• 한국컴퓨터정보학회논문지
• /
• 제24권7호
• /
• pp.31-37
• /
• 2019

Citation-based article summarization is to create a shortened text for an academic article, reflecting the content of citing sentences which contain other's thoughts about the target article to be summarized. To deal with the problem, this study introduces an extractive summarization method based on calculating a linear combination of various sentence salience scores, which represent the degrees to which a candidate sentence reflects the content of author's abstract text, reader's citing text, and the target article to be summarized. In the current study, salience scores are obtained by computing surface-level textual similarities. Experiments using CL-SciSumm datasets show that the proposed method parallels or outperforms the previous approaches in ROUGE evaluations against SciSumm-2017 human summaries and SciSumm-2016/2017 community summaries.

• 한국작물학회지
• /
• 제12권
• /
• pp.71-75
• /
• 1972

본 실험은 성숙촉진제 C.E.P.A(2-chloroethyl phosphonic acid)를 처리하여 잎담배 성숙촉진 여부와 나아가서 수량 및 품질에 미치는 영향을 검토코저 1970-1971년 양년에 걸쳐 소사시험장 및 산지적응시험을 시도한 바 그 결과를 요약하면 다음과 같다. 1. 농도가 높을수록 잎담배 성숙을 촉진시키는 정도가 현저하며 그 효과는 처리후 3-4일부터 나타났다. 2. 열 표면에만 처리해도 효과가 있었으며 성숙촉진 효과는 처리 부분에만 뚜렷하였다. 3. C.E.P.A 처리 효과는 성숙기에 가까운 하위엽에서 뚜렷했고 상위엽에서는 완만하였고 성숙 정도에 따라 차이가 현저하였다. 4. C.E.P.A는 농도가 높을수록 성숙충족효과는 크지마는 900ppm 이상이 되면 잎의 신전율이 떨어져서 약간이나마 감수가 되며 3,000ppm에서는 약 9%의 수량 감을 가져 오므로 적정농도는 900ppm으로 볼 수 있다. 5. C.E.P.A의 성숙충족 일수를 보면 100ppm에서 1일, 300ppm 3일, 450ppm 3일, 900ppm 4일, 3000ppm에서 약 7일간 단축시킬 수가 있었다. 6. 건조 경과를 보면 C.E.P.A처리구는 무처리에 비하여 시간으로 약 29%의 건조시간과 45%의 연료를 절감할 수 있는 가능성이 엿보인다. 7. 그러므로 잎담배 재배에 있어 C.E.P.A를 적정농도(900ppm)로 처리하면 수량의 감소를 가져 오지 않으면서 품질에서 13.5% 수납대금에서 12%의 소득을 증대시킬 수 있으며 부수적인 효과로서 3,000ppm에 약 7일, 건조시간에서 약24시간을 단축시킬 수 있다고 본다.

• 한국화재소방학회논문지
• /
• 제30권6호
• /
• pp.99-104
• /
• 2016

본 논문에서는 동식물시설 중 전기화재 비율이 높은 우사, 계사, 돈사에서 먼지샘플을 채취하여 증류수에 희석시킨 후 이 물의 저항률을 측정하고, 저항률에 따른 물의 온도변화 및 전류 측정실험, 트래킹 재현실험을 통해 축사별로 먼지에 따른 트래킹화재 위험성을 분석하였다. 분석결과 저항률 수치는 우사, 계사, 돈사 순으로 돈사가 가장 낮게 측정되었으며, 축사별 평균 값 역시 우사, 계사, 돈사 순으로 돈사가 가장 낮게 나타났다. 온도변화 및 전류 측정실험에서는 저항률이 낮을수록 물의 온도변화가 큰 경향을 보였으며, 전류 실효값 역시 높게 나타났다. 트래킹 재현실험에서도 저항률이 낮을수록 트래킹 진전속도가 빠르게 진행되었으며 착화시간이 단축되었다. 실험결과를 통해 도출된 결과를 가지고 축사별 먼지 저항률이 다른 이유를 고찰하였다.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.1-7
• /
• 2009

