• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.241-253
• /
• 2013

A Shipbuilding design program used in the shipbuilding industry tends to be shifted from the TRIBON software to the AM(AVEVA MARINE) software these days. Many large domestic shipbuilding companies have been using the AM instead of the TRIBON. New design software requires education programs for the necessary personnel. However the education programs for the AM are largely based on offline education. They suffer from constraints in space and time, and from high costs. This paper describes a development of online contents for the AM software that are focused for cyber education. It covers the applied process and the organization of the contents. The details of the development decisions including the security issue for the contents are described also.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.134-135
• /
• 2021

조선해양 관련 산업에서는 아직 일본식 및 한자식 조선용어, 외래어가 자리 잡아 일상적으로 사용되고 있다. 대표적인 예로 고박(固縛, こばく), 취부(取付, とりつ), 반생(番線, ばんせん) 등이다. 용어의 정의는 국가 표준 및 관련 법령의 기본이며, 특히 국내 해양레저 관련 산업의 경쟁력 향상을 위하여 필수적이다. 이에 일부 혼용 중인 해양레저장비 관련 선체, 의장품, 범장 등과 관련하여 영문 명칭, 외래어 사용시 표기법, 권장 한국어 등으로 구분하여 표준화 방안을 제시하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.101-107
• /
• 2016

Generally, the shipbuilding industry has finite resources and limited workspace. Due to finite resources, limited workspace and state of block preparation, erection process in shipbuilding industry is frequently delayed than erection process scheduling which is planned at long-term plan stage. In this study, considering variability of block reserve ratio, the degree of delay in real erection process is measured and compared to scheduling which is planned at long-term plan stage in shipbuilding industry including finite capacity and variative lead time. Also, the erection process scheduling which has minimum lead time can be checked through simulation. The results of this study could be improved the accuracy of erection process scheduling by checking the main event compliance ratio by block reserve ratio and calculating the optimum erection pitch for the main event compliance.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.46-51
• /
• 2016

The TMCP steel has expanded in the marine structure during manufacturing process because of its excellent weld-ability and impact toughness. In the case of merchant ships, coverage of TMCP steel has been used widely on over DH36 Classifications material. The line heating process is applied to the outer surface of the steel plate for the shipbuilding. In this study, We compared between TMCP and normalizing steel for shipbuilding by analyzing some basic data through performing the natural cooling after the line heating. The experimental results show the angular misalignment changes in line heating. Heated surface of normalizing steel material expanded to $-0.3^{\circ}$ and reduced to $+0.2^{\circ}$ after cooling. And during cooling at $194^{\circ}C$ for 1,500 seconds, Angular Misalignment began from - direction to + direction, passed the critical point to the default at 2,200 seconds and did not take place any more at $103^{\circ}C$ after the 2,700 seconds. Angular Misalignment results of TMCP steels and Normalizing steel material show same angular misalignment lasted 1,200 seconds, TMCP steel has given more expansion and contraction angle which is $0.2^{\circ}$ than that of the Normalizing steel. Length difference between expansion and contraction is about 0.3 mm.

• Information Systems Review
• /
• v.12 no.1
• /
• pp.43-58
• /
• 2010

In order to improve total competitive advantages in domestic shipbuilding industry, shipyards as well as marine-parts companies achieve managerial efficiency through ERP system. But, successful ERP system implementation cases of marine-parts companies are seldom reported by characteristics of small and build-to-order industry. Therefore, this study attempts to analyze a case for ERP system implementation in marin-parts company, K Inc. Especially, this study divides ERP system implementation process into preparation stage, implement stage and settle-down and stabilization stage, and then derives critical success factors in each stage. At present, the implemented ERP system is successfully operating, ERP system improve qualitative and quantitative performance. The result of study suggests some practical implications to the manager of marine-parts companies and the manager of Informatization Programs for Small and Medium Enterprises.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.80-81
• /
• 2020

Due to COVID 19, the global economy is facing a crisis situation, and in the export-oriented industry, companies must consider survival. The government and industry are striving to revitalize exports in a number of ways, and with restrictions on non-face-to-face export activities, they are contemplating various ways to implement non-face-to-face export marketing. Among them, various studies are being conducted in various industries on the part of conducting an online exhibition. In particular, the shipbuilding and offshore industry is a major export industry, and offline exhibitions held around the world were an important opportunity for marketing, and the use of online exhibitions to substitute for them is urgently needed. In this study, we study AR, VR, MR, etc., which are various element technologies necessary for building an online exhibition hall suitable for the shipbuilding and marine industry, and how they are applied to online exhibitions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.12-24
• /
• 2018

