• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.3
• /
• pp.111-121
• /
• 2009

Objectives : The Purpose of this study was to investigate the clinical application of traditional Korean herbal therapy to a patient with thoraco-lumbar compression fracture. Methods : The patient who had sudden low back pain, back pain and ambulation disorder due to pain caused by an accidental fall, we prescribed Doinseunggi-tang (Taorenchenqi-tang) for her with acupuncture therapy. And we adopted several scales to estimate to progress of her symptoms. Results : Soon after taking herbal medication with other treatments, the patients pain was controlled and was able to ambulation without pain. Conclusions : In this case, we assume that Doinseunggi-tang(Taorenchenqi-tang) play an important role in improvement of the patient's symptoms. So, the present results suggest that traditional Korean herbal therapy has the positive effect to reduce the pain and shortening the period of treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.589-598
• /
• 2001

The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement of heat-cured PMMA resin using glass fibers, have been suggested over the years. The aim of the present study was to investigate the effect of short glass fibers treated with silane coupling agent on the transverse strength of heat-polymerized PMMA denture base resin. To avoid fiber bunching and achieve even fiber distribution, glass fiber bundles were mixed with PMMA powder in conventional mixer whose blade was modified to be blunt. Composite of glass fiber($11{\mu}m$ diameter, 3mm & 6mm length, silane treated) and PMMA resin was made. Transverse strength and Young's modulus were estimated. Glass fibers were incorporated with 1%, 3%, 6% and 9% by weight. Plasticity and workability of dough was evaluated. Fracture surface of specimens was investigated by SEM. The results of this study were as follows 1. 6% and 9% incorporation of 3mm glass fibers in the PMMA resin enhanced the transverse strength of the test specimens(p<0.05). 2. 6% incorporation of 6mm glass fibers in the PMMA resin increased transverse strength, but 9% incorporation of it decreased transverse strength(p<0.05). 3. When more than 3% of 3mm glass fibers and more than 6% of 6mm glass fibers were incorporated, Young's modulus increased significantly(p<0.05). 4. Workability decreased gradually as the percentage of the fibers increased. 5. Workability decreased gradually as the length of the fibers increased. 6. In SEM and LM, there was no bunching of fibers and no shortening of fibers.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.314-318
• /
• 2005

For treatment of full thickness skin defects caused by trauma or infections, skin grafts or flaps have been the treatment of choice to date. However, in patients who are not candidates for surgery, either due to his general conditions or refusal to receive treatment, supportive methods have been the only means of care, which inherently caused psychological trauma to the patient due to uncertainties of ultimate outcome and the length of treatment. This study aimed to heal full thickness skin defects through application of topical epidermal growth factor in patients who have received 2 to 3 weeks of conservative management using medifoam $B^{(R)}$ without improvement. Six patients from March 2002 to July 2004 were enrolled. The mean size of defects was $5.4{\times}4.6cm$ in 4 patients with carcinoma and $6.4{\times}4.1cm$ in 2 patients with osmidrosis. Commercially available 0.005% EGFR solution was used, and dressing was performed once daily. All patients benefitted from the use of EGF, with closure of skin defects taking an average of 28 days in cancer patients and 22.5 days in osmidrosis cases. EGF can be used as a supportive mean of treatment in the inoperable patients with skin defects, with resultant hastening of healing shortening duration of treatment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.4
• /
• pp.494-499
• /
• 2002

The objectives of this study were to document the reproductive traits of mares as influenced by the month of the year in Taiwan. Reproductive records, lactation traits, foal birth weight (FBW) and foal height (FBH) were collected from Holi Equine Station of Taiwan. The effects of month on these parameters were analyzed. The length of estrus (LE) was shortest in December each year. The increasing trend was recorded from January to September with a significantly (p<0.05) longer period of $12.4{\pm}0.4$ days in September than in January and February. A gradual shortening in LE was observed from September to December ($10.1{\pm}0.6$ days, p<0.05), when the shortest period of the year was observed. Mares showed signs of estrus throughout the year, but more than 80% were found in estrus during March through October. The FBW was significantly (p<0.05) affected by the breeding month of the year. The lowest foal weights were recorded in both September ($36.7{\pm}0.7$ kg) and December ($36.8{\pm}0.9$ kg), which were also significantly lower than those in other months except in March, August, and November. A trend of lower FBH from September to December (93.5-93.8 cm) than those from January to August was observed. The greatest FBH was in June (96.2 cm). Breeding months and onset of estrus of the mares exerted a significant effect on the incidence of agalactia during the lactation period. These analyses provide fundamental information on adaptive processes in respect to reproductive characteristics of mares, which indicated an extent of acclimation by these animals in subtropical Taiwan.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.297-300
• /
• 2007

In this study, we have attempted a new method to enhance the coloring of dye on the $TiO_2$ surface in the dye sensitized solar cell. In the conventional coloring process in a dye sensitized solar cells, dye is absorbed by the covalent bond between TiO2 and dye molecule while the photo-electrode coated with $TiO_2$ layer is soaked in dye solution for about 12-24 hours. But this process takes long time, so we have researched more effective and faster way than the conventional process by applying electric field. Three kinds of electric power such as direct voltage, alternating voltage and pulse voltage were applied to the transparent conducting oxide during the coloring process. As a result, we achieved improved power, fill factor and efficiency of dye-sensitized solar cell in case of applying direct voltage and pulse voltage. In contrast, alternating voltage tend to reduce the dye adsorption on the $TiO_2$ surface and hence the efficiency. We measured the absorption spectra of dye by UV-VIS spectrophotometer before and after soaking the $TiO_2$ in the dye and found no characteristic change in the dye was observed. In this study, we researched on shortening time of coloring process which spent much time in the whole process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.39-45
• /
• 1999

