• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.74-81
• /
• 2013

The high-speed machining in the manufacturing industry field has been widely applied for parts of vehicles, aircraft, ships, electronics, etc., recently, because the effect of cost savings for shortening processing time and improving productivity is great. The purpose in this study is to investigate the effect of cutting depth on the surface roughness of workpiece with the spindle rotational speed and feed rate of high-speed machines as a parameter to find the optimal depth in the finishing for ball end mill of the aluminum alloy 7075 which is used much in aircraft parts. When the cutting depth for the respective feed rate and spindle rotational speed is varied from 0.1 mm to 0.7 mm at intervals of 0.2 mm in the wet finishing of the aluminum alloy 7075 by the insoluble cutting oils and high-speed machining used in the rough machining of previous study, the surface roughness values and the cutting temperature are measured. In addition, the cutting surface shapes of test specimens are observed by optical microscope and compared with respectively. It is found that the surface roughness values and the temperature generated during machining are increased as the feed rate and cutting depth are raised, but those are decreased as the spindle rotational speed is increased.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.21 no.1
• /
• pp.5-11
• /
• 2015

Background: The purpose of this study was to investigate the effects of Mulligan's straight leg raise with traction technique and hold-relax technique on flexibility of hamstring in people with shortened hamstring. Methods: Thirty two subjects participated in this study. The subjects were assigned to either the Mulligan's straight leg raise with traction technique group (n=16) or the hold-relax technique group (n=16). 90-90 straight leg raise test was performed for evaluation of hamstring shortening at initial time of study. After intervention, immediate effect (immediately after intervention) and lasted effect (60 min after intervention) were assessed. Results: In the both Mulligan's straight leg raise with traction technique and hold-relax technique groups, significant improvements on flexibility of hamstring was observed in immediately and 60 minute after intervention (p<.05). However, there are no significant difference was observed between groups (p>.05). Conclusion: In the results of this study, both Mulligan's straight leg raise with traction technique and hold-relax technique show immediately and 60 minute after evaluation effectiveness in flexibility of hamstring of people with shortened hamstring. In addition, although the difference is not statistically significant, Mulligan's straight leg raise with traction technique was more increased average extension angle of knee joint at 90-90 straight leg raise test than the hold-relax technique.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.316-322
• /
• 2001

Chemotherapy and radiotherapy used on pediatric oncology patients often causes dentofacial anomalies. Defects noted include tooth and root agenesis, root thinning, root shortening, localized enamel defect and maxillofacial underdevelopment. The effect of radiotherapy usually is confined to the radiation site but the effect of chemotherapy may be more wide spread becuase of its systemic distribution. Many pediatric cancers are treated with a combination of radiation and multiagent chemotherapy. Dental treatment affected by chemotherapy and radiation therapy damage to developing teeth and maxilloface includes retention of teeth, space maintenance, prosthetic considerations, requirements for oral hygiene. The following case related to multiple rootless teeth.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.4
• /
• pp.1879-1888
• /
• 2019

Background: The treatment of pain in the iliotibial band friction syndrome has been difficult to determine, according to studies to date. However, recent studies have suggested that flexibility in the subacute stage of pain in the iliotibial band friction syndrome may help reduce pain. Objective: To investigate the immediate effect on pressure pain threshold and flexibility of the tensor fascia latae and iliotibial band by applying static and dynamic myofascial release foam rolling and self-stretching to adults with shortening iliotibial band. Design: Randomized controlled trial Methods: In this study, 50 subjects who were selected in advance as a randomized controlled trial were randomly allocated using a R Studio program. The included subjects were randomly allocated to three intervention groups. The static self-myofascial release 18 people, dynamic self-myofascial release group 16 people separated the self-stretching group 16 people and conducted a homogeneity check in advance. Before the start of the experiment, after of the experiment, 5 minutes after the end of the experiment, the pressure pain threshold and flexibility change for each part were measured. Results: The results of this study showed that the static self-myofascial release showed a significant difference in the pressure pain threshold in the tensor fascia latae and middle, lower part of the iliotibial band, compared with the other intervention groups (p<.05). In change of flexibility, the static self-myofascial release was significantly different than the other intervention groups (p<.05). Conclusion: The result of this study suggest that static self-myofascial release using foam roller may help to improve the pain and flexibility of the iliotibial band and to apply it as a more discerning intervention.

