• 전산구조공학
• /
• 제11권1호
• /
• pp.153-160
• /
• 1998

본 연구에서는 가압열충격 사고로 소형 냉각재 상실사고를 가정하여 냉각재의 온도와 압력의 이력으로 부터 용기 벽의 온도분포를 구하고, 이로 부터 열응력과 압응력을 해석적으로 구하였다. 또 균열 선단에서의 응력강도계수와 파괴인성치를 ASME코드의 방법을 이용하여 구하였고, 이들을 시간에 따라 비교하여 균열의 진전여부를 평가하였다. 원자로 용기 벽에 존재하는 여러 형태의 균열이 견딜 수 있는 최대 기준무연성천이온도를 결정하였으며 평가 결과에 대하여 고찰하였다.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.111-116
• /
• 2001

A practical scheme to reduce failure of the PCB(Printed Circuit Board) of a monitor is introduced using deformed mode shape under mechanical shock. When the monitor is given critical shock loads, cracks are commonly initiated at the tip of a hole on the PCB. Accordingly, a deformed mode shape of the PCB is obtained using a FEM code to define a weak point on the PCB under mechanical shock, and then the position and direction of the hole is determined to prevent the failure at the critical mode shape. Also, the stress intensity factor around the weak point on the PCB is calculated to check the possibility of fracture by normal tensile stress. In conclusion, present research is useful to assist the practical design of components-layout on the PCB.

• 오토저널
• /
• 제14권6호
• /
• pp.91-98
• /
• 1992

In the research on the fracture time of soda lime silicate glass under thermal shock, it is shown that the theoretical and experimental fracture times are in good agreement, the suggested method to measure critical stress intensity factor for small three-point bending specimen is useful and the edge temperature before thermal shock on cracked side vs. crack length and fracture time are inversely proportional.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.76-81
• /
• 2000

Analysis on failure of the panel glass under mechanical shock is the main topic of this study. Since the glass for the LCD panel is thin, it needs to be designed to have enough toughness against mechanical shock. In this paper, a process of estimating fracture of the panel glass is proposed to guarantee reliability of the product. The fracture toughness of the panel glass is used as a criterion of the fracture based on an experimental approach. The stress intensity factor was calculated considering a model with the largest initial crack size on a cut surface and with the boundary force obtained from a dynamic finite element analysis. Critical surface roughness on the cut surface of a typical glass panel, to prevent fracture in case of bending mode, is obtained.

• 한국방사선학회논문지
• /
• 제8권7호
• /
• pp.461-466
• /
• 2014

체외 충격파 쇄석술시 쇄석기종에 따라 각각 장단점이 있으며, 전 처치로 인한 여러 가지 부작용이 보고되고 있다. 이에 전자기식 ESWL시 하부결석환자에서 적합한 충격파의 강도를 찾아보고, C-arm의 총 가동시간을 측정해 보았다. 본 연구는 2014년 1월부터 6월까지 경북지역 일개시의 C대학병원에서 전 처치를 시행하지 않고 ESWL을 받은 65명의 환자를 대상으로 하였다. 성비는 남자가 48명, 여자가 17명으로 남자가 더 많았으며, 연령은 50대가 가장 많았다. 하부요로결석의 발생은 왼쪽이 더 많았으며, 결석의 크기는 5mm 이하가 39명으로 가장 많았다. 적합한 충격강도는 1의 강도이며 통증을 호소하는 경우 C의 강도로 전환하여 충격을 가할 수 있다. 또한 C-arm의 총 가동시간은 $241.73{\pm}30.37$초로 나타났으며, 이것은 하부요로결석의 크기와 유의한 차이를 보였다(p<0.05). 따라서, ESWL시 전처치를 시행하지 않고 시술을 할 경우 요관 결석의 부위에 따라 적합한 충격강도와 충격빈도의 기준이 필요로 하며, C-arm 총 가동시간도 요관 결석의 발생부위에 따라 방사선으로 인한 피폭을 최소화하기 위한 총 가동시간에 대한 기준이 필요할 것으로 사료된다.

