• 제목/요약/키워드: Ship-Radiated Noise

검색결과 76건 처리시간 0.02초

샌드위치 패널을 이용한 함정탑재장비용 방진 베이스 개발 (Development of the Anti-vibration Base for the Onboard Equipment of the Naval Vessel Using Sandwitch Panel)

  • 한형석;이경현;박성호;위양현
    • 한국소음진동공학회논문집
    • /
    • 제26권4호
    • /
    • pp.365-374
    • /
    • 2016
  • The underwater radiated noise can be reduced by decreasing the structure borne noise of the on-board equipment. Therefore, the structure borne noise of the onborad installed equipment is strongly restricted by ROK navy with MIL-Std 740-2. Usually, the vibration transmissibility from the equipment to the hull of the ship is dependent on its mount characteristics. Even though the double mount structure is proper to apply for ship board application rather than single mount, it is not widely applied due to the weight and volume resriction of the ship. Therefore, in this research, the base using sandwitch panel which can act as double mount structure is suggested and its noise reduction capacity is verified with analytic calculation as well as experiment.

M&S 기반 함정음향 시험평가 개념 (A Concept on the M&S-based T&E for Ship Acoustics)

  • 조창봉
    • 한국군사과학기술학회지
    • /
    • 제7권1호
    • /
    • pp.24-33
    • /
    • 2004
  • Recently, ship acoustics takes more important role in acoustic stealth and classification of underwater targets. In this paper, a theoretical concept is proposed for M&S-based test and evaluation of ship acoustics. The concept is based on two different approaches: on Top-Down method which emphasizes the survivability of the ship and on Bottom-Up method which considers acoustic characteristics of the ship-equipments. In order to improve the effectiveness of M&S-based T&E for ship acoustics, it is recommended in this paper to compromise the two approaches as adequate.

압축 센싱 기법을 자기상관 필터뱅크 방식에 적용한 광대역 프로펠러 소음 추정 기법 연구 (Study on Hidden Period Estimation in Propeller Noise by Applying Compressed Sensing to Auto-Correlation and Filter-Bank Structure)

  • 임준석;편용국;홍우영
    • 한국통신학회논문지
    • /
    • 제40권12호
    • /
    • pp.2476-2484
    • /
    • 2015
  • 배의 방사 소음을 이용하여 배를 탐지하는 데는 협대역 톤을 추정하는 방법과 광대역 신호에 내포된 주기성 신호를 추정하는 방법이 있다. 그 중에서 광대역 신호에 내포된 주기성 신호를 추정하는 방법을 데몬 신호 처리법이라고 한다. 본 논문에서는 데몬 처리를 위해서 압출 센싱 기법을 자기 상관기 필터 뱅크에 적용한 기법을 제안한다. 그리고 합성된 신호와 실제 신호를 바탕으로 기존 방법들과 비교하여 기본 주파수 신호를 우수하게 추정할 뿐만 아니라 기존 방법에 비해서 짧은 신호 길이를 사용해도 우수한 성분 추정 성능을 할 수 있음을 보인다.

위상차를 갖는 다중 가진 시 구조물의 방사효율 특성 해석 (Analysis of the Acoustic Radiation Efficiency on Multi-excitation System with Different Phase)

  • 강명환;이종주;한승진;배수룡;정우진
    • 한국소음진동공학회논문집
    • /
    • 제24권12호
    • /
    • pp.992-998
    • /
    • 2014
  • Acoustic radiation efficiency is one of the important factors in the prediction of underwater radiated noise of ships. A ship has much equipment to operate successful mission in a ship. Most of equipment is running simultaneously as multi-excitation and becomes the source of underwater radiated noise. In many cases of multi-excitation, phase difference between multi-excitation is not considered. Because vibration response under multi-excitation is the vector sum of each single excitation, acoustic radiation efficiency based on surface velocity field can be affected by phase of excitation. In this study, acoustic radiation efficiency of a plate on air and a stiffened cylindrical model in water under multi-excitation with phase difference is investigated.