Use of the PV(photovoltaic) generation system is increased in such areas as remote mountain places or islands at which electrical energy is not serviced. The stand alone PV system is required the power storage products such as battery, fly wheel and super capacitor. Several lead storage batteries are connected in series to get high voltages. The life of lead storage battery is shortened when over charge or over discharge takes place. So, it is needed to control batteries not to be overcharged or be discharged deeply. Voltage of each battery was ignored in former control methods in which overall voltage was used to control charge or discharge battery. In this study, the charging and discharging voltage variations of sealed lead storage batteries with l2V/l.2A were investigated step by step experiments. The results of the test show that one should consider and specify the state of each battery to prevent overcharge or deep discharge. With the basis of the experiments, we designed a monitoring unit to monitor battery voltages simultaneously using micro-controller. The unit measures voltage of 20 batteries simultaneously and displays data on the color LCD monitor with curved line graph. It also sends data to PC using the RS232C communication port. The designed unit was adapted to stand alone PV system with 1kW capacity and lead storage batteries are connected to the PV generation system. The number of lead storage batteries was 10 in series and 12V/250Ah each. Resistive load with 3kW was used for discharging.

• 폴리머
• /
• 제37권2호
• /
• pp.240-248
• /
• 2013

본 연구에서는 DGEBA(diglycidyl ether of bisphenol A)를 사용한 에폭시/mercaptan 경화제의 경화 반응 거동을 에폭시/아민 유도체형 경화제와 비교하여 연구하였다. 경화 반응 거동은 DSC 분석에 의해 승온 및 등온의 조건에서 경화되는 과정을 연구하였다. DSC의 승온 실험에서는 Kissinger 법을 이용하였으며, 등온 실험에서는 Kamal의 속도모델을 이용하여 분석하였다. 결과적으로 활성화 에너지는 아민 유도체형 경화제를 사용하였을 때 약 40 kcal/mol이고, mercaptan 경화제를 사용하였을 때 약 28에서 19 kcal/mol로 -SH 관능기가 증가할수록 감소하였다. 에폭시/아민 유도체형 경화제는 약 $90^{\circ}C$ 이상에서 경화 반응이 개시되는 반면, 에폭시/mercaptan 경화제에서는 경화 반응 개시 온도가 약 $80^{\circ}C$ 이내로 낮아지고, 반응 속도가 상승하여 반응 시간이 10분 이내로 단축되었다. 또한 에폭시/mercaptan 경화제계는 자기 촉매 반응 모델을 따르는 것을 확인하였고 약 20~40%의 경화도에서 최대 반응속도를 나타내었다.

• Journal of Astronomy and Space Sciences
• /
• 제27권1호
• /
• pp.43-54
• /
• 2010

This study was performed by the policy research project of Ministry of Land, Transport and Maritime Affairs, which title is "Developing safety standards and management of space radiation on the polar route". In this research, total six experiments were performed using Korean commercial flights (B747). Three of those are on the polar route and the other three are on the north pacific route. Space radiation exposure measured on the polar route is the average 84.7 uSv. The simulation result using CARI-6M program gives 84.9 uSv, which is very similar to measured value. For the departure flight using the north pacific route, the measured space radiation is the average 74.4 uSv. It seems that is not so different to use the polar route or not for the return flight because the higher latitude effect causing the increase of space radiation is compensated by the shortened flight time effect causing decreasing space radiation exposure.

