• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.726-729
• /
• 2004

This paper concerns on developing a multi-purpose test device for measuring mechanical properties of shoes. The device was modified from a commercial robot manipulator, with which impact, bending, and pronation tests were suggested to evaluate performances of shoes. From several experiments, the developed device could produce repetitive and consistent results corresponding to the different material of shoes. In the shoe industry, it is expected that the device could contribute to developing a better shoe for comfort of costumers.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.297-303
• /
• 1997

This study was initiated to investigate suitability of men's dress shoe sizes made for young men. Experiments were performed on 172 men for 19 to 29 years of age. Nine dimensions were measured from the subject's right foot and 11 dimensions were measrued from the outline of the foot. The data were analyzed for six different groups. The subjects were grouped by their dress shoe size or the ratio of the foot width to foot length. The result of the experiments lead to the following conclusions: 1. Foot length, metatarsal width and heel width were significantly different among the small, medium and large dress shoe size groups. 2. No significant differences in front foot angle and the inside metatarsal width were found among the above three groups. 3. The difference between wearing shoe size and the foot length was larger for the subjects with wide foot shape.

• 한국컴퓨터정보학회논문지
• /
• 제6권3호
• /
• pp.131-136
• /
• 2001

본 연구에서는 스티어혁으로 남성용 구두를 제조하였다. 남성 정장용 구두는 KS G 3116의 시멘트 식 제조방법을 적용하였고. 클로로프렌 접착제로 제조하여 평가하였다. 클로로프렌 접착제를 사용하여 제조한 옥스퍼드형 구두에 대한 접착제의 품질실험으로는 내구성 및 내후성 실험을 하였다. 또한, 여성 정장용 구두뿐만 아니라 남성 정장용 구두제조에 사용한 클로로프렌 접착제의 품질실험 결과는 기대 이상이었다. 접착강도 측정에 있어서 구두 앞 코 끝의 박리강도를 측정하는 KS G 3116의 측정방법은 본 연구에서 적용한 구두 앞코에서 굽자리까지의 전체 박리강도를 측정한 경우와 비교시 매우 일치하였다.

• 한국의류학회지
• /
• 제31권2호
• /
• pp.258-268
• /
• 2007

The purpose of this research is to develop functional midsole that can restrain the heightening of plantar pressure in forefoot pressure so as to develop high-heeled shoes that can lessen foot ailments among women. The pumps shoes used for the research were of the same pumps type last. The variant was heel height, 3cm, 6cm, and 9cm, and the shoes were made in both normal midsole and functional midsole. The variant was applied to investigate the changes of foot pressure on forefoot and hindfoot according to heel height.'Heel Cup' was chosen for modification of functional midsolepumps type. to enlarge contact area in hindfoot, and 'Heel Posting Pad' was attached under sustentaculum tali to suppress the weight moving to forefoot pressure. If such functional parts are developed and used, it is possible to lessen the amount of Pmax or Impulse imposed by high-heeled pumps type on forefoot pressure. This can greatly lessen foot ailments, largely caused by high-heeled shoes, among women.

• 대한물리의학회지
• /
• 제6권2호
• /
• pp.135-143
• /
• 2011

Purpose: The purpose of this study was to investigate onset timing of vastus medialis oblique(VMO) relative to vastus lateralis(VL) the VMO/VL electromyographic(EMG) ratio according to heel height Methods: A repeated measures design was used. Fifteen healthy female college students with no known knee musculoskeletal dysfunction were recruited this study. They carried out a standardised stair acent activity under 4 conditions; barefoot, and with heel height of 1, 3, 7 cm. Muscle activity was measured by surface EMG (Myosystem 1400A, Noraxon Inc., U.S.A). Data were analysed using $1{\times}4$ repeated measures ANOVA. Results: Onset timing differed with heel height(p<.05). However, the VMO/VL EMG ratio was not significantly difference between conditions. Conclusion: We found that 7 cm heel height delayed in VMO onset compared with 3 cm heel height during stair ascent, but no change in the relative EMG intensity of VMO and VL as measured by th VMO/VL ratio. The findings indicate that high-heeled shoes may have disadvantages in knee stability because of delayed onset of VMO. Due to a lack of knee joint stability, wearing of high heeled shoes should be avoided.

