• The Research Journal of the Costume Culture
• /
• v.19 no.4
• /
• pp.876-887
• /
• 2011

The purpose of this study was to determine the fundamental foot measurement data that is essential for a shoes size system of women in their 20~30s according to a survey of Korean hand-made shoes companies. This research on the current situation of shoes companies was done by interviewing and surveying employees of these companies. The subjects for this study were 407 women in their 20s~30s who lived in a metropolitan area, and who wanted to enhance their foot health and prevent injury with a proper shoes size system. They were measured with the 3D scan method in use of 6th Size Korea. The result of this study showed that there is considerable dissatisfaction related to women's shoes and the current foot size system using foot length. The Korean hand-made shoes companies assessed here did not use the KS system, but they recognized the necessity of measuring the foot width and circumference, understanding that doing so properly can decrease the return and repair rate. And current target age for shoes bye the hand-made shoes companies was reported to be approximately 5 years. There were significant results according to ANOVA, factor and cluster analyses according to the age range pertaining to the foot length, circumference and height. Each element was significantly correlated with user's satisfaction. There were 5 factors and 3 clusters represented, and foot circumstance and width were as important as foot length with a range of 5 years.

• The Research Journal of the Costume Culture
• /
• v.21 no.5
• /
• pp.671-683
• /
• 2013

The purpose of this study was to identify middle-school boys' purchase behavior according to their shoes shopping orientation. A self-administered questionnaire was used to collect from 314 subjects. Factor analysis, Chi-square test, and one-way ANOVA were done using SPSS PC (Ver. 18.0). Most middle-school boys selected shoes that were 255~270mm, possessed on to two pairs of school shoes, searched for information for about five days before purchase, had spent 50,000~150,000 won on one to two pairs of shoes during the previous six months, saw design, comfort, and brand as their selection criteria, chose their shoes by themselves, shoes specialty stores, had favorite brands, preferred athletic shoes made of achromatic canvas, and bought new shoes when their old ones wore out. Factors of shoe shopping orientation were fashion and brand, economy, conformity, and comfort, and students were grouped into an active shopping group, an underdeveloped shopping orientation group, and a value pursuit group. The active shopping group bought more shoes, spent more on shoes, selected their shoes themselves, patronized discount shoe stores or specialty stores, and preferred national brand shoes. The underdeveloped shopping orientation group accepted their friends' opinions when selecting shoes and bought cheaper shoes. The value pursuit group accepted their parents' opinions when selecting shoes, patronized internet shopping malls or traditional markets, and selected cheaper shoes. The shoe shopping orientation of middle-school boys was immature, but they showed strong consumption needs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.423-426
• /
• 2005

The injection molding process has applied to a variety of fields by a development of various plastic resins. Recently, this process has been extending to a field of parts of shoes. In this study, the injection mold of shank which is a one of the parts of shoes has been designed. The position of gate and the injection procedure have been optimized by a simulation using the CAE software and an analysis using the DOE. As a result, the improved injection mold of shank has been manufactured in a short time. Appling the CAE and the DOE at the process of the injection mold design eventually lead an increase in the productivity and the quality of parts.

• Fashion & Textile Research Journal
• /
• v.19 no.2
• /
• pp.134-139
• /
• 2017

This study proposes 3D printed shoe designs with patterns made by reinterpreting traditional Korean muntin patterns as customized designs that are unique to individual consumers and different from existing products. In the fashion industry, shoes with diverse designs grafted with 3D printing technology have been introduced. Artistic 3D printed shoes showcase the unique designs of designers. Functional and practical 3D printed shoes that can be worn during daily activities and during exercise have been actively developed. Traditional Korean pattern designs are also being recreated into designs reflecting the aesthetic sense of modern times with our own identity. The uniqueness of the traditional muntin patterns in geometric shapes, such as intersections of lines, rectangles, and octagons, are expressed in shoe designs with modern aesthetic senses by utilizing the traditional patterns that conform well to the modern geometric beauty of forms. This study was intended to develop 3D shoe designs that reinterpreted the motif of muntin patterns from among traditional Korean geometric patterns with a modern aesthetic sense. The octagonal patterns that express the scenery of spring can be seen through the muntins in traditional Korean-style houses were designed on the heels of shoes. Utilizing the Rhino CAD program and ProJet 660 Pro 3D printer, shoes were designed and printed. The processes for making shoes using 3D printing technology proposed in this study are significant because they represent the creation of designs in a new area. The results of this study might help in the development of 3D printed fashion products.

• Fashion & Textile Research Journal
• /
• v.23 no.1
• /
• pp.84-97
• /
• 2021

This study examines the impact of perceived risks for smart shoes based on purchase intention by type of smart shoes as well as how they are mediated by fashion innovativeness and technology innovativeness. It also compares the differences between awareness, interest and perceived risk of smart shoes by gender and age. This study was conducted based on men and women in their 20s to 50s who provided 246 samples for data analysis using SPSS 25.0. The results show significant differences in the awareness, interests and perceived economic risk of smart shoes by gender and age. The perceived performance risk had a positive effect on the purchase intention of smart shoes for GPS. Perceived aesthetic-psychological risk had a negative effect on all types of smart shoes. Perceived economic risk had a negative effect on the purchase intention of smart shoes for entertainment; in comparison, perceived social risk had a positive effect on the purchase intention of smart shoes for GPS and entertainment. Fashion innovativeness and technology innovativeness also mediated the relationship between perceived economic risk as well as the purchase intention of smart shoes for healthcare, GPS and entertainment.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.426-432
• /
• 2005