• 한국산학기술학회논문지
• /
• 제4권2호
• /
• pp.114-119
• /
• 2003

본 연구는 폐수로부터 몇 가지의 유기오염물(Phenol, 2-Chlorophenol, Nitrobenzene)을 비분산 용매추출법으로 동시 제거하는 실험이다. 몇 가지의 용매(MIBK, IPAc, Hexane)에 대하여 분배계수를 구하였고, 용매와 폐수사이의 향류와 병류 흐름에 의한 추출 실험을 하였다. 수용액상의 유량이 증가함에 따라 용매와의 접촉시간이 짧아져 제거율이 떨어지고, 용매의 유량이 증가함에 따라 제거율이 증가함을 알 수 있었다. 그리고 병류보다는 향류에서 유기오염물의 제거율이 증가하는 것을 알 수 있었다. 이러한 결과를 토대로 유기오염물만이 아닌 다른 중금속 오염물 둥도 처리할 수 있는 산업용 폐수처리장치의 개발을 위한 기초자료로 쓰일 수 있다.

• Industrial Engineering and Management Systems
• /
• 제7권2호
• /
• pp.160-170
• /
• 2008

This paper proposes a mathematical model for converting conveyor assembly line to cellular manufacturing in complex production environments. Complex production environments refer to the situations with multi-products, variant demand, different batch sizes and the worker abilities varying with work stations and products respectively. The model proposed in this paper aims to determine (1) how many cells should be formatted; (2) how many workers should be assigned in each cell; (3) and how many workers should be rested in shortened conveyor line when a conveyor assembly line should be converted, in order to optimize system performances which are defined as the total throughput time and total labor power. We refer the model to a new production system. Such model can be used as an evaluation tool in the cases of (i) when a company wants to change its production system (usually a belt conveyor line) to a new one (including cell manufacturing); (ii) when a company wants to evaluate the performance of its converted system. Simulation experiments based on the data collected from the previous documents are used to estimate the marginal impact that each factor change has had on the estimated performance improvement resulting from the conversion.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.37-44
• /
• 2018

Purpose: The objective of this study was to investigate the high-efficiency anaerobic digestion of organic wastes with high fat content. Specifically, the analysis focused on biogas production performance with a focus on carbon number and the double bond count of the long-chain fatty acids (LCFAs), which are hydrolysis products of triglycerides. Methods: Experiments were performed under mesophilic anaerobic conditions with a feed-to-microorganism ratio (F/M) of 1.0. Biogas production performance was analyzed through biogas production patterns, lag-phase, and the time required for 90% biogas production (T90). Results: Biogas production increased when the content of unsaturated LCFAs (containing relatively large numbers of carbon atoms) increased. In substrate containing LCFAs with four or more double bonds, although the initial lag-phase in biogas production was shortened, development of a three-step lag-phase resulted in decreased biogas production. These results suggest that high rates of anaerobic digestion are possible when the LCFAs have high unsaturated fatty acid content with three or fewer double bonds. Conclusions: When various types of LCFAs are digested anaerobically, biogas production performance can be improved if the unsaturated fatty acid content and number of double bonds are optimized for maximum production.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.11-22
• /
• 2016

Clock skew scheduling is one of the essential steps to be carefully performed during the design process. This work addresses the clock skew optimization problem integrated with the consideration of the inter-dependent relation between the setup and hold times, and clock to-Q delay of flip-flops, so that the time margin is more accurately and reliably set aside over that of the previous methods, which have never taken the integrated problem into account. Precisely, based on an accurate flexible model of setup time, hold time, and clock-to-Q delay, we propose a stepwise clock skew scheduling technique in which at each iteration, the worst slack of setup and hold times is systematically and incrementally relaxed to maximally extend the time margin. The effectiveness of the proposed method is shown through experiments with benchmark circuits, demonstrating that our method relaxes the worst slack of circuits, so that the clock period ($T_{clk}$) is shortened by 4.2% on average, namely the clock speed is improved from 369 MHz~2.23 GHz to 385 MHz~2.33 GHz with no time violation. In addition, it reduces the total numbers of setup and hold time violations by 27.7%, 9.5%, and 6.7% when the clock periods are set to 95%, 90%, and 85% of the value of Tclk, respectively.