• Journal of The Korean Astronomical Society
• /
• v.54 no.3
• /
• pp.103-112
• /
• 2021

The intracluster medium (ICM) is expected to experience on average about three passages of weak shocks with low sonic Mach numbers, M ≲ 3, during the formation of galaxy clusters. Both protons and electrons could be accelerated to become high energy cosmic rays (CRs) at such ICM shocks via diffusive shock acceleration (DSA). We examine the effects of DSA by multiple shocks on the spectrum of accelerated CRs by including in situ injection/acceleration at each shock, followed by repeated re-acceleration at successive shocks in the test-particle regime. For simplicity, the accelerated particles are assumed to undergo adiabatic decompression without energy loss and escape from the system, before they encounter subsequent shocks. We show that in general the CR spectrum is flattened by multiple shock passages, compared to a single episode of DSA, and that the acceleration efficiency increases with successive shock passages. However, the decompression due to the expansion of shocks into the cluster outskirts may reduce the amplification and flattening of the CR spectrum by multiple shock passages. The final CR spectrum behind the last shock is determined by the accumulated effects of repeated re-acceleration by all previous shocks, but it is relatively insensitive to the ordering of the shock Mach numbers. Thus multiple passages of shocks may cause the slope of the CR spectrum to deviate from the canonical DSA power-law slope of the current shock.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.4
• /
• pp.251-260
• /
• 2023

Objectives: This study aimed to provide basic data for the development of clinical practice-related education program by analyzing the effects of grit, job satisfaction, and retention intention on transition shock of new dental hygienists. Methods: From April 19 to July 4, 2022, the data was collected from 200 new dental hygienists working for dental hospitals/clinics. Using the SPSS Statistics ver. 22.0, this study was conducted the t-test, one-way ANOVA, Pearson's correlation analysis, and multiple regression analysis. Results: There were positive correlations between grit, job satisfaction, and retention intention, a negative correlation between grit and transition shock, a positive correlation between job satisfaction and retention intention, a negative correlation between job satisfaction and transition shock. and a negative correlation between retention intention and transition shock. As the factors affecting transition shock, lower pay and main performance of medical cooperation work increased transition shock. When job satisfaction and retention intention were higher, transition shock decreased. Conclusions: In order to reduce transition shock of new dental hygienists, it would be necessary to operate clinical practice-related training program, and also to establish a training environment similar to the clinical site/context/situation similar to clinical context/situation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.5
• /
• pp.558-563
• /
• 2008

Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc' spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock Isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing $h_o/t$ ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.990-993
• /
• 2008

Vibration/shock affects biggest taking a train subtraction of vehicle and durability decline. Therefore, absorber is used for vibration/shock isolation and various qualities of the material and design are applied to isolation. This paper proposes vibration/shock absorber that applies 'Disc'spring. Through comparison with 'Disc' spring that has nonlinearity and coil spring that is having linearity, see effect that nonlinearity of isolation gets in vibration/shock isolation. Coil spring and 'Disc' spring are non-linear numerical analysis and simulation through theory for this, get and investigate comparison result through an experiment finally. Expressed and formulated shock through 'Runge-Kutta' method/impact response to nonlinear-vibration-equation of 1 degree of freedom for numerical analysis. Double half sine pulse of excitation used and analyzed result through spectrum response analysis here. Response of disc spring is compared to response of coil spring by changing ho/t ratio with computer simulation and the usage of disc spring is increased through analysis of effect of design factors. The purpose of this paper is that the shock response of disc spring is calculated through numerical simulation and to design the optimal absorber under the limited condition. And then, the isolation effect was analyzed through the shock test.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.28 no.2
• /
• pp.156-166
• /
• 2022

