• The Korean Journal of Food And Nutrition
• /
• v.33 no.4
• /
• pp.440-446
• /
• 2020

The purpose of this study was to derive the conditions for manufacturing rice porridge with optimum properties after reheating. The characteristics of rice porridge according to the soaking time, water addition rate, heating temperature, heating time, and cooling conditions were compared using the 'Samkwang' cultivar. In Step I, as the heating temperature increased, the weight change decreased and the viscosity increased, and the temperature known as the main factor of the gelatinization also appeared to affect the viscosity increase. In Step II, the viscosity and the texture properties was not significantly different as the soaking time was reduced, and 10 minutes was suitable because of due to the shortening effect of the total process time. In Step III, the residual heat was lowered by cooling after the rice porridge production, so the viscosity could be greatly reduced. Also, it was confirmed that the water addition rate of 900% and the heating temperature of 15 minutes were optimal manufacturing conditions. The next study will investigate the porridge processability of rice cultivars using these results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.4
• /
• pp.80-96
• /
• 1992

This study was carried out in order to determin optimum irrigation requirements and water management practices for normal growth of dry field crops in reclaimed tidelands, and apply m planning of the irrigation projects. Desalinization experiments were performed by water management practices in the experimental field with high salt concentration, and growth experiments were conducted by irrigation point treatments using tomato and beet with relatively high salt tolerance. The results obtained from this study were summarized as follows : 1. Leaching or rinsing-leaching method was found to be effective in desalinizing the reclaimed tideland with rather high permeability. In this case, the water requirement for desalinizing the root zone layer of 40cm in depth, was estimated to be 1,200mm in depth. 2.The gypsum treatment in the desalinization of reclaimed tidelands, was ineffective in water requirements ; however, it could produce the desired effect in the facility of desalinization and the shortening of desalinization period with the sustaining permeability, in case of the desalinization by leaching method. 3.The optimum irrigation point which maintains the salt concentration within salt tolerance and maximizes the crop yield in reclaimed tidelands of silt loam soil, was found to be pF 1.6 in tomato and pF 1.8 in beet. The interval of irrigation date within 2 days was proved to he effective in both cases. 4.The optimum irrigation requirement and the water reguirement for the prevention of salt rise during the growing period after transplanting, were estimated to be 602mm(6.7mm/day) and 232mm for tomato, respectively. 5.The optimum irrigation requirement and the water requirement for the prevention of salt rise during the growing period after transplanting, were estimated to be 261mm(3.7mm/day) and 66mm for beet, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.3
• /
• pp.191-198
• /
• 2006

Priming of seeds in 150 mM KCI at $10^{\circ}C$ for 6 days was most effective in increasing germination rate and shortening germination time. Germination rate of primed seeds was increased to 96% which is about 14% higher than that of non-primed seeds. Germination temperature for better priming effects from primed onion seeds was 10 to $15^{\circ}C$ which is relatively lower than that of normal germination temperature of $20^{\circ}C$. Drying primed seeds at $20^{\circ}C$ for 5 hours resulted in best priming effects.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.3
• /
• pp.180-189
• /
• 2018

The present study was conducted to evaluate the effects of high levels of nutrients on the growth performance, blood metabolites and carcass characteristics of Hanwoo cattle. Eighteen Hanwoo steers were fed two types of diets: 1) Nine animals were fed the conventional diet including typical levels of crude protein (CP) and total digestive nutrients (TDN), and 2) Nine animals were fed the treatment diet including high levels of CP and TDN. The average body weight (BW) and dry matter intake (DMI) were greater (P < 0.05) in the treatment group than in the conventional group at early and late fattening stages. Also, in the treatment group, the average daily gain (ADG) was greater (P < 0.05) at the late fattening stage. The serum total lipid and cholesterol levels were higher (P < 0.05) in the late fattening stage of treatment group. The carcass weight, total fat weight, longissimus muscle area and the grade of meat quality were also greater (P < 0.05) in the treatment group than the conventional diet group. This study demonstrates that high levels of CP and TDN exhibit a positive effect on the growth performance and carcass characteristics, indicating that high levels of CP and TDN can be used as a cost-effective feeding program for Hanwoo cattle by shortening the feeding period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2624-2628
• /
• 2011

Exposed dose of a patient was measured by Radiophotoluminescent Glass Rod Detector with a use of a panorama graphic device in dental examination. The effect of exposed dose in optic lens was measured by comparing the different materials of the glasses. Depending on the dental location, the exposed dose distribution was 82.4~2,340uSv. It showed that the maximum difference in dose distribution was over 300%. Thus, when manufacturing the devices, it seemed to require shortening the pre-heat time and additional shielding in order to control the diagnosis and exposed dose. The measurement data of the exposed dose in optic lens was increased 20~75uSv per each test when compared putting on glasses with not wearing. As a result, taking off the glasses is recommended to improve efficiency of the test and minimize the exposed dose during dental panorama graphic examinations.

