• 한국소음진동공학회논문집
• /
• 제17권7호
• /
• pp.572-578
• /
• 2007

Two stroke low speed diesel engines are widely used for marine propulsion or as power plant prime mover. These engines have many merits which includes higher thermal efficiency, mobility and durability. Yet various annoying vibrations occur sometimes in ships or at the plant itself. Of these vibrations, torsional vibration is very important and dictates a careful investigation during the engme's initial design stage for safe operation. With the rule and limit on torsional vibration in place, shaft strength fatigue due to torsional vibration however demands further analysis which possibly can be incorporated in the classification societies' rule and limit. In addition, the shaft's torsional vibration stresses can be calculated equivalently from accumulated fatigue cycles number due to transient torsional vibration in time domain. In this paper, authors suggest a new estimation method combined with Palmgren-Miner equation. A 6S70MC-C ($25,320ps{\times}91rpm$) engine for ship propulsion was selected as a case study. Angular velocity was measured, instead of shaft's strain, for simplified measurement and it was converted to torsional vibration stress for accumulated fatigue cycle numbers in shafting life time. Likewise, the accumulated fatigue calculation was compared with shaft fatigue strength limit. This new method can be further realized and confirmed in ship with two stroke low speed diesel engine.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• 해양환경안전학회지
• /
• 제15권1호
• /
• pp.49-55
• /
• 2009

우리나라는 매년 최소 3${\sim}$4개 정도의 태풍의 영향을 받고 있으며, 이러한 태풍은 강한 바람과 많은 비를 동반하여 막대한 재산피해와 인명피해를 가져왔다. 특히, 태풍 매미는 기록적인 강풍과 높은 파도를 동반하여 피항지에 묘박중인 선박들과 부두에 계류중인 선박들이 침몰, 좌초, 충돌하는 등 많은 해양사고를 유발시켰다. 태풍의 내습이 예상되면 선박들은 태풍의 예상 진로에서 멀리 벗어나거나 안전한 피항지를 선택하여 투묘를 실시하고 있다. 하지만, 투묘에 대한 사항이나 투묘 후 선박의 안전에 대한 판단은 운항자의 경험에 의존하고 있는 실정이다. 따라서, 본 논문에서는 실습선 한바다호를 대상으로 선체에 작용하는 외력과 외력에 대한 대항력을 상호 비교 분석함으로써 선박의 묘박 안전성을 정량적으로 평가하였고, 이를 바탕으로 주묘 한계풍속, 선박에서의 안전대책, 단계별 조치사항 등에 대한 묘박 매뉴얼을 개발하였다.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.396-403
• /
• 2011

The concept of an air lubrication has long been an object of attention since it can be utilized to reduce the frictional resistance, and what is more, it is eco-friendly. The present study examines the basic characteristics of an air cavity with intention of applying the air lubrication technology to the reduction of the resistance of a ship without excessive power increment. For the purpose, an air cavity was created at the bottom of a flat plate by injecting air behind a backward step and the hydrodynamic properties of the air cavity and the surrounding flow has been investigated experimentally and numerically. The influence of the step height and the air flow rate have been more carefully studied since they are presumed to be the main parameters affecting the characteristics of an air cavity. The results indicates that the shapes of the air cavities attached on the flat plate become "U" or "V" type depending on the incoming flow velocity and air flow rate. The study also confirms that the length of the air cavity increases with increase in air flow rate but there is a certain critical limit in the flow rate above which increase in the air cavity length is no more evident.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.356-363
• /
• 2015

Microbubbles moving in the turbulent boundary layer are visualized and investigated in the point of frictional drag reduction. The turbulent boundary layer is formed beneath the surface of the 2-D flat plate located in the tunnel test section. The microbubble generator produces mean bubble diameter of 30 – 50 μm. To capture the micro-bubbles passing through the tiny measurement area of 5.6 mm² to 200 mm², the shadowgraphy system is employed appropriately to illuminate bubbles. The velocity field of bubbles reveals that Reynolds stress is reduced in the boundary layer by microbubbles’ activity. To understand the contribution of microbubbles to the drag reduction rate more, much smaller field-of-view is required to visualize the bubble behaviors and to find the 2-D void fraction in the inner boundary layer.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.20-29
• /
• 2010

The complicated flow characteristics of upper propeller wake influenced by hull wake are investigated in detail in the present study. A two-frame PIV (particle image velocimetry) technique was employed to visualize the upper propeller wake region. As the upper hull wake affects strongly propeller inflow, upper propeller wake shows much unstable vortical behavior, especially in the tip vortices. Velocity field measurements were conducted in a cavitation tunnel with a simulated hull wake. Generally, the hull wake generated by the hull of a marine ship may cause different loading distributions on the propeller blade in both upper and lower propeller planes. The unstable upper propeller wake caused by the ship's hull is expressed in terms of turbulent kinetic energy (TKE) and is identified by using the proper orthogonal decomposition (POD) method to characterize the coherent flow structure in it. Instabilities appeared in the eigen functions higher than the second one, giving unsteadiness to the downstream flow characteristics. The first eigen mode would be useful to find out the tip vortex positions immersed in the unstable downstream region.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.246-252
• /
• 2014

