• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.211-214
• /
• 2007

In this paper, we have designed microstrip antenna if 800[MHz] band It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had U-shaped feeding structure at a rectangular patch And ground or feeding structure used between dielectric constant(${\varepsilon}_T$ = 2.1), patch or feeding structure used between dielectric constant(${\varepsilon}_T$ =1). So it used a duplex resonance effect Designed frequency bandwith(V5WR 2:1) if the antenna showed good characteristic of $780[MHz]{\sim}1.83[GHz]$ to 2.61[GHz]. Also the E-plan and H-plan all profit 9.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan and H-plan $60^{\circ}$ to be improved.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.211-216
• /
• 2014

In this paper, high throughput method is studied to provide floating objects with broadband service as ship by using satellite. In recent, satellite broadcastings standard is based on DVB-S3 for communication service using wireless device on navigation communication by satellite. LDPC codes are iterative coding algorithm proposed in DVB-S3. In this paper, FTN technique is applied to LDPC codes with 8-PSK modulation and then present the method to alleviate performance degradation due to FTN through BICM-ID. BICM-ID is the method to improve performance by calculating a new LLR from hard-decision value of decoder output. DVB-S2 system with 8-PSK modulation and FTN technique based on iterative decoding had a better performance than DVB-S2 with 8-PSK modulation and FTN technique over Gaussian channels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.307-313
• /
• 2022

As the development of renewable energy expands internationally to cope with global warming and climate change, the share of wind power generation has been gradually increasing. Although wind farms can produce electric power for 24 h a day compared to solar power plants, Their interfere with the operation of nearby radars or communication equipment must be analyzed because large-scale wind power turbines are installed. This study analyzed whether a land radio station can receive sufficient signals when a ship sailing outside the offshore wind farm transmits distress signals on the VHF band. Based on the geographic information system digital map around the target area, wind turbine CAD model, and wind farm layout, the area of interest and wind farm were modeled to enable numerical analysis. Among the high frequency analysis techniques suitable for radio wave analysis in a wide area, a dedicated program applying physical optics (PO) and shooting and bouncing ray (SBR) techniques were used. Consequently, the land radio station could receive the electromagnetic field above the threshold of the VHF receiver when a ship outside the offshore wind farm transmitted a distress communication signal. When the line of sight between the ships and the land station are completely blocked, the strength of the received field decreases, but it is still above the threshold. Hence, although a wind farm is a huge complex, a land station can receive the electromagnetic field from the ship's VHF transmitter because the wave length of the VHF band is sufficiently long to have effects such as diffraction or reflection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2232-2240
• /
• 2017

IMO has made AIS and VHF mandatory for international sailing vessels through SOLAS, and korea if mandating specific vessels through the law for safety of vessels and the ship installation technology standards. However, due to various communication equipments and complicated usage method, malfunction occurs, and the response delay to the actual structure signal often causes human accidents. So recently, as a part of GMDSS modernization, maritime communication devices are attempting to interwork and integrate different types of marine communication system in order to construct a next generation maritime communication system. In this paper, we describe a technique to implement the DSC function by interlocking and integrating the AIS device and VHF. We will present the basis for achieving domestic technical standards and standardization through the linking algorithm of the data that can extract the ship information from AIS and utilize it the DSC function of VHF.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.799-804
• /
• 2008

In the paper, a dual-bandpass filter for ship's wireless LAN has proposed, which was designed by using step stub in compliance with 2.4 GHz and 5.2 GHz band The dual-bandpass filter can be designed by adjusting the sizes of the step stub in compliance with the frequency bands of 2.4 GHz and 5.2 GHz, which has the improved performance compared with the existing dual-bandpass filter. Furthermore, dual-bandpass filter using step stub has better efficiency. The measured results for the fabricated dual-bandpass filters agreed well with the simulated ones, and hence it was confirmed that the proposed design method is valid.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.481-487
• /
• 2008

Ship's wireless LAN was in the limelight as equipment of ease, cost reduction, various func tion al i ty. In the paper, a dual-bandpass filter for wireless LAN has proposed, which was designed by using dual-mode square loop resonator with square patch in compliance with 2.4 GHz and 5 GHz band of wireless LAN. The dual-bandpass filter could be designed by adjusting sizes of one perturbation element and three of reference elements in compliance with the frequency bands of 2.4 GHz and 5.8 GHz, Furthermore, new dual-bandpass filter was also designed by adjusting stopband of using open stubs in compliance with the frequency bands of 2.4 GHz and 5.2 GHz. The measured results for the fabricated dual-bandpass filters agreed well with the simulated ones, and hence, it was confirmed that the proposed design method is valid.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.517-529
• /
• 2011

In this paper, the parameters of the RTT (Radio Transmission Techniques) for SANET (Ship Ad-hoc NETwork), which is considered for the next generation maritime communication systems, are set up. A channel model has been analyzed based on the practical measured maritime wireless channel in VHF (Very-High Frequency) for SANET system. Also, by considering the frame structure including preamble, guard time and pilots for both single and multi-carrier systems, the BER (Bit Error Rate) performances are evaluated and analyzed in the aspects of channel compensation and channel coding techniques. Based on the simulation results, optimal modulation & coding schemes are suggested for SANET. That is, in single-carrier system by using differential modulation schemes, channel compensation is not necessary. However, channel coding is helpful to achieve additional gain. On the other hand, when 16-QAM modulation is employed in multi-carrier system, the implementation of both channel compensation and channel coding techniques show huge performance gain for various of K values, which are related to different maritime environments, and the rolling effects of wave.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.508-510
• /
• 2021

As the international standardization of 5G element technologies (e.g., 5G vertical satellite, direct communication functions between 5G NR (New Radio)-based devices) required not only in 5G verticals but also in autonomous navigation services is currently underway, it is expected to be utilized for autonomous navigation services while utilizing the economic size advantages of the scale of international standard-based solutions through 3GPP international standardization of marine communication services related to autonomous navigation vessels. In order to establish the ecosystem of ICT convergence market related to autonomous navigation vessels and to preoccupy core communication technology based on international standards, it is necessary to develop digital communication systems and gateways that have global compatibility, (2) secure core element technology based on next generation communication, and (3) promote international standardization for internationalization of related technologies. For this, data analysis and standard technology should be developed through service analysis by distance. Currently, the requirements for the operation of autonomous navigation vessels can be classified into three categories.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.477-484
• /
• 1999

With the development of electronic communication techniques, maritime communication system has been much changed. Since the maritime communications by the radio telegraph have been initiated, the GMDSS came into internationally effect for the life and safety at the sea from 1992, new maritime communication system has been constructed. The new systems have being implemented and applied to merchant ships over 300G/T (or safety of the life. But the annual reports show that most of casualties last 10 years happened to small ships, have been gradually increased. For the improvement of those circumstances, more effective SAR system and administrative plans should be executed. In this paper, we analyzed the maritime casualties last 10 years, maritime communication system, and SAR facilities in domestic. Through the result from the analysis, we discussed the current situations, summarized several conclusions for the developmental proposals.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.153-