Purpose: The purpose of this study was to identify factors that can affect transition shock in newly-graduated nurses. Methods: The first descriptive written survey was conducted on 450 graduate students from five nursing colleges. After their employment, the second survey was conducted on 316 participants who had responded to the first survey. A total of 158 respondents were used for the final analysis. Data were analyzed using an independent t-test, ANOVA, Tukey test, Pearson's correlation coefficient, and hierarchical multiple regression analysis with the SPSS Win 25.0 Program. Results: The average age of the participants was 24.25±4.47. Of the participants, 126 (79.8%) were satisfied that they had majored in nursing. The average score for transition shock was 2.61±0.55 points. Factors influencing the transition shock of newly-graduated nurses were the working department, working period, and working environment. The more positively the newly-graduated nurses perceived the nursing work environment, the less of a transition shock they experienced. Grade point average, clinical competence, confidence in performing core nursing skills, and nursing professionalism did not affect their transition shock. It could be confirmed that there is a gap between college nursing education and the clinical field. Conclusion: In order to reduce the transition shock of newly-graduated nurses, it is necessary to improve the nursing work environment and apply educational and emotional support strategies according to the characteristics of each work department and the period of work.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.152-159
• /
• 2007

When the electronics are tested with thermal shock for Pb-free solder joint reliability, there are temperature conditions with use environment but number of cycles for test don't clearly exist. To obtain the long term reliability data, electronic companies have spent the cost and times. Therefore this studies show the test method and number of thermal shock cycles for evaluating the solder joint reliability of electronic components and also research bonding strength variation with formation and growth of intermetallic compounds (IMC). SMD (surface mount device) 3216 chip resistor and 44 pin QFP (quad flat package) was utilized for experiments and each components were soldered with Sn-40Pb and Sn-3.0 Ag-0.5 Cu solder on the FR-4 PCB(printed circuit board) using by reflow soldering process. To reliability evaluation, thermal shock test was conducted between $-40^{\circ}C\;and\;+125^{\circ}C$ for 2,000 cycles, 10 minute dwell time, respectively. Also we analyzed the IMCs of solder joint using by SEM and EDX. To compare with bonding strength, resistor and QFP were tested shear strength and $45^{\circ}$ lead pull strength, respectively. From these results, optimized number of cycles was proposed with variation of bonding strength under thermal shock.

• Journal of Welding and Joining
• /
• v.28 no.3
• /
• pp.79-85
• /
• 2010

Hardfacing is one of the frequently applying method to increase surface hardness in hot forging die. Recently, hardfacing receives great attention due to it's repair availability and low cost. In hot forging die, crack resistance and thermal shock resistance have been considered as major properties, However there are few studies for the assessment of these properties. So, it is necessary to establish the assessment method for crack resistance and thermal shock resistance in hardfacing for hot forging die. In this study, flux cored arc welding was applied to make hardfacing welds. Three point bending test was carried out to assess hardfacing weld's crack resistance, and high temperature bending test using salt bath was developed for thermal shock resistance. Consequently, it was possible to assess crack resistance and thermal shock resistance of hardfacing welds for hot forging die quantitatively.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.383-384
• /
• 2016

본 논문에서 shock test를 적용한 고출력 리튬이온 원통형 셀의 내부 전기화학적 특성을 비교하였다. 용량이 동일한 고출력 리튬이온 원통형 셀을 사용하여 shock test를 적용하였다. 충격 전후에 OCV (Open Circuit Voltage) 및 HPPC (Hybrid Pulse Power Characterization) 테스트 기반 방전용량 및 내부저항을 측정하였으며 이를 통해 각 고출력 리튬이온 원통형 셀의 일정한 변화율을 확보하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.307-311
• /
• 2008

Ground test of model Scramjet engine was performed with T4 free-piston shock tunnel at University of Queensland, Australia. Test condition of free stream was Mach 7.6 at 31 km altitude. With this condition, variation effects of fuel equivalence ratio, cavity, cowl setting were investigated. In the results, supersonic combustion or thermal choking was observed depending on the amount of fuel. Cavity and W-shape cowl showed early ignition and enhanced mixing respectively.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.314-322
• /
• 2017

This study investigates changes in the mechanical behavior, such as changes in indentation load-displacement curve, wear resistance and contact fatigue resistance of thermal barrier coatings (TBCs) by thermal cycling test and thermal shock test. Relatively dense and porous TBCs on nickel-based bondcoat/superalloy are prepared; the highest temperature applied during thermal durability test is $1350^{\circ}C$. The results indicate that the porous TBCs have relatively longer lifetime during thermal cycling and thermal shock tests, while denser TBCs have relatively higher wear and contact fatigue resistance. The mechanical behavior is influenced by sintering of the TBCs by exposure to high temperature during tests.