• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.193-196
• /
• 2006

프로펠러 회전면에서의 반류분포는 주로 모형시험에 의해서 규명되어 왔다. 이렇게 축적된 데이터베이스를 통해 선박의 기하학적 형상정보와 반류분포 사이의 입출력관계를 모델링할 수 있다. 면 선박 초기설계시 유사선종의 설계에 도움이 된다. 본 연구에서는 이들 입출력 사이의 관계를 뉴로퍼지시스템으로 모델링하고 학습한 후 새로운 입력에 대한 출력값의 검토를 통해 그 유용성을 확인한다.

• 대한조선학회지
• /
• 제26권4호
• /
• pp.3-13
• /
• 1989

선박이 제한수로에서 임계속도로 항진하면 solitons라는 특이한 파가 발생하여 선속보다 빠른 속도로 앞으로 전파되어 나간다. 이로인하여 선박은 급격히 증가된 조파저항을 받게되며, 또한 심한 침하와 종경사가 발생하여 때로는 수로바닥에 좌초하기도 한다. 이 문제는 선형이론으로 설명할 수 없는 비선형형상으로, 본 논문에서는 포텐셜이론에 근거하여 세장선에 대한 Matched Asymptotic Expansion 기법을 적용하여 파는 Kadomtsev-Petviashvili 방정식으로 표현할 수 있음을 보였다. 이 방정식은 선수부의 soliton 발생과 전파를, 그리고 선미부의 3차원 파를 예측하여 실험에서 발견한 현상을 반영한다. 수치계산은 soliton 발생과정을 잘 보여주고 있으며, 실험치에 유사한 조파저항, 침하 및 종경사를 제공한다.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.60-65
• /
• 1996

1축 1타선에 대한 조종운동 수학모델은 통상적인 경우 이미 확립되어 널리 사용되고 있다. 또한 저속이나 천수역에서의 조종운동계산에도 응용되고, 새로운 국면의 조종운동 해석에도 기존의 조종수학 모델이 근간이 되고 있다. 한편 2축 2타선과 같은 특수선형에 대해서는 Lee 등에 의한 상세한 구속모형시험 결과로 그 특성이 알려지게 되었고, 1축 1타를 기본으로 하는 기존 수학모델에 약간의 수정을 가함으로서 충분이 조종운동을 추정할 수 있음을 보였다. 본 논문에서는 2축 2타선에 대한 Propeller Effective Wake($1-w_p$)와 유효중립타각 (Effective Neutral Rudder Angle) ${\delta}_R$에 대한 추정모델을 제안하고, Hull의 유체력에 관해서도 Inoue의 추정식을 사용하여, 초기설계단계에서 선박의 주요치수, Propeller 및 타 제원만으로서 개략적인 2축 2타선의 조종운동 계산을 가능하도록 하였다. 이 추정법에 의한 조종운동 계산결과를 엄밀한 구속모형 시험 Data에 의한 계산과 비교하여, 본 논문에서 제안된 추정법의 유용성을 검증하였다.

• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.136-147
• /
• 2009

The computational prediction method of speed performance for a ship with vortex generators is proposed. The Reynolds averaged Navier-Stokes equation has been solved together with the application of Reynolds stress turbulence model. The computations are carried out under identical conditions of the experimental method, i.e., towing and self-propulsion calculations without and with vortex generators. The speed performance in full scale is obtained through analyzing the computational results in model scale according to the revised model-ship performance analysis method of ITTC'78 with considering the vortex generators into account. The characteristics of resistance, self-propulsion and wake characteristics on the propeller plane are investigated. The proposed computational prediction clearly shows the effect of vortex generators and can be applicable to the design tool for vortex generators.

• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.551-563
• /
• 2007

Numerical analysis for flow characteristics of a twin skeg container ship was carried out according to skeg vertical angles($0^{\circ}$, $10^{\circ}$, $20^{\circ}$) and skeg distances(16m, 20m, 24m) by using a commercial CFD code, FLUENT. Computed: pressure distributions, wake distributions and resistance coefficients have been compared with experimental and WAVIS results carried out by MOERI. Flow characteristics from numerical analysis such as nominal wake fractions, wake distribution and directions of the transverse vectors give good agreement with WAVIS results, even though there are quantitative discrepancy comparing with experimental measurements at the propeller plane. It is found that the better resistance performance can be obtained with the increase of the skeg vertical angle and the decrease of the skeg distance, which are mainly caused by viscous pressure resistance due to the skeg form and pressure recovery around the skeg. In addition, a vertical angle of the skeg gives more effect to the resistance coefficient comparing with the skeg distance. On the basis of results of the present study, it shows that numerical analysis using the commercial code, FLUENT, is useful and efficient tool for the evaluation of the complex stern hull form with twin-skegs.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.453-459
• /
• 2009

The DSME guide plate(GP) has been developed with the target to improve the cavitation and vibration performance when used with discharging cooling water around the outlet of LNG carrier. It was proven that it could as well be applied as a powerful wake control device on its own, even without discharging cooling water. However, it has to be taken into account that it inevitably results in speed loss. This study shows the possibility to design a GP which simultaneously improves both vibration and speed performance. The study intends to outline how to design the preliminary GP configurations from both the vibration and the speed performance points of view. Further, the study offers design guidance for the hull form and the propeller when adapting GP as a wake control device.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.15-22
• /
• 2011

In this paper, cavitation patterns of model tests were compared with those of full-scale measurement for a propeller of crude oil carrier which was suffered from erosions on suction side of blade tip region. Cavitation tests were performed at design and ballast draft using model and full scale nominal wakes. A model ship and wire mesh method was used for the simulation of wake patterns of model nominal wakes. For the prediction of full-scale wake patterns, a RANS solver(Fluent 6.3) was used and wire mesh method was used for the simulation of the full scale wakes. Comparison results show that cavitation patterns using predicted full-scale wake patterns are closer to cavitation patterns of full-scale measurement at ballast draft condition. Also, cloud cavitations were observed on the position of eroded area at both full-scale measurement and cavitation tests using simulated full-scale wake patterns.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.109-116
• /
• 2019

This paper carried out numerical analysis for estimating the propulsion performance of the model scale ONRT benchmark model of'Tokyo 2015 a workshop on CFD'. The method reflecting the scale effect of ITTC'78 method and form factor were used to compare the estimates of the effective wake ratio of full-scale. The numerical calculation was performed with Siemens's Star-CCM+, compared with IIHR model tests and the numerical analysis results of other research institutes, showing good agreement. In the case of an open stern and twin skeg ship, the validity of the ITTC'78 method can be confirmed by assuming that the effective wake ratio estimated from the numerical analysis results of model scale is similar to the effective wake ratio of full-scale.

• 한국항해학회지
• /
• 제21권1호
• /
• pp.103-108
• /
• 1997

Mathematical model of maneuvering motion for a single-screw single-rudder ship is established and several applications to the special situations of maneuvering are attempted. While, the mathematical model for twin-screw twin-rudder ship is not presented so much, because that type of ship is not popular. Lee et al. have examined the characteristics of such ship by captive model tests in 1988, in Japan. This paper proposes new mathematical models for propeller effective wake (1 -${\omega}_p$) and effective neutral rudder angle ${delta}_R$ in the case of twin-screw twin-rudder ship. And some maneuvering motionse are calculated with proposed models and compared with exact simulations.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.361-369
• /
• 2008

The optimized distance between skegs and angle of the skeg for a standard twin-skeg type LNG carrier were presented using the CFD and model tests. The evaluation method of self-propulsion performance was derived based on the results of CFD and confirmed the validity through model tests. The analyses to assess self-propulsion performance using CFD were shown by flow line patterns on the skeg surface, nominal wake distribution in the propeller plane and the evaluation for flow balance around stern skegs. The optimized ship that was applied to the optimized two design parameters in stern skeg arrangement for target ship was derived in this work. Finally speed performance of mother ship which is existing ship and optimized ship were compared through CFD and model tests. And the usefulness about the evaluation method of self-propulsion performance was reconfirmed.