• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.423-431
• /
• 2022

The UPS(Uninterruptible Power Supply) system operates in the battery charging mode when the grid is normal, and in the UPS mode, which is the battery discharge mode when a grid error occurs. Since the UPS must supply the same voltage as the grid to the load within 4 [ms] in case of a grid error, the switching time and power recovery time should be short when controlling the output voltage and current of the UPS, and the power failure detection time is also important. The power outage detection algorithm using DFT(Discrete Fourier Transform) proposed in this paper compares the grid voltage waveform with the voltage waveform including the 9th harmonic generated through DFT using Schmitt trigger to detect power outage faster than the existing power outage monitoring algorithm. There are advantages. Therefore, it is possible to supply instant and stable power when switching modes in the UPS system. The multi-power-applied UPS system proposed in this paper uses DFT, which is faster than the conventional blackout monitoring algorithm in detecting power failure, to provide stable power to the load in a shorter time than the existing power outage monitoring algorithm when a system error occurs. The detection method was applied. The changeover time of mode switching was set to less than 4 [ms], which is 1/4 of the system cycle, in accordance with KSC 4310 regulation, which was established by the Industrial Standards Council on the regulation of uninterruptible power supply. A 10 [kW] UPS system in which commercial voltage, vehicle generator, and auxiliary diesel generator can be connected to each of the proposed transfer devices was constructed and the feasibility was verified by conducting an experiment.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.87-92
• /
• 2001

In this studies, joint time-frequency analysis techniques were applied to analyze ultrasonic signals in the degraded austenitic 316 stainless steels, to study the evolution of damage in these materials. It was demonstrated that the nonstationary characteristics of ultrasonic signals could be analyzed effectively by these methods. The WVD was more effective for analyzing the attenuation and frequency characteristics of the degraded materials through ultrasonic. It is indicated that the joint time-frequency analysis, WVD method, should also be useful in evaluating various damages and defects in structural members.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권7호
• /
• pp.332-338
• /
• 2005

PD(Partial Discharge) signal emitted from PD sources has their intrinsic features in the region of time and frequency STFT(Short Time Fourier Transform) shows time-frequency distribution at the same time. 2-Dimensional matrices(33$\times$77) from STFT for PD pulse signals are a good feature vectors and can be decreased in dimension by wavelet 2D data compression technique. Decreased feature vectors(13$\times$24) were used as inputs of Back-propagation ANN(Artificial Neural Network) for discrimination of Multi-PD sources(air discharge sources(3), surface discharge(1)). They are a good feature vectors for discriminating Multi-PD sources in the air.

• Structural Engineering and Mechanics
• /
• 제66권2호
• /
• pp.185-193
• /
• 2018

In this study, low- and high-frequency structure behaviors were identified and a systematic analysis procedure was proposed using noisy GPS data from a 165-m-high tower in ${\dot{I}}stanbul$, Turkey. The raw GPS data contained long- and short-periodic position changes and noisy signals at different frequencies. To extract the significant results from this complex dataset, the general structure and components of the GPS signal were modeled and analyzed in the time and frequency domains. Uncontrolled jumps and deviations involving the signal in the time domain were pre-filtered. Then, the signal was converted to the frequency domain after applying low- and high-pass filters, and the frequency and periodic component values were calculated. The spectrum of the tower motion obtained from the filtered GPS data had dominant peaks at a low frequency of $1.15572{\times}10-4Hz$ and a high frequency of 0.16624 Hz, consistent with two equivalent GPS datasets. Then, the signal was reconstructed using inverse Fourier transform with the dominant low frequency values to obtain filtered and interpretable clean signals. With the proposed sequence, processing of noisy data collected from the GPS receivers mounted very close to the structure is effective in revealing the basic behaviors and features of buildings.

• 한국광학회지
• /
• 제19권1호
• /
• pp.1-8
• /
• 2008

샥-하트만(Shack-Hartmann) 파면 측정 센서는 여러 분야에서 다양하게 사용되고 있다. 특히 적응광학은 주요 응용분야 중 하나이다. 적응광학 시스템은 실시간으로 빠르게 동작되어야 하므로 고속 파면 측정이 필수적이다. 고속 파면 측정에서는 카메라의 노출시간이 매우 작기 때문에 파면 측정시에 광자 잡음(photon noise)와 판독 잡음(readout noise)등의 잡음의 영향을 크게 받는다. 따라서 잡음에 둔감한 고속 중심점 탐색 알고리즘이 요구된다. 본 논문에서는 잡음에 둔감한 고속 중심점 탐색 알고리즘으로 다중 해상도 상관관계법이 제안되었다. 이 방법은 고속 푸리에 변환(fast Fourier transform)을 이용한 상관관계법과 비교하여 다중 해상도 이미지를 이용함으로써 계산시간을 향상시켰다. 본 논문에서는 무게중심법(center of mass method)과 상관관계법(correlation method)과 다중해상도 상관관계법(multi-resolution correlation method)의 계산시간과 측정 정확도를 비교하기 위해 전산모사 방법이 사용되었다. 제안된 방법의 정확도는 기존의 상관관계법과 유사한 것을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.524-527
• /
• 2005