• 한국생활과학회지
• /
• 제12권1호
• /
• pp.75-84
• /
• 2003

The objective of this paper was to analyse the foot type of female university students by the direct and indirect measure of foot and the measures of foot outline. The results were as follow: 1. The length and the width of foot were small and ankle slender and the modification of the big toe slight. 2. The analysis on the 16 measure items revealed five factors; the first factor was related to the width and girth of foot, the second one to the length of foot, the third one to the transformation of the little toe, the fourth one to the height of foot, the fifth one to transformation of the big toe. 3. The grouping on the shape of foot revealed three types. The inline angle of foot was the smallest in average in the type 1, while it appeared to be middle in the other types. The wider foot shapes were grouped as type 2 because their inline and outline angles of foot were the biggest in average. In the type 3, the big toe was curved a lot, since it was the largest in average. 4. From the naked eye measuring method, classification from which toe was popped-out told that Egyptian foot was 30.9%, Greek foot 27.9%. On the other hand, the instrumental method showed that Egyptian foot was 57.3%, Squared foot 35.3% and Greek foot 7.4%. 5. The result from the analysis about the traits of foot shape by the degree of the arch formation of bottom foot, showed that 33.8% had the normal foot, 66.2% slightly flat foot or middle one. There was no one with rigid flat foot. 6. The shoes size they declared were that 240cm was 33.3%, 235cm 18.1% and 245cm 18.1%. The shape of their shoe heel were flat heel(34.8%), cuban heel(25.5%), and narrow straight heel(19.9%); and that of the shoe toe were round toe(25.4%), oval toe(20.4%) and squared toe(20.4%). 7. The discomforting parts when they wear shoes were the little toe(35.4%), the rear of foot(13.9%), and the width of foot(13.9%), which was related to their dislike of shoe with the pointed toe.

• 대한가정학회지
• /
• 제41권6호
• /
• pp.1-12
• /
• 2003

The purpose of this study were to analyze the anthropometric data of feet of Korean women with aging, to categorize the women's foot shapes, and to compare the shoe size according to the foot shapes in order to provide the basic information for more comfortable shoes. Subjects of this study were 181 women over age 20. They were measured with the direct measurement method and the indirect measurement method. 26 items were measured from the right foot and 6 items were taken on foot outline. Factor analysis, cluster analysis, analysis of variance, post-hoc test, and cross tabs were peformed for statistical analysis of the data by SPSS program. There were significant differences in height items, breadth items, girth items, and angle items by subjects' age. The older subjects' feet were wide and thick with big deformity on toes. The arch height of the older ones was low. This implicates that the degree of deformity on toes, the foot ratio, the foot girth, the foot breath and the arch height as well as the foot length are needed to be considered in developing comfortable shoes. Nine foot construction factors were extracted by the factor analysis of anthropometric measurements; foot size factor, heel and instep factor, malleolus lateralis factor, malleolus medialis factor, foot shape factor, shape of toes factor, heel height factor, big toe height factor, and internal factor. On the basis of the cluster analysis, three different foot shapes were categorized. Type 1 was large and wide foot with little deformity on little toe. Type 2 was medium foot with deformation of big toe, and with the lowest arch height. Type 3 was small and narrow foot with the highest arch height. Distribution of shoe size according to the foot shape was analyzed. The ball of foot breath was of wide distribution than the ball of foot girth. This implicates that girth items and breath items of the foot should be enclosed for the same foot length in the shoe sizing system.

