting. With the manifestation of extemporaneousness and the discovery of the performers' personality to the extent possible, performers themselves proceed with creative works in collaboration with the director in acting in front of the camera and can attain the development of acting in front of the camera.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.530-539
• /
• 2002

Recently, there have been a lot of researches to develop an archive system for news videos that usually has a fixed structure. However, since the meta-data representation and storing schemes for news video are different from each other in the previously proposed archive systems, it was very hard to exchange these meta-data. This paper proposes a scheme for news video based on MPEG-7 MDS that is an international standard to represent the contents of multimedia, and a summarization mechanism reflecting the characteristics of shots in the news videos. The proposed scheme for news video uses the MPEG-7 MDS schemes such as VideoSegment and TextAnnotation to keep the original structure of news video, and the proposed summarization mechanism uses a slide-show style presentation of key frames with associated audio to reduce the data size of the summary video.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.341-349
• /
• 2019

Today, art education needs education of media image production or media in the extended field. The purpose of this study is to develop the basic visual grammar and communication ability. We developed and applied the teaching plan for the interview video production as the fusion lesson. 3 classes were conducted for 30 middle school students. The results obtained through the analysis of the pre & post questions and student works are as follows. First, the students used the shot size and stable composition through the interview video production. As a result, this class was effective for the acquisition of the basic video grammar. Second, students improved their ability to ask and listen, understand and organize through interview. As a result, students were able to apply the basic video grammar through the interview video production lesson, effectively producing the interview image.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.93-98
• /
• 2023

As semiconductor devices become highly integrated and process difficulty increases, the need for highly sensitive sensors that can detect micro leaks is increasing. However, the noise contained in the CCD sensor itself acts as an obstacle to detecting fine leaks. In this study, integration time was changed for each condition, the sensor was cooled to 0℃, and the dark voltage level was measured to confirm through experiment the characteristics of the temporal noise included in the CCD sensor, a component of OES (Optical Emission Spectroscopy). When integration time was reduced from 30msec to 10msec, the dark voltage level decreased by about 20.5 % from an average of 151.5mV to 120.5mV. In the case of cooling device, Peltier elements were selected because of their simple structure and small size. During temperature cooling, the target temperature was controlled to within ±0.5℃ through PID control. When cooled from 20℃ to 0℃ using this cooling device, it was confirmed that the dark voltage level decreased by about 7% from an average of 147.0mV to 137.0mV.

• Korean Journal of Radiology
• /
• v.22 no.4
• /
• pp.513-524
• /
• 2021

Objective: To assess the noncontrast two-dimensional single-shot balanced turbo-field-echo magnetic resonance angiography (b-TFE MRA) features of the abdominal aortic aneurysm (AAA) status following endovascular aneurysm repair (EVAR) and evaluate to detect endoleaks (ELs). Materials and Methods: We examined four aortic stent-grafts in a phantom study to assess the degree of metallic artifacts. We enrolled 46 EVAR-treated patients with AAA and/or common iliac artery aneurysm who underwent both computed tomography angiography (CTA) and b-TFE MRA after EVAR. Vascular measurements on CTA and b-TFE MRA were compared, and signal intensity ratios (SIRs) of the aneurysmal sac were correlated with the size changes in the AAA after EVAR (AAA prognoses). Furthermore, we examined six feasible b-TFE MRA features for the assessment of ELs. Results: There were robust intermodality (r = 0.92-0.99) correlations and interobserver (intraclass correlation coefficient = 0.97-0.99) agreement. No significant differences were noted between SIRs and aneurysm prognoses. Moreover, "mottled high-intensity" and "creeping high-intensity with the low-band rim" were recognized as significant imaging findings suspicious for the presence of ELs (p < 0.001), whereas "no signal black spot" and "layered high-intensity area" were determined as significant for the absence of ELs (p < 0.03). Based on the two positive features, sensitivity, specificity, and accuracy for the detection of ELs were 77.3%, 91.7%, and 84.8%, respectively. Furthermore, the k values (0.40-0.88) displayed moderate-to-almost perfect agreement. Conclusion: Noncontrast MRA could be a promising imaging modality for ascertaining patient follow-up after EVAR.