본논문은 150마력급 선내형 소형 워터제트 추진시스템 개발에 대한 연구이다. 워터제트는 흡입부, 임펠러, 디퓨저(공기확산기), 후진부와 메인 샤프트로 구성되어 있다. 워터제트의 구성품은 사형 주조후 정밀가공을 거쳐 개발하였다. 워터제트 추진기관의 개발은 각각의 부품에 대한 설계-제작-검사의 과정을 거쳐 최종 완성하였으며, 육상 시험 풀에서는 선체의 이동 없이 워터제트의 펌프 특성을 확인한 결과, 최대 37m/s의 유속과 0.29m3/s의 유량을 배출할 수 있는 성능을 확보하였다. 본 연구에서 개발된 워터제트 추진장치를 설치한 21ft 시험선을 사용하여 실증 연구를 수행하였다. 그 결과, 국내 연안에서 시험시 선체무게와 엔진등 기타 부수적인 무게가 대략 1.2ton 가량 이였으며 이 상태에서 엔진회전수 3,700rpm에서 최대시속 45km/h의 운항속도를 기록하였다.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.501-509
• /
• 2010

해상크레인은 크레인을 탑재한 선박으로서, 조선소에서 대형 블록이나 구조물의 탑재 및 해상 운송 작업에 사용된다. 본 논문에서는 해상크레인과 중량물의 전후 동요(Surge), 상하 동요(Heave), 종 동요(Pitch)에 대한 정적/동적거동을 분석하였다. 이 때, 유연 다물체계 동역학을 적용하여 해상크레인의 붐(boom)을 탄성으로 고려하였으며, 플로팅 프레임(floating frame)과 노드 좌표(nodal coordinates)를 사용하였다. 질량 행렬, 탄성 강성 행렬, 2 차 속도 벡터, 일반화 좌표 방향으로 작용하는 외력 등을 고려하여 모든 운동이 연성된 비선형 운동 방정식을 구성하였다. 외력으로는 비선형 유체정역학 힘, 선형화된 유체동역학 힘, wire rope 힘, 계류력이 고려되었다. 수치 해석을 위해 Hilber-Hughes-Taylor 방법을 비선형 운동방정식에 적용하였다. 정적 거동 분석을 통한 정적 평형 자세를 고려한 경우와 고려하지 않은 경우에 대해 결과를 비교하였으며, 수치 해석 방법에 대한 정적/동적 거동 분석 결과를 비교하였다.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1450-1456
• /
• 2015

송신 안테나는 약 53m 높이에 설치하고, 수신 안테나는 약 6m 높이에 설치하였으며, 해안국에서 700m부터 약 20km까지의 전파 경로 구간에서 $5{\pm}1m/s$의 속도로 이동하면서 150.0625MHz의 단일 주파수를 사용하여 수신신호의 크기를 측정하는 시험을 수행하였다. 본 논문에서는 실해역 측정 데이터를 입력으로 하여 최소자승법오차 방법을 이용하여 측정한 전달경로 구간에서 경로감쇠지수가 3.79가 됨을 추정하였으며, 추정한 경로감쇠지수는 해상 VHF 채널(100MHz)에 대해 ITU-R P.1546-4 Annex 2의 측정 결과와 유사한 결과를 보인다. 추정한 경로감쇠 지수값은 우리나라 남해안의 해상통신에서 하절기의 경로감쇠 지수 예측값으로 사용할 수 있을 것이다.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.217-223
• /
• 2013

This paper presents the wet damping estimation of the segmented hull model using the random decrement technique together with the continuous wavelet transform. The tested 16 sea states are grouped together based on the speed of the ship in order to figure out the possible influence of the ship speed on the damping ratio. The measured time histories of vertical bending moment for each tested sea state were processed with random decrement technique to derive the free decay signal, from which the damping ratios are estimated. Also, the autocorrelation functions of the filtered signal were calculated and comparison was made with the free decay signal obtained from the random decrement technique. Then the wet damping ratios for each sea state group, as well as precise wet natural frequencies, are estimated by using continuous wavelet transform. It turned out that the wet natural frequencies derived from the measured signal did not show any significant discrepancy compared with those obtained by wet hammering test, whereas the damping ratio did. It was considered that the discrepancy of the damping ratio between in calm and moving water may be attributed to the viscous effects caused by dramatically different flow pattern and relative velocity between the vibrating structure and surrounding fluid particles.