• 대한물리치료과학회지
• /
• 제20권1호
• /
• pp.17-25
• /
• 2013

The purpose of this research is to provide right information about deformation and to relieve fatigue of high-heels lovers. The research data includes 15 tests and survey on 71 female students. The result follows 1. Age of surveys is mostly 22, consisting 43.7% of all. The most frequently worn shoe kind is high heels that 45.1% of surveys wear 2. Female students those are 155~160cm high wear high heels most frequently, 40.8%. 3. The fatigue condition classified by hours of wearing: Surveys wearing high heels over 7 hours and 5~7 hours state starting to feel fatigue by 40.8%, 38.0% each, and the result was stastically significant 4. The appearance of pain on calf classified by hours of wearing: 35.2% of surveys answered they start to feel pain when worn high heels over 7 hours, and 33.8% of students answered 5~7 hours 5. The fatigue condition classified by kinds of shoes worn: 45.0% of the surveys felt tired when wearing high heels, 40.8% answered wearing heel inserted running shoes, and 14.0% for flat shoes. 6. The fatigue condition classified by heel height: 69.0% of survey answered they feel fatigue after wearing shoes with 5~9cm high heels, 21.1% answered under 3cm high heels, and 9.9% answered over 10cm heels(p<0.05) 7. The experience of cramp in calf cramp muscle classified by heel height: 69.0% of surveys experienced cramp when wearing 5~9cm high heels, 21.1% answered under 3cm high heels, 9.9% for over 10cm heels.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.1-7
• /
• 2005

Excessive pronation and impact force during running are related to various running injuries. To prevent these injuries, three type of running shoes are used, such as cushioning, stability, and motion control. Although there were may studies about the effect of midsole hardness on impact force, no study to investigate biomechanical effect of motion control running shoes. The purpose of this study was to determine biomechanical difference between cushioning and motion control shoes during treadmill running. Specifically, plantar and rearfoot motion, impact force and loading rate, and insole pressure distribution were quantified and compared. Twenty male healthy runners experienced at treadmill running participated in this study. When they ran on treadmill at 3.83 m/s. Kinematic data were collected using a Motion Analysis eight video camera system at 240 Hz. Impact force and pressure distribution data under the heel of right foot were collected with a Pedar pressure insole system with 26 sensors at 360 Hz. Mean value of ten consecutive steps was calculated for kinematics and kinetics. A dependent paired t-test was used to compare the running shoes effect (p=0.05). For most kinematics, motion control running shoes reduced the range of rearfoot motion compared to cushioning shoes. Runners wearing motion control shoe showed less eversion angle during standing less inversion angle at heel strike, and slower eversion velocity. For kinetics, cushioning shoes has the effect to reduce impact on foot obviously. Runners wearing cushioning shoes showed less impact force and loading rate, and less peak insole pressure. For both shoes, there was greater load on the medial part of heel compared to lateral part. For pressure distribution, runners with cushioning shoes showed lower, especially on the medial heel.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.101-108
• /
• 2006

The purpose of this study was to compare GRF characteristics during walking wearing jogging and roller shoes. Twelve male middle school students (age: $15.0{\pm}0.0\;yrs$, height: $173.6{\pm}5.0\;cm$, weight: $587.6{\pm}89.3\;N$) who have no known musculoskeletal disorders were recruited as the subjects. Kinematic data from six S-VHS camcorders(Panasonic AG456, 60 fields/s) and GRF data from two force platform; (AMII OR6-5) were collected while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and GRF recordings. GRF data were filtered using a 20 Hz low pass Butterworth. digital filter and further normalized to the subject's body weight. For each trial being analyzed, five critical instants and four phases were identified from the recording. Temporal parameters, GRFs, displacement of center of pressure (DCP), and loading and decay rates were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p <.05). Vertical GRFs at heel contact increased and braking forces at the end of initial double limb stance reduced significantly when going from jogging shoe to roller shoe condition. Robbins and Waked (1997) reported that balance and vertical GRF are closely related It seems that the ankle and knee joints are locked in an awkward fashion at the heel contact to compensate for the imbalance. The DCP in the antero-posterior direction for the roller shoe condition was significantly less than the corresponding value for the jogging shoe condition. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the DCP for the roller shoe condition was restricted The results indicate that walking with roller shoes had little effect on temporal parameters, and loading and decay rates. It seems that there are differences in GRF characteristics between roller shoe and jogging shoe conditions. The differences in GRF pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine muscle activation patterns and joint kinematics during walking with roller shoes.