• Advances in aircraft and spacecraft science
• /
• 제2권1호
• /
• pp.45-56
• /
• 2015

The attitude aerodynamic control is an important subject in the design of an aerospace plane. Usually, at high altitudes, this control is fulfilled by thrusters so that the implementation of an aerodynamic control of the vehicle has the advantage of reducing the amount of thrusters fuel to be loaded on board. In the present paper, the efficiency of a wing-flap has been evaluated considering a NACA 0010 airfoil with a trailing edge flap of length equal to 35% of the chord. Computational tests have been carried out in hypersonic, rarefied flow by a direct simulation Monte Carlo code at the altitudes of 65 and 85 km, in the range of angle of attack 0-40 deg. and with flap deflection equal to 0, 15 and 30 deg.. Effects of the flap deflection have been quantified by the variations of the aerodynamic force and of the longitudinal moment. The shock wave-boundary layer interaction and the shock wave-shock wave interaction have been also considered. A possible interaction of the leading edge shock wave and of the shock wave arising from the vertex of the convex corner, produced on the lower surface of the airfoil when the flap is deflected, generates a shock wave whose intensity is stronger than those of the two interacting shock waves. This produces a consistent increment of pressure and heat flux on the lower surface of the flap, where a thermal protection system is required.

• 한국응용곤충학회지
• /
• 제15권3호
• /
• pp.153-159
• /
• 1976

Sclerotinia sclerotiorum(Lib.) de Bary의 상치, 오이 및 유채의 3균주에 대하여 PDA를 기본부지로하여 광선이 이들의 균핵형성에 미치는 영향을 연구하였다. 광원으로서는 주광색 형광등을 사용하였다. 그 결과를 요약하면 다음과 같다. 1) 계속광처리에서 광도 480Lux까지는 광도가 증가함에 따라 증가했지만 성숙균핵의 건물중은 이와는 반대로 감소하였다. 그리고 800 Lux 처리에서는 균핵시원체의 유기가 크게 억제되었고 성숙균핵은 거의 형성되지 않았다. 2) 5000Lux의 고광도라 하더라도 48시의 단시간처리는 균핵시원체수 및 성숙균핵수를 증가시켰다. 그러나 성숙균핵의 건물중은 160 Lux에서만 다소 증가하는 경향이 있었다. 3) 광 shock 즉 1분간치의 계속광 48시간까지의 160 Lux, 500Lux 처리는 모두 균핵형성수와 건물중을 증가시켰는데 균핵형성수와 건물중을 증가시켰는데 균핵형성수는 500Lux에서 균핵건물중은 160Lux에서 더 높았다.

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.17-25
• /
• 2009

The surface cleaning method based on the laser-induced breakdown (LIB) of gas and subsequent plasma and shock wave generation can remove small particles from solid surfaces. In the laser shock cleaning (LSC) process, a high-power laser pulse induces optical breakdown of the ambient gas above the solid surface covered with contaminant particles. The subsequently created shock wave followed by a high-speed flow stream detaches the particles. In this work, a novel surface cleaning process using laser-induced breakdown of liquid is introduced and demonstrated. LIB of a micro liquid jet increases the shock wave intensity and thus removes smaller particle than the conventional LSC method. Experiments demonstrate that the cleaning force and cleaning efficiency are also increased significantly by this method.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.345-351
• /
• 1998

Thermal shock resistance of $Al_2O_3$- and Fe-$Al_2TiO_5$-based Castable Refractories was studied using a central heating technique. Ring type specimens, 10mm thick and 20 and 100mm inner and outer diameters, respectively, were rapidly heated on the internal surface of the centre hole using a high power electrical heating element. The temperature field was measured experimentally and modelled using finite element analysis (FEA). The thermal stress field was also modelled using FEA. A radial notch was introduced to the ring specimens to enable calculation of the thermal stress intensity factors (SIF). A special LVDT device was incorporated in the thermal shock tester to monitor crack mouth opening displacement (COD). The thermal shock fracture initiation and crack propagation behaviour of the castable refractories were ascertained using the COD measurements and the fracture mechanics analysis data.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1171-1177
• /
• 2011

A high power laser beam focused on a small area accelerates a thin material that flies and hits other target material in which a shock wave may be induced. This laser induced shock experimental method is more repeatable and cheaper but worse than other experimental method using gas gun or other apparatus. An optical system including a phase zone plate reduces the interference and also makes the focused-beam-intensity distribution uniform. We wrote a computer code that calculates light ray traces. Using the code we designed and fabricated an optical system including a phase zone plate and improved the laser-beam uniformity. We introduce preliminary experimental results of laser induced shock of the samples such as aluminum and other materials.