• Corrosion Science and Technology
• /
• v.20 no.5
• /
• pp.308-314
• /
• 2021

Neutron dose level at bottom head of a reactor pressure vessel (RPV) was calculated using reactor vessel neutron transport for a Korean nuclear power plant A. At 34 EFPY with a 40-year (2042) design life after plating repair, irradiation fast neutron effect was 6.6x10¹⁵ n/cm². As helium(He) gas can be generated by Ni only at 1/10⁶ level of 5 × 10²¹ n/cm², He generation possibility in the Ni plating layer is very little during 40 years of operation (2042, 34 EFPY). Thermal neutrons can significantly affect the generation of He from Ni metal. At 10 years after a repair, He can be generated at a level of about 0.06 appm, a level that can add general welding repair without any consideration. After 40 years of repair, 9.8 appm of He may be generated. Although this is a rather high value, it is within the range of 0.1 to 10 appm when welding repair can be applied. Clad repair by Ni electroplating technology is expected to greatly improve the operation efficiency by improving the safety and shortening the maintenance period of the nuclear power plant.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.2
• /
• pp.75-81
• /
• 2018

Background: The purpose of this study was to investigate the effect of various relaxation techniques on various dysfunction problems caused by shortening of the sagittal muscles. Method: The subjects were 44(18 males, 26 females). The subjects were composed of 3 groups. The experimental group consisted of 14 patients with proprioceptive neuromuscular facilitation stretching (PNF) technique, control group A 15 patients with self myofacial release (SMR) ball exercise, and control group B with 15 patients with Sling exercise. After 3 weeks of relaxation on the hamstring muscle, the length of the hamstring muscle before and after the intervention was compared. Results: The results of relaxation exercise of the snake muscles applied to passive PNF group, SMR ball group, and Sling relaxation group are as follows. 1. In the passive PNF group, the muscle length of the hamstring muscle was significantly increased after the intervention. 2. The muscle length of the hamstring muscle was significantly increased after the intervention in the SMR ball group. 3. Sling relaxation group significantly increased the muscle length of the hamstring muscle after sling exercise intervention. 4. Passive PNF group showed the greatest change in muscle length before and after intervention than SMR ball group and Sling relaxation group. Conclusion: Passive PNF relaxation therapy, SMR ball relaxation therapy, and Sling relaxation therapy applied to the hamstring muscle were effective in increasing muscle length of the hamstring muscle. PNF relaxation therapy showed the most significant effect after 3 weeks intervention.

• Steel and Composite Structures
• /
• v.38 no.2
• /
• pp.121-139
• /
• 2021

Ultra-high strength concrete (UHSC) encased steel columns are receiving growing interest in high-rise buildings owing to their economic and architectural advantages. However, UHSC encased steel columns are not covered by the modern fire safety design code. A total of 14 fire tests are conducted on UHSC (120 MPa) encased steel columns under constant axial loads and exposed to ISO-834 standard fire. The effect of load ratio, slenderness, stirrup spacing, cross-section size and concrete cover to core steel on the fire resistance and failure mode of the specimens are investigated. The applicability of the tabulated method in EC4 (EN 1994-1-2-2005) and regression formula in Chinese code (DBJ/T 15-81-2011) to fire resistance of UHSC encased steel columns are checked. Generally, the test results reveal that the vertical displacement-heating time curves can be divided into two phases, i.e. thermal expansion and shortening to failure. It is found that the fire resistance of column specimens increases with the increase of the cross-section size and concrete cover to core steel, but decreases with the increase of the load ratio and slenderness. The EC4 method overestimates the fire resistance up to 186% (220 min), while the Chinese code underestimates it down to 49%. The Chinese code has a better agreement than EC4 with the test results since the former considers the effect of the load ratio, slenderness, cross section size directly in its empirical formula. To estimate the fire resistance precisely can improve the economy of structural fire design of ultra-high strength concrete encased steel columns.