자기상관과 필터뱅크 방식을 적용한 광대역 프로펠러 소음 추정 기법 연구 (Hidden Period Estimation in the Broad Band Propeller Noise Using Auto-Correlation and Filter-Bank Structure)

  • 임준석;홍우영;편용국
    • 한국통신학회논문지
    • /
    • 제39B권8호
    • /
    • pp.538-543
    • /
    • 2014
  • 배의 방사 소음을 이용하여 배를 탐지하는 데는 협대역 톤을 추정하는 방법과 광대역 신호에 내포된 주기성 신호를 추정하는 방법이 있다. 그 중에서 광대역 신호에 내포된 주기성 신호를 추정하는 방법을 데몬 신호 처리법이라고 한다. 본 논문에서는 데몬 처리를 위해서 자기 상관기를 적용한 필터 뱅크를 기법을 제안한다. 그리고 합성된 신호와 실제 신호를 바탕으로 기존 방법들과 비교하여 기본 주파수 신호를 우수하게 추정할 뿐만 아니라 여러 고차 하모닉 성분들도 잘 추정하여 기본 주파수 추정의 신뢰성도 높일 수 있음을 보인다.

선박 추진시스템 유동 소음원 상대적 기여도 분석 (Investigation on relative contribution of flow noise sources of ship propulsion system)

  • 하준범;구가람;정철웅;설한신;정홍석;정민석
    • 한국음향학회지
    • /
    • 제41권3호
    • /
    • pp.268-277
    • /
    • 2022
  • 본 논문에서는 KVLCC2 선체 축소모형에 설치된 추진시스템의 세부 구성품별 유동 소음원을 분석하였으며, 각각의 소음원이 수중방사소음에 미치는 영향에 대해 정량적으로 분석하였다. 수치 해석 영역은 실험 결과와의 비교를 위하여 선박해양플랜트연구소 대형 캐비테이션 터널의 시험부와 동일하게 설정하였다. 먼저 유동장내 소음원을 정확하게 모사하기 위하여 고정밀 해석기법인 비압축성 다상 Delayed Detached Eddy Simulation 방법을 적용하였고, 유동해석 결과를 기반으로 Ffowcs Williams and Hawkings 적분방정식을 사용하여 수중방사소음을 예측하였으며, 터널 실험결과와의 비교를 통해 해석절차의 유효성을 확인하였다. 추진시스템의 유동 소음원별 영향을 정량적으로 비교하기 위하여 추진기 날개 끝-와류 공동, 날개 표면 그리고 방향타 표면을 소음원 영역으로 선정하였으며, 음압과 파워 스펙트럼 밀도, 음향 파워를 비교하였다. 공동에 의한 홀극 소음원의 기여도가 추진기 날개 및 방향타에 의한 쌍극 소음원에 비해 수중방사소음에 크게 기여하였으며, 추진기 후류의 영향으로 방향타에 의한 기여도가 추진기 보다 더 크게 발생함을 확인하였다.

딥러닝을 이용한 DEMON 그램 주파수선 추출 기법 연구 (A study on DEMONgram frequency line extraction method using deep learning)

  • 신원식;권혁종;설호석;신원;고현석;송택렬;김다솔;최강훈;최지웅
    • 한국음향학회지
    • /
    • 제43권1호
    • /
    • pp.78-88
    • /
    • 2024
  • 수중 소음 측정이 가능한 수동 소나에 수신된 선박 방사소음은 Detection of Envelope Modulation on Noise(DEMON) 분석으로 얻은 선박 정보를 사용하여 선박 식별과 분류가 가능하다. 하지만 낮은 신호대잡음비(Signal-to-Noise Ratio, SNR) 환경에서는 DEMON 그램 내 선박 정보가 담겨있는 표적 주파수선을 분석 및 파악하는데 어려움이 발생한다. 본 논문에서는 낮은 SNR 환경에서 보다 정확한 표적 식별을 위해 딥러닝 기법 중 의미론적 분할을 사용하여 표적 주파수선들을 추출하는 연구를 수행하였다. SNR과 기본 주파수를 변경시키며 생성한 모의 DEMON 그램 데이터를 사용하여 의미론적 분할 모델인 U-Net, UNet++, DeepLabv3+를 학습 후 평가하였고, 학습된 모델들을 이용하여 캐나다 조지아 해협에서 측정한 선박 방사소음 데이터셋인 DeepShip으로 제작한 DEMON 그램 예측 성능을 비교하였다. 모의 DEMON 그램으로 학습된 모델을 평가한 결과 U-Net이 성능이 가장 높았으며, DeepShip으로 만든 DEMON 그램의 표적 주파수선을 어느 정도 추출할 수 있는 것을 확인하였다.