최근, 사회는 고도의 디지털 정보화 시대로 급속히 발전하고 있다. 그러나 여전히 신호를 처리하는 과정에서 여러 가지 원인에 의해 잡음이 발생하고 있으며, 이러한 잡음들을 제거하기 위한 다양한 방법들이 연구되고 있다. 잡음을 제거하기 위해 기존에 FFT와 STFT 등이 있었으나, 신호에 대한 시간정보를 알 수 없고 시간-주파수 국부성이 상충관계를 갖는다. 따라서 이러한 한계를 극복하기 위해, 다중해상도 해석이 가능한 웨이브렛기반의 잡음 제거 기법들이 신호처리 분야에서 응용되고 있다. 그러나 threshold와 상관관계를 이용한 잡음 제거 방법은 잡음의 통계적 특징만을 반영함에 따라, 많은 잡음들이 edge로써 판단될 수 있으며, AWGN과 임펄스 잡음을 동시에 제거하기 위한 방법을 제공하지 않는다. 따라서 본 논문에서는 웨이브렛기반의 새로운 잡음 제거 방법을 제시하여, 기존의 방법들과 비교하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.1108-1109
• /
• 2023

본 논문은 선박 내부 소음을 효과적으로 감소시키기 위한 ANC(Active Noise Cancellation)및 인공 지능 (AI) 결합 시스템의 개발과 적용에 관한 연구를 다룬다. 선박 환경에서의 소음은 승원의 스트레스 증가와 불편을 초래하므로, 이를 해결하기 위한 방법을 제안하고자 한다. 외부 소음과 내부 소음 데이터를 수집하고, STFT(Short-Time Fourier Transform)알고리즘을 통해 소음 데이터를 분석 가능한 형태로 전처리한다. 그 후, LSTM(Long Short-Term Memory)알고리즘을 사용하여 선박 외부에서 발생한 소음을 입력으로 받아 내부에서 들리는 외부 소음을 예측하고 제어하는 모델을 훈련시킨다. 이후 최적화 과정을 거쳐 예측 소음의 반대 파형을 생성 및 출력을 통해 ANC 를 구현한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1784-1786
• /
• 2004

PD(Partial Discharge) signal emitted from PD sources has their intrinsic features in the region of time and frequency. STFT(Short Time Fourier Transform) shows time-frequency distribution at the same time. 2-Dimensional matrices(33${\times}$77) from STFT for PD pulse signals are a good feature vectors and can be decreased in dimension by wavelet 2D data compression technique. Decreased feature vectors(13${\times}$24) were used as inputs of Back-propagation ANN(Artificial Neural Network) for discrimination of Multi-PD sources(air discharge sources(3), surface discharge(1)). They are a good feature vectors for discriminating Multi-PD sources.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1397-1402
• /
• 2008

In this paper, damage detection method by using the time reversal is developed to detect damage on composit structures. The time reversal was investigated for direct root between PZT and PZT, but in case of a circular PZT, lamb wave moves not only along the direct root but also another roots. The center frequency of lamb wave is kept when the lamb waves are reflected from damage. This paper presents experimental and theoretical results for the new structural health monitoring method by above features of lamb wave, and we can increase accuracy of the new structural health monitoring method by using STFT(Short Time Fourier Transform).

• Structural Engineering and Mechanics
• /
• 제31권2호
• /
• pp.211-223
• /
• 2009

Transient response analysis can be conducted either in the time domain, or via the frequency domain. Sometimes a frequency domain method (FDM) has advantages over a time domain method. A practical issue in the FDM is to find out an appropriate extended period, which may be affected by several factors, such as the excitation duration, the system damping, the artificial damping, the period of interest, etc. In this report, the extended period of the FDM based on the Duhamel's integral is investigated. This Duhamel's integral based FDM does not involve the unit impulse response function (UIRF) beyond the period of interest. Due to this fact, the ever-lasting UIRF can be simply set as zero beyond the period of interest to shorten the extended period. As a result, the preferred extended period is the summation of the period of interest and the excitation duration. This conclusion is validated by numerical examples. If the extended period is too short, then the front portion of the period of interest is more prone to errors than the rear portion, but the free vibration segment is free of the wraparound error.