• Steel and Composite Structures
• /
• v.42 no.4
• /
• pp.513-538
• /
• 2022

This paper reports on experiments addressing the buckling and collapse behavior of an innovative built-up cold-formed steel (CFS) columns. The built-up column consists of four individual CFS lipped channels, two of them placed back-to-back at the web using two self-drilling screw fasteners at specified spacing along the column length, while the other two channels were connected flange-to-flange using one self-drilling screw fastener at specified spacing along the column length. In total, 12 experimental tests are reported, covering a wide range of column lengths from stub to slender columns. The initial geometric imperfections and material properties were determined for all test specimens. The effect of screw spacing, load-versus axial shortening behaviour and buckling modes for different lengths and screw spacing were investigated. Nonlinear finite element (FE) models were also developed, which included material nonlinearities and initial geometric imperfections. The FE models were validated against the experimental results, both in terms of axial capacity and failure modes of built-up CFS columns. Furthermore, using the validated FE models, a parametric study was conducted which comprises 324 models to investigate the effect of screw fastener spacing, thicknesses and wide range of lengths on axial capacity of back-to-back and flange-to-flange built-up CFS channel sections. Using both the experimental and FE results, it is shown that design in accordance with the American Iron and Steel Institute (AISI) and Australia/New Zealand (AS/NZS) standards is slightly conservative by 6% on average, while determining the axial capacity of back-to-back and flange-to-flange built-up CFS channel sections.

• Journal of Korean Physical Therapy Science
• /
• v.31 no.3
• /
• pp.66-77
• /
• 2024

Background: The purpose of this study was to determine the effects of insoles on the plantar pressure distribution during squat exercise in subjects with calf muscle shortness. Design: Cross-sectional Study Methods: Thirty subjects were participated in each fifteen subjects of a control group and an experimental group with calf muscle shortness. The participants were allocated in control group or experimental group according to knee-to-wall test. They were asked to perform squat exercise at hip flexion angle of 20° and knee flexion angle of 45° across three conditions with insole(2.0cm and 3.5cm) and without insole. The plantar pressure distribution was measured using Pedoscan equipment. In order to find out whether there is a significant difference in the plantar pressure distribution between the groups and the height, the two-way mixed ANOVA test was used and the statistical significance level was .05. Results: As a result of the study, the plantar pressure distribution between the group and the height showed a significant interaction effect(p<.001). There was no significant difference according to the insole height of 2.0cm and 3.5cm in all the control groups and the experimental group. Conclusion: We found that the plantar pressure distribution shifted backward during squat exercise by wearing the insole to subjects with shortening of the calf muscle. We suggest that wearing an appropriate height of insole may change the plantar pressure distribution during squat exercise in subjects with calf muscle shortness.

• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.115-125
• /
• 2014

With Single Comb White Leghorn (WL) and Korean Native Chicken (KNC) breeds, we compared the stress response with chicken breeds that were subjected to a high stocking density. Stress response was analyzed by the quantity of telomeric DNA, the rate of DNA damage and the expression levels of heat shock proteins (HSPs) and hydroxyl-3-methyl-glutaryl coenzyme A reductase (HMGCR) genes on tissues and blood. The telomere length and telomere shortening rates were analyzed by quantitative fluorescence in situ hybridization on the nuclei of lymphocytes and tissues. The DNA damage rate of lymphocytes was quantified by the comet assay. The expression levels of HSP70, HSP90-${\alpha}$, HSP90-${\beta}$ and HMGCR genes were measured by quantitative real-time polymerase chain reaction in lymphocytes. There was no significant difference between KNC and WL in body weight, weight gain, telomere shortening rate and DNA damage rate. However, the growth rate significantly decreased in chickens raised under high stocking density conditions, as compared to the control group. The telomere-shortening rate, DNA damage and HSPs expression of the lymphocytes were significantly higher in the high stocking density group than the control. The stress condition and breeds had a significant effect on the expressions of HSP70, HSP90-${\alpha}$ and HSP90-${\beta}$ in lymphocytes, except HMGCR. The stress response of WL was higher than that of KNC, as analyzed to the expression of HSP70 and HSP90-${\alpha}$. Therefore, we concluded that the chickens which were exposed to a high stocking density had increased the individual physiological stress response regardless of breeds, and White Leghorns are more susceptible to stress condition than Korean Native Chickens.