유한요소/경계요소 연성해석을 통한 수중 구조기인소음 해석 (Underwater Structure-Borne Noise Analysis Using Finite Element/Boundary Element Coupled Approach)

  • 이두호;김현실;김봉기;이성현
    • 대한기계학회논문집A
    • /
    • 제36권7호
    • /
    • pp.789-796
    • /
    • 2012
  • 함정의 수중방사소음은 그 해석의 어려움이나 정확성에 있어서 매우 관심이 큰 문제이다. 본 논문에서는 구조물의 수중방사소음을 해석하기 위하여 유한요소/경계요소 연성해석법을 제안하였다. 제안된 방법은 헤름홀츠방정식에 대한 Burton-Miller 적분방정식에 기반하는 부가수 질량과 감쇠행렬을 이용하여 구조물의 구조-유체 연성응답을 해석하고 계산된 구조물의 응답으로부터 수중방사소음을 계산하는 순차적인 방법이다. 구조-유체연성작용의 구조해석은 상용소프트웨어인 MSC/NASTRAN 에 구조-유체연성효과 행렬을 추가하여 해석하는 방법으로 이루어졌고, 수중방사소음의 경우는 전용 소프트웨어를 개발하였다. 개발된 수중방사소음 해석법을 간단한 예제를 통하여 그 특성을 살피고, 실제 함정의 받침대 진동에 의한 수중방사소음의 계산에 적용하여 그 유용성을 보였다.

A Study on the Noise and Vibration Analysis of 200kW PMSM for Electric Propulsion Ship

  • Cho, Yang-Uk;Kang, Gyu-Hong
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제3권4호
    • /
    • pp.389-393
    • /
    • 2014
  • This paper presents one of the methods for design to reduce the noise and vibration of 200kW motor for electric propulsion ship. One of the important factors affecting vibration of the motor is the resonance. The natural frequency and natural mode of the 200kW motor is analyzed by using FEM tool and impact test equipment to avoid the resonance. Also, compare FEM result with impact test result to make a reliable FE model of 200kW motor. In order to find out the effect of the noise and vibration of the motor by electromagnetic excitation force, conduct electromagnetic-structure coupled analysis. These characteristics are much useful to design 200kW motor for electric propulsion ship.

전달함수법을 이용한 SWATH선의 수중 음향 방사 해석 (Analysis of Underwater Acoustic Radiation of SWATH vessel using Transfer Function Method)

  • 김재호
    • 한국군사과학기술학회지
    • /
    • 제6권2호
    • /
    • pp.20-34
    • /
    • 2003
  • The good sea-keeping capability of the SWATH(Small Waterplane Area Twin Hull) ship has been attractive for research or surveillance vessels. Especially, for the naval ships accomplishing the underwater acoustic missions, it is necessary to access and minimize the underwater radiated noise level generated by the ships. Therefore, acoustic signature management and control are very important topics for these vessels. Underwater radiation pattern in the low frequency range is dominated by the tonals from the vibration of onboard machinery. In this work, the radiated noise level generated by the propulsion machine in the submerged hull is predicted using the transfer function technique and the hull transfer function for the submerged hull is determined by analyzing the longitudinal/circumferential stiffened infinitely long cylindrical shell and considering the empirical database of the previous vessels. It is confirmed that the transfer function technique can give useful information for identifying the noise source and estimating its contribution to the total radiatied noise level.