The health of feet is connected with individual's health and affects a man's activity. Shoes need to be designed to protect feet and to absorb the impact of land. Thus, design, comfort and economical efficiency are important factors of shoes. Consumers can choose suitable shoes for their feet in off-line shopping. However, in on-line shopping, because they can not wear shoes, compare to the off-line shopping, there are many problems in internet shopping. First, consumers can get limited information of shoes because they must search information of purchase without other's help. Second, because consumers can not get important information such as design, size and a comfort of wearing, they can not make a careful decision. Above these, the solution of user-oriented internet shopping is development of new type of prototype which is accessible to user and to offer visual information through 3D-virtual reality. The purpose of this study is to develpoment of shoes easy-order prototype so to reduce of internet shopping risk and offer to shopping convenience. Contents of the new prototype are as follows; 1. Consumers can print out a foot shaped plane figure and compare it to their foot. If the size of printed sheet is not proper, consumers can choose another size. Through this step, they can get their own size. 2. In 3D-virtual reality, consumers can get a various visual information. So they feel wearing comfort indirectly. It is expected that the result of this study would be an important case study to develop of shoes' easy-order prototype for a disabled person.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.193-206
• /
• 2017

The Seongsu handmade shoes street consists of subsidiaries, leather shoe manufacturers, and shoe stores associated with the business as a domestic shoe business cluster. Since its development in the 1980s, the shoe industry has been a center of shoe manufacturing but since the 2000s, it has lacked a fully developed environment, a uniform distribution system, market-oriented brand, marketing and design, and also suffers from an aging workforce. Seoul officials and Seongsu-dong small business owners must overcome these difficulties through town enterprise development, brand creation and marketing co-promoting composition of the characterization and distance, but the situation is still insignificant. The purpose of this study is to determine the actual situation as targeted at small merchant handmade shoes Seongsu-dong Street, to determine the factors in the problem, and to propose substantial improvements for Seongsu handmade shoes street. This study was a survey of street sales outlets in Seongsu handmade shoes street in Seoul. The spatial extent of the study was to set up the scope by reference to the directions given through the Seongsu handmade shoes street site. To build infrastructure facilities and distribution systems for the betterment of handmade shoes Seongsu-dong street, it is important to gain a competitive edge through a specialized industry such as a marketing strategy to establish branding as a specialized company. Shoemakers should also seek their own activation measures in areas such as training professionals, universities and corporate projects for joint participation in the ongoing development of new content. To pioneer the domestic and international sales channels, it is important to broaden the sales infrastructure. These areas will ultimately enable a significant contribution to strengthening national competitiveness.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.206-212
• /
• 2003

This paper presents an analytic method and a design technique for golf shoes with coolant in the insole. The golf shoes are modeled using the finite element method for precision by considering the configuration by the insole, the midsole and the outsole, which compose the golf shoes. The values of standard human foot temperature for heat transfer boundary conditions are adopted for the FEA(Finite Element Analysis). By the commercial FEM software for heat transfer analysis, MARC V7.3, the temperature and the amounts of heat flux change for the insole are obtained, respectively. It can be concluded that results obtained by FEM in the insole are different depending on the characteristic of heat transfer. The results reported herein provide better understanding of analyzing the golf shoes. Moreover, it is believed that those properties of the results can be utilized in the shoes industry to develop the effective design method.

• Journal of Korean Society for Quality Management
• /
• v.32 no.1
• /
• pp.130-143
• /
• 2004

Although consumer needs for better products force manufactures to put emphasis on design, often development of a product has been done without the formal process to consider consumer needs. In order to identify the implicit needs of customers and the areas of potential demand on a product, several analysis scheme such as QFD (Quality Function Deployment) has been developed. QFD, also known as the House of Quality, is the efficient tool ever created to tie product and service design decisions directly to customer wants and needs, i.e. VoC (Voice of Customer) To utilize this tool on a product design, first of all, the consumers attributes and the engineering characteristics must be exactly investigated. However there were only few studies about them on shoe design. Hence in this paper we developed an innovative framework for shoes design based on QFD. As a result, we uncovered 29 dominant human satisfaction dimensions as the consumers attributes for customer-oriented quality evaluation of a comfortable shoes. Here, 29 human satisfaction dimensions for a shoe design were identified as the dimensions that represent the human sensitivity and psychological feeling on comfortable shoes. Also, we proposed 60 human interface elements as the engineering characteristics. The relationships between human satisfaction dimensions and human interface elements were investigated. This study will help the designers and manufacturers clarify the conceptual and abstract aspect of the design evaluation by proposing a more systematic and process-oriented method.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.195-205
• /
• 2003

This paper presents an analytic method and a design technique for golf shoes with air-cycled pump in the midsole. The golf shoes are modeled using the finite element method for better design by considering the configuration of the midsole and the outsole, which compose the golf shoes. Also the optimum size and shape of air-cycled pump in the midsole is examined. The values or standard human pressure for boundary conditions are adopted for the FEA(Finite Element Analysis). The unknown constants of the strain energy function of Ogden type are observed in accordance with the axial tension test. By the commercial FEM software for nonlinear analysis, MARC V7.3, the strains and the values of volume change for the midsole and the outsole are obtained, respectively. It can be concluded that results obtained by FEM in the midsole and the outsole are different depending on the characteristic of elastomer The results reported herein provide better understanding of analyzing the golf shoes. Moreover, it is believed that those properties of the results can be utilized in the shoes industry to develop the effective design method.