This study was conducted in order to improve opening efficiency of the miniaturized large-scale net for anchovy boat seine gear to reduce the fleet size. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 150, 300 and 450 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the miniaturized large-scale net was as follows: the front part of the wing net, 8.7-13.3 m, 51-78%; the middle part of the wing net, 28.1-34.2 m, 55-67%; the entrance of the inside wing net, 31.3-38.5 m, 60-73%; the square and bosom, 22.7-29.6 m, 47-62%; the entrance of the body net, 20.9-26.4 m, 42-52%; the entrance of the bag net, 17.2-21 m, 72-89%; the flapper, 13.2-15.3 m, 78-83%; and the end of the bag net, 13.2-15.7 m, 72-75%. By connecting the net pendants with the front part of the wing net, the opening of the front part of the wing net was significantly improved compared to the traditional gear, which ensured both the wing net and the inside wing net with a normal net height. This, in turn, increased the efficiency of herding. The height of the body and bag nets was also higher than that of the tradition gear. In particular, the body net attached to the gear significantly improved the pocket shape of the gear and reduced the number of fish that were caught and escaped from the bag net, which increased the rate of fishing. The tension of towing nets was measured approximately between 2,958 and 7,110 kg, which indicates that the fleet can tow nets with 350 ps, the standard engine horse power. The fishing operation time was shortened compared with of the existent net, and the large-scale buoy attachment operation was also possible to operate the ship without fish detecting boat.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.1-11
• /
• 2018

This study was conducted in order to improve fishing gear for existent net of the anchovy boat seine. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 100, 300, and 500 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the existent net was as follows: the middle part of the wing net, 12.9-26.6 m, 19-39%; the entrance of the inside wing net, 23.3-35.3 m, 40-60%; the square and bosom, 18.4-24.2 m, 37-49%; the entrance of the bag net, 19.0-23.3 m, 79-96%; the flapper, 13.2-15.3 m, 142-161%; and the end of the bag net, 13.2-15.7 m, 51-61%. The actual net opening of each part of the existent nets used in this study was lower than that of the design net height, due to the low net height of the wing net and the inside wing net, it limited a range of the net height of the square and bosom. The opening of the entrance of the bag net caused the net pocket shape and inflated some parts of the nets. The tension of towing nets was measured between 4.4 and 11.0 tons, and it is necessary to reduce the structure and improve the structure of the bag net.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.143-149
• /
• 2024

The production and procurement of shipbuilding and offshore equipment is an important competitive factor in the shipbuilding and offshore industry. Recently, ICT-based digital technology has been rapidly applied to the manufacturing industry following the Fourth Industrial Revolution. Under the digital transformation, real-time data interface technology based on SCM (Supply Chain Management) is emerging as an important tool to improve the efficiency of the equipment manufacturing process. In this study, the characteristics and advantages and disadvantages of interface technologies of web-based data interface technologies were compared and analyzed. The performance was compared between theoretical evaluation based on technical features and practical application cases. As a result, it was confirmed that GraphQL is useful for selective data processing, but there is a problem with optimization, and REST API has a problem with receiving data due to a fixed data structure. Therefore, this study aims to suggest ways to utilize and optimize these data interface technologies.

• Ocean Systems Engineering
• /
• v.9 no.3
• /
• pp.329-347
• /
• 2019

The shipbuilding industry is characterized by order production, and various processes are performed simultaneously in the construction of ships. Therefore, effective management of the production process and productivity improvement form important key factors in the industry. For decades, researchers and process managers have attempted to improve processes by using business process analysis (BPA). However, conventional BPA is time-consuming, expensive, and mainly based on subjective results generated by employees, which may not always correspond to the actual conditions. This paper proposes a method to improve the production process of offshore plant modules by analysing the process mining data obtained from the shipbuilding industry. Process mining uses information accumulated from the system-provided event logs to generate a process model and determine the values hidden within the process. The discovered process is visualized as a process model. Subsequently, alternatives are proposed by brainstorming problems (such as bottlenecks or idle time) in the process. The results of this study can aid in productivity improvement (idle time or bottleneck reduction in the production process) in conjunction with a six-sigma technique or ERP system. In future, it is necessary to study the standardization of the module production processes and development of the process monitoring system.