• Korean Management Science Review
• /
• v.30 no.3
• /
• pp.71-79
• /
• 2013

This paper investigates and selects the areas that need to be improved in R&D and production management of small and medium size companies. The study on the capability of R&D and production management shows that the areas for evaluating of the R&D and production management levels are composed of 8 elements : R&D resource, R&D support and experience, long-term operations strategy, intermediate range planning, short-term planning, subcontractor management, logistics and inventory management, and quality management. The investigation of the gap between the importance of the areas and the capability of SMEs shows that the most important things are to consolidate supply chain, to improve product and process competitiveness using quality improvement, and to enhance production management through sophisticated short-term planning. The detailed analysis also shows that the areas that need to be improved depend on the size and sales of the company.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.62-66
• /
• 1997

This paper is presented to short-term load forecast algorithm using weekday change ratio. The week periodicity was excluded from weekday change ratio. That was composed with the power demand forecast term of five and multiple regression model of the three form. The precision was good with 2.8[%]. Also the power demand of special day(weekend) of completely difficult forecast case of using the multiple regression model was able to forecast at this paper. Therefore, the forecast precision was enhanced and the reliable forecast model was constructed.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.35-40
• /
• 2000

The influence of cyclic loading history on the creep behavior of the 30 vol% hot-pressed $SiC_f/Si_3N_4copmposite was experimentally investigated at $1200^{\circ}C$. The duration of loading/unloading had great effects on the creep behaviors. The short term duration cyclic loading history test results showed significant reduction in the primary and steady-state creep rates. For example, 300sec loading/300sec unloading history resulted in 70% lower steady-state creep rate than that of the continuous loading. However the long term duration cyclic loading history test results showed little change in creep rates compared to those of the continuous one. The reason for the significant change in the short term duration cycles was estimated due to the change in the stress redistribution between the fiber and matrix during the creep recovery in the primary stage.

• International Commerce and Information Review
• /
• v.7 no.4
• /
• pp.367-386
• /
• 2005

The purpose of this is to analyze environment of foreign direct investment and Act in Korea and to find invitation and extension of foreign direct investment into Korea. Investment incentives, simplification of investment procedures, image improvement, increased public relations and investment support services are all factors which can be enhanced in the short term to positively influence investors decision-making in where to invest. Since the enactment of the Foreign Investment Promotion Act in November of 1998, there has been a signification improvement in Korea's investment environment in terms of policies and systems. It is expected that the foreign direct investment environment in Korea will continue to improve through the improvement in political stability, labor-management relations and easing of political tensions between the North and South, in the long term, as well as through improvements in investment incentives, investment procedures and public relations activities, in the short term.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1285-1289
• /
• 2004

Elman Discrete Recurrent Neural Networks Model(EDRNNM) was used to be a suitable short-term hydrological forecasting tool yielding a very high degree of flood stage forecasting accuracy at Musung station of Wi-stream one of IHP representative basins in South Korea. A relative new approach method has recurrent feedback nodes and virtual small memory in the structure. EDRNNM was trained by using two algorithms, namely, LMBP and RBP The model parameters, optimal connection weights and biases, were estimated during training procedure. They were applied to evaluate model validation. Sensitivity analysis test was also performed to account for the uncertainty of input nodes information. The sensitivity analysis approach could suggest a reduction of one from five initially chosen input nodes. Because the uncertainty of input nodes information always result in uncertainty in model results, it can help to reduce the uncertainty of EDRNNM application and management in small catchment.

• Journal of Contemporary Eastern Asia
• /
• v.15 no.2
• /
• pp.177-190
• /
• 2016

One of the main objectives of this paper is to provide insight to understand the effect of natural disasters on local government finance. That is, to analyze local governments' sales tax revenues after Hurricane Ike. Three Texas cities are examined: League City, Pearland, and Sugarland. Based on data collected from the Texas Comptroller's Office and the US Census, we found local governments experience a short-term increase in sales tax revenues and a long-term decline after the hurricane strike the region. On average, a major hurricane has a two-year impact on local government economy. The findings are essential for practitioners because in order to have a prosperous recovery after natural disasters, public managers have to prepare financially for short term changes in their sales tax revenues.

• Structural Engineering and Mechanics
• /
• v.62 no.4
• /
• pp.477-485
• /
• 2017

The structural designs of RC flat plates that have no flexural stiffness by boundary beams may be governed not by strength conditions but by serviceabilities. Specially, since over-loading and tensile cracking in early-aged slabs significantly increase the short- and long-term deflections of a flat plate system, a construction sequence and its impact on the slab deflections may be decisive factors in designs of flat plate systems. In this study, the procedure of simulating slab deflections with considering construction sequences, concrete cracking, and long-term effects is proposed. The proposed method is practically useful, as it can predict well the slab deflections at construction and service stages only with a few input data. The proposed method is verified by comparisons with measured results in a real-scale test.

• Nuclear Engineering and Technology
• /
• v.47 no.6
• /
• pp.719-728
• /
• 2015

Following the Fukushima accident, a special safety inspection was conducted in Korea. The inspection results show that Korean nuclear power plants have no imminent risk for expected maximum potential earthquake or coastal flooding. However long- and short-term safety improvements do need to be implemented. One of the measures to increase the mitigation capability during a prolonged station blackout (SBO) accident is installing injection flow paths to provide emergency cooling water of external sources using fire engines to the steam generators or reactor cooling systems. This paper illustrates an evaluation of the effectiveness of external cooling water injection strategies using fire trucks during a potential extended SBO accident in a 1,000 MWe pressurized water reactor. With regard to the effectiveness of external cooling water injection strategies using fire engines, the strategies are judged to be very feasible for a long-term SBO, but are not likely to be effective for a short-term SBO.

• Journal of Korean Institute of Industrial Engineers
• /
• v.15 no.1
• /
• pp.65-75
• /
• 1989

This study complements the previous studies on workload distribution problems in Flexible Manufacturing Systems. Specifically, we consider the problem in two perspectives, the long-range policy and the short and medium-term planning and control. The long-term loading policy focusses on identifying the optimal loading of the system characterized by either balanced loading or unique unbalanced loading for which a steepest ascent method is developed. These results are then applied to study the optimal medium and short-term planning and control problems, for which a truncated dynamic programming method is developed in order to obtain the optimal allocation of the given operation mix of part types to work stations.

• Journal of Gastric Cancer
• /
• v.20 no.4
• /
• pp.345-354
• /
• 2020

Early detection of gastric cancer is crucial because the survival rate can be improved through curative treatment. Although surgery and gastrectomy with lymph node dissection remain as the gold standard for curative treatment, early gastric cancer (EGC) with negligible risk of lymph node metastasis can be treated with endoscopic resection (ER), such as endoscopic submucosal dissection. Among gastric cancers, undifferentiated-type cancer is distinguished from differentiated-type cancer in various aspects in terms of clinical features and pathophysiology. The undifferentiated-type cancer is also known to be associated with an aggressive behavior and a poor prognosis. Therefore, the indication of ER for undifferentiated EGC is limited compared with differentiated-type. Recent studies have reported that ER for undifferentiated EGC is safe and shows favorable short- and long-term outcomes. However, it is necessary to understand the details of the research results and to selectively accept them. In this review, we aimed to evaluate the current practice guidelines and the short-term and long-term outcomes of ER for undifferentiated type EGC.