• Journal of the Korean Geosynthetics Society
• /
• v.21 no.2
• /
• pp.57-65
• /
• 2022

This study simulated the shock wave propagation through the tamping material between explosives and hole wall at blasting works and verified the effect of tamping materials. The Arbitrary Lagrangian-Eulerian(ALE) method was selected to model the mixture of solid (Lagrangian) and fluid (Eulerian). The time series analysis was carried out during blasting process time. Explosives and tamping materials (air or water) were modeled with finite element mesh and the hole wall was assumed as a rigid body that can determine the propagation velocity and shock force hitting the hole wall from starting point (explosives). The numerical simulation results show that the propagation velocity and shock force in case of water were larger than those in case of air. In addition, the real site at blasting work was modeled and simulated. The rock was treated as elasto-plastic material. The results demonstrate that the instantaneous shock force was larger and the demolished block size was smaller in water than in air. On the contrary, the impact in the back side of explosives hole was smaller in water, because considerable amount of shock energy was used to demolish the rock, but the propagation of compression through solid becomes smaller due to the damping effect by rock demolition. Therefore, It can be proven that the water as the tamping media was more profitable than air.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.194-203
• /
• 2017

The center of percussion(COP) is the point of an extended massive object attached to a pivot where a perpendicular impact will produce no reactive shock at the pivot. COP is an important concept in the field of vibration and dynamics. In vibration, COP causes reduction of vibration and in dynamics, it brings about maximum speed of an object. Many studies about COP are still in progress. However most of the researches have typically focused on the method of mathematical and numerical anlalysis. In this paper, impact analysis was proved by the mechanical energy method using EDISON co-rotational plane beam transient analysis program. The result expressed in acceleration was the relative magnitude of the impulse, which was the indicator of COP. Then, these results were compared with the reference thesis results for exact consequences. Additionally, parametric study of COP was conducted.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.582-585
• /
• 2004

Most of hard disk drives currently employ fluid dynamic bearing (FDB) for their rotor support. Stiffness of the FDB is affected by many design factors such as bearing clearance, fluid viscosity, and rotational speed. For the high rotating speed HDDs stiffness of the rotor is normally high enough to accomodate load disturbances. However small form factor HDDs that are to be operated in low power consumption are often designed with low stiffness rotors. Although the low stiffness rotor clearly benefits low power operation, it could damage the entire motor structure or head disk interface even by a light mechanical load disturbance such as shock or vibration. In addition, since a single channel HDD does not provide gram load equilibrium in axial direction the rotor could be tilted and make a hard contact to stator. A non-symmetric groove pattern could successfully compensate the tilted rotor angle during operation.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.60-65
• /
• 2015

In this paper, we used the sound of gunshots recorded by multiple microphones to increase the accuracy of the calculation of the distance between sniper and the microphone array. This method is crucial for achieving military objectives. Gunshots are comprised of the explosion of driving gas from the muzzle and the supersonic shock wave from the flying bullet. The original distance calculation method compares the time difference of arrival and angle of incidence to estimate the sniper's location. The disadvantage of this method is that when the angles of incidence coincide the margin of error increases, to solve this problem we suggest a new method using the characteristic changes of the shock wave with the increase of perpendicular distance between the microphone and the trajectory of the bullet. This theory is verified by experiments.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.123-128
• /
• 2010

Science and Technology SATellite-3 (STSAT-3) is science purpose satellite which weighs below 170kg. This is classified as small satellite or micro satellite more specifically. The launch vehicles (launchers) for small satellite has their own requirements for environmental interface. Since the small satellites are usually launched with cluster or multiple payloads, the selection option for appropriate launcher is limited. Therefore, the satellite should be designed with the consideration of environmental requirements of these launchers. In this paper, the environmental requirement of most candidated launchers for small satellite is summarized and give satellite environmental requirement to accommodate all launchers requirements.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.35-40
• /
• 2010

In this study, the reliability of thermal shock, thermal cycle, and complex vibration test at high temperature were examined for 3 types of lead-free solder alloys, Sn-3.5Ag, Sn-0.7Cu and Sn-5.0Sb. For the reliability test, daisychained BGA chips with ENIG-finished Cu pad was assembled with the three lead-free solders on OSP-finished PCBs. Among the 3 types solder alloys, Sn-3.5Ag solder alloy showed the highest degradation rate of electrical resistance and joint strength. On the other hand, Sn-0.7Cu solder alloy had high stability after the reliability tests.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.22-27
• /
• 2011