• Computers and Concrete
• /
• v.22 no.3
• /
• pp.261-267
• /
• 2018

Long-term deformation of a steel-reinforced concrete (SRC) column is different from that of a reinforced concrete (RC) column due to the different moisture distribution. Wide-flange steel in an SRC column obstructs diffusion and makes long-term deformation slower. Previous studies analyzed the characteristics of long-term deformation of SRC columns. In this study, an additional experiment is conducted to more precisely investigate the effect of wide-flange steel on the long-term deformation of SRC columns. Long-term deformation, especially creep of SRC columns with various types of wide-flange steel, is tested. Wide-flange steel for the experiment is made of thin acrylic panels that can block diffusion but does not have strength, because the main purpose of this study is to exclusively demonstrate the long-term deformation of concrete caused by moisture diffusion, not by the reinforcement ratio. Experimental results show that the long-term deformation of a SRC column develops slower than that in a RC column, and it is slower as the wide-flange steel hinders diffusion more. These experimental results can be used for analytical prediction of long-term deformation of various SRC columns. An example of the analytical prediction is provided. According to the experimental and analytical results, it is clear that a new prediction model for long-term deformation of SRC columns should be developed in further studies.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.12-17
• /
• 2008

In this paper, an I-V characteristics of bypass diode has been studied by counting the shading effect in photovoltaic module. The shadow induces hot spot phenomenon in PV module due to the increase of resistance in the current path. Two different types of PV module with and without bypass diode were fabricated to expect maximum output power with an increasing shading rate of 5 % on the solar cell. Temperature distribution is also detected by shading the whole solar cell for the outdoor test. From the result, the bypass diode works properly over 60 % of shading per cell with constant output power. Maximum power generation in case of solar cell being totally shaded with bypass diode decreases 41.3 % compared with the one under STC(Standard Test Condition). On the other hand, the maximum output power of the module without bypass diode gradually decreases by showing hot spot phenomenon with the increase of shading ratio on the cell and finally indicates 95.5 % of power loss compared with the output under STC. Finally the module temperature measured increases around $10^{\circ}C$ higher than that under STC due to hot-spots which come from the condition without bypass diode. It has been therefore one of the main reasons for degrading the PV module and shortening the durability of the PV system.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.141-165
• /
• 1997

Radiation-impaired wound healing in animal experiments was believed to be an another logical experimental model to understand the wound healing mechanism in patients. The purpose of this study was to reveal the block point which would result in impaired healing. Twenty four rats(Sprague-Dawley strains) were divided into two groups according to the time interval between irradiation and wounding. Group I, observing the healing effect on the 1st day and Group II are the healing effects on the 7th days after irradiation to the wound of the rat tongue. Experimental animals were sacrificed 3, 6, 12, and 24 hours after wounding. The specimens were examined by the light microscope and transmission electron microscope. The following results were obtained 1. Fibroblasts in both groups showed degenerative changes which were dilated mitochondria and rER, reduced microorganelle, vacuoles and little cytoplasmic process. 2. Average length between bands and Quantity of the newly produced collagen fibers around fibroblasts remained unchanged against control group. 3. The severity of degenerative change of the fibroblast and impairment of wound healing including shortening of the thickness of collagen fibers were more severe in the group II than in the group I.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.5
• /
• pp.12-20
• /
• 2015

Construction industry pays attention to modular construction recently which based on factory production not on labor intensive site production. Since modular construction has high time shortening effect and easiness of demolition and recycling, it has been applied to the temporary residential building. Domestic modular construction market are not activated yet, however, due to the high initial cost to realize modular construction. This study proposes demand-sensitized movable modular building in order to reduce the financial burden. The study compares between RC method building and Modular building which moves building when the demand falls off from Life-Cycle Cost's viewpoint. As a result of the economical evaluation, RC method achieved profits faster than Modular model, but Modular model's gross earnings during the life-cycle are much bigger than RC method. In other words, the result means that the market-sensitized movement of the modular building would be an economci choice in Life-Cycle Costing aspect.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.69-75
• /
• 2018

Efficiency of Process in manufacturing industry is a critical factor to connect directly to competitiveness of product. In particular, due to FTAs with various worlds around the world, the domestic and overseas manufacturing industries are facing intense competitions, and it requires elaborate task management system for shortening production time. This study aims at seeking how to raise efficiency of manufacturing process, using motion analysis solution. When improving the process of manufacturing after verifying optimization using motion analysis solution, it can save costs for additional process, modification, or supplement. It can also deduce practical effect to improve productivity of companies. It is expected that the study will contribute to improve wastes in the work field and task assignment efficiency, to shorten time replacing equipment, to measure standard time, and to standardize task system.