• 한국정보통신학회논문지
• /
• 제24권1호
• /
• pp.28-36
• /
• 2020

조선소에서 이루어지는 선박 건조는 용접에 의해 수행되고 있으며, 친환경선박에 대한 국제적인 요구에 따라 용접물량은 증가하고 있다. 용접부는 비파괴검사를 통하여 품질을 보증하고 있으며, 검사 정보를 나타내는 리포트는 인력이 설계된 도면을 확인하여 수작업으로 용접검사 리포트가 작성된다. 이 과정에서 소요되는 많은 공수와 인적오류로 인하여 손실이 발생하고 있다. 이러한 문제 해결을 위해 본 논문에서는 조선 전용 CAD 소프트웨어를 기반으로 설계된 데이터를 입력하여 용접검사에 관한 리포트가 자동으로 생성되는 시스템에 대하여 다룬다. 개발하는 시스템은 모델링의 도면으로부터 형상 데이터를 분석하여 부재 면의 확장을 통해 용접부를 판단 및 태그 넘버를 생성하고, 용접길이, 두께, 재질 등 검사에 필요한 정보를 자동으로 추출하는 기능을 제공한다. 시스템의 유용성을 검증하기 위해 시스템을 통해 추출된 검사 정보와 모델링 도면을 비교하여 일치하는 것을 확인하였다.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.214-222
• /
• 2012

The shipbuilding process is changing due to changes in the development environment and technological requirements for military ships. This would also hold true for a submarine, because its shipbuilding process includes complicated design and construction conditions. System improvement efforts for the design and construction of military ships have continued with the goal of overcoming these conditions. At present, the Korea Navy is developing a 3,000 ton-class Korean type submarine, and its design is progressing by the introduction of a full 3D-ship CAD system. Although the 3D modeling system was introduced for effective design realization through the introduction of collaborative design and active utilization of M&S (modeling and simulation), the introduction effects are not yet generally obvious, according to the characteristics of ship design. The present paper discusses the collaborative environment for developing a submarine to enhance this. This paper proposes the architecture and data structure of a system for realizing collaborative design and discusses a case system developed on the basis of this.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.613-627
• /
• 2010

Ships and off-shore plants have very long lifecycles. Design data of ships and off-shore plants are used as master data in the subsequent phases after the design phase. Therefore, it is an important issue how to convert native design data generated from commercial shipbuilding CAD systems into neutral data with the use of international industrial data standards. International standard-based exchange of ship outfitting and off-shore plant data needs the construction of a library for specifications data of equipment and materials and the provision of external referencing mechanism for retrieving data stored in the library. This paper proposes an approach to construct a specifications data library with the use of ISO 15926 process plants. This library is used for providing specifications data through external referencing when translating ship outfitting data from TRIBON system into ISO 10303 STEP AP 227-formed data.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.74-81
• /
• 2010

Ship STEP is the international standard for the exchange of ship modeling data between heterogeneous systems. It is expected that STEP AP218 can be used for seamless data exchange between various CAD/CAM/CAE systems used in the shipbuilding design process. Although the conformance assessment for standards would maximize the performance and confidence about data exchanges, most research has been directed toward interoperability testing. ISO SC4/TC184 only provides the method for conformance testing, and it can be used with test cases on application protocols. Even though standards have been defined for conformance assessment and testing, there is no organization or association. CAD vendors have focused on interoperability testing for evaluation of the performance of their systems. In this paper, the conformance testing criteria for AP218 have been developed with abstract test cases of ship structures. The requested STEP translator was also reviewed with a developed item pool of testing criteria. The criteria methodology would be a guideline for the development of translators and interfaces. The item pool method of testing criteria for conformance assessment would increase performance and efficiency of data translators for Ship STEP and other standards.