Rain sensor detecting the presence of rain outside windshield glass of automobile by receiving scattered light from rain drops is proposed. Rain sensor using windshield glass as light waveguide required precision optical apparatus to inject light signal into windshield glass, and it was susceptible to outside shock and vibration, resulting malfunction, which altered optical coupling ratio. Proposed rain sensor, which detected scattered light from rain drops outside optical waveguide, did not require optical components because it did not need to inject light signal into light waveguide. This was advantageous because the sensor was less effected by shock and vibration. Fabricated rain sensor using scattered light outside waveguide responded not only to rain drops but also mist particles under simulated rain conditions using spraying nozzle, thus it showed prospects as rain sensor for automobile application.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.127-132
• /
• 1991

충격에 민감한 용기나 기계들은 운반이나 보관중에 받을 수 있는 진동충격 을 완화시키기 위해 충격 마운트를 이용하게 되며, 충격마운트는 용기나 기 계들이 허용하는 최대가속도와 이들이 취급되는 환경에 의해 적절히 선정되 어야 한다. 그러므로 내충격 설계는 최대 허용 가속도나 취급환경에 대한 사 양과 이 사양에 의한 충격 마운트의 선정, 그리고 선정된 내충격 시스템의 충격시험에 의한 오일 탬퍼의 결합용이 사용되기도 하지만 구조가 복잡하고 가격이 비싸서 대용량이 경우에만 국한되어 사용되고 있으며, 가장 경제적인 것은 방진고무를 사용한 것이다. 내충격 시스템은 일반적으로 큰 변형량을 요구하고 있으며, 방진고무의 경우 큰 변형에서는 hardening 스프링의 비선 형성을 가지고, 형상계수와 고무배합율에 따라 정적 스프링상수와 동적 스프 링상수가 큰 차이를 보이는 등, 설계상의 여러 제한이 있다. 그러나 방진고 무는 형상변화가 자유로우며 제작이 용이하기 때문에 이러한 장점을 이용하 면 저렴하고 다양한 용도의 충격마운트 제작에 효과적으로 사용될 수 있다. 본 논문에서는 원통형 콘테이너의 내충격 설계를 위해 충격사양에 의한 충 격마운트의 설계, 설계된 내충격 시스템의 충격시험에 의한 검증을 순차적으 로 실시하여, 방진고무를 이용한 충격마운트 설계기술을 제시함으로써, 이후 방진고무제품의 설계를 위한 자료 및 과정의 제정에 도움을 주고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.660-665
• /
• 2006

This paper presents a finite element method to analyze the free and forced vibration of a hard disk drive (HDD) considering the flexibility of a spinning disk-spindle with fluid dynamic bearings (FDBs), an actuator with pivot bearings, an air bearing between head-disk interface and the base with complicated geometry. Finite element equation of each component is consistently derived with the satisfaction of the geometric compatibility of the internal boundary between each component. The spinning disk, hub and FDBs are modeled by annular sector elements, beam elements and stiffness and damping elements, respectively. The actuator am, E-block, suspension and base plate are modeled by tetrahedral elements. The pivot bearing in the actuator and the air bearing between head-disk interfaces are modeled by the stiffness element with five degrees of freedom and the axial stiffness, respectively. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem with the restarted Arnoldi iteration method. Modal and shock testing are performed to show that the proposed method well predicts the vibration characteristics of a HDD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.642-648
• /
• 2019

This paper presents a fast back-type transfer device for snack food processing that uses the inertia of transferred material. A conventional conveying system is a drive system that uses a belt conveyor and mechanical crank, which generate noise and vibration and cause environmental pollution. Vibration and noise are reduced in the proposed fast back feeding device by using a counterweight. The crank drive unit was replaced with a linear servomotor, and an equilibrium device was designed to balance the force due to acceleration. This makes it is possible to adjust the forward and backward speed and acceleration through PLC control. A vibration damper device offsets the vibration force of the periodic shock form. The main cause of the vibration was identified through vibration analysis, and reduction measures were established. We verified the effectiveness of the vibration by making a prototype and performing about 10 vibration tests. Because no mechanical transducer is needed, energy loss, noise, and vibration do not occur, and the operating speed is not limited.