Refining in papermaking plays an important role in changing fiber properties as well as paper properties. The major effects of refining on pulp fibers are internal and external fibrillation, fiber shortening, and fines formation. Many workers showed that internal fibrillation of the primary refining effects was most influential in improving paper properties. In particular, refining produces separation of fiber walls into several lamellae, thus causing fiber wall swelling with water penetration. This leads to the increase of fiber flexibility and of fiber-to-fiber contact during drying. If the fibers are very flexible, they will be drawn into close contact with each other by the force of surface tension as the water is removed during the drainage process and drying stages. In order to study the effect of fiber wall delamination on paper properties, cross-sectional image of fibers in a natural condition had to be generated without distortion. Finally, it was well recognized that confocal laser scanning microscope (CLSM) could be one of the most efficient tool for creating and quantifying fiber wall delamination in combination with image analysis technique. In this study, the CLSM could be used not only to observe morphological features of transverse views of swollen fibers refined under low and high intensity, but also to investigate the sequence of fiber wall delamination and fiber wall breakage. From the CLSM images, increasing the specific energy or refining decreased the degree of fiber collapse, fiber cross-sectional area, fiber wall thickness and lumen area. High intensity refining produced more external fibrillation.

• Phonetics and Speech Sciences
• /
• v.9 no.3
• /
• pp.25-32
• /
• 2017

Besides their effect on the f0 contour of the following vowel, Korean stops are undergoing a sound change in which a partial or complete consonantal merger on voice onset time (VOT) is taking place between aspirated and lax stops. Many previous studies on sound change have mainly focused on group-normative effects, that is, effects that are representative of the population as a whole. Few systematic quantitative studies of change in adult individuals have been carried out. The current study examines whether the sound change holds for individual speakers. It focuses on inter-speaker and intra-speaker variability on sound change in contemporary Korean. Speech data were collected for thirteen Seoul Korean speakers studying abroad in America. In order to minimize the possible effects of speech production, socio-phonetic factors such as age, gender, dialect, speech rate, and L2 exposure period were controlled when recruiting participants. The results showed that, for nine out of thirteen speakers, the consonantal merger is taking place between the aspirated and lax stop in terms of VOT. There were also intra-speaker variations on the merger in three aspects: First, is the consonantal (VOT) merger between the two stops is in progress or not? Second, are VOTs for aspirated stops getting shorter or not (i.e., the aspirated-shortening process)? Third, are VOTs for lax stops getting longer or not (i.e., the lax-lengthening process)? The results of remarkable inter-speaker and intra-speaker variability indicate a synchronous speech sound change of the stop system in contemporary Korean. Some speakers are early adopters or active propagators of sound change whereas others are not. Further study is necessary to see whether the inter-speaker differences exceed intra-speaker differences in sound change.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.1005-1010
• /
• 2002

This study was carried out to investigate the effect of maltodextrin on the characteristics of low-calorie layer cake. Different levels of maltodextrin were added to the cake formula based on the weight of shortening. The specific gravity of cake batter was decreased by increasing the level of maltodextrin, whereas the viscosity showed an opposite trend. The microstructures of cake crumb observed by the scanning electron microscope showed the decrease of the number and size of air cells, and those of fat particles were also decreased by increasing the level of maltodextrin. The texture profile analysis of layer cake showed statistically significant differences according to the levels of maltodextrin. Hardness, gumminess and chewiness of the cake batter were decreased by adding maltodextrin, while springiness, cohesiveness and resilience increased. According to the sensory evaluation, the scores of taste and texture were decreased by adding maltodextrin, but the scores of appearance, color, flavor and overall preference of the layer cake increased. Overall results suggested that the addition of 35% maltodextrin could be the best replacing ratio for the low-calorie layer cake.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.723-729
• /
• 2014

When the bluetooth technology of smartphone is applied to a remote control system, communication errors caused by wave attenuation and interference results in the shortening of communication distance, loss of the target device control and malfunctioning. In this study, we propose a method to adopt a retransmission persistence controlled S/W ARQ in bluetooth communication to minimize the effect of the communication failure and to detect and handle the state where the target device gets lost control. We implemented a motor-driven RC car equpped with a bluetooth communication module and a steering application program on smartphone to test the proposed method. The experiments are conducted in three communication environments, and have resulted in the increase of the communication distance by at least 30% when S/W ARQ is applied. Moreover, when the communication was disrupted due to environmental disturbances, the S/W ARQ based system stopped immediately any undergoing operations to avoid possible malfunction.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.187-193
• /
• 2005

The TEMPO-mediated living free-radical bulk and dispersion polymerization of styrene in the presence of camphorsulfonic acid (CSA) are investigated. In the absence of TEMPO and CSA in the bulk polymerization, a conversion of $93\%$ is achieved within 6 hr of polymerization. When only TEMPO is involved in this polymerization, the pseudo-living free-radical polymerization is well achieved, however, the polymerization rate becomes quite slow. This retardation of the polymerization rate is solved by the addition of a low concentration of CSA. In the TEMPO-mediated dispersion polymerization in the presence of CSA, similar trends in the conversion, kinetics, and PDI are observed as those observed in the case of bulk polymerization. When only TEMPO is used in the dispersion polymerization, the resulting particle size becomes quite broad, due to the prolonged polymerization time. However, when a 1.0 molar ratio of CSA to TEMPO is added to the TEMPO-mediated dispersion polymerization, fairly mono-disperse PS microspheres having an average size of 5.83 $\mu$m and a CV of 3.4$\%$ are successfully obtained, due to the narrow molecular weight distribution of the intermediate oligomers and shortening of the polymerization time. This result indicates that the addition of CSA to the TEMPO-mediated bulk and the use of dispersion polymerization not only shortens the polymerization time, but also greatly improves the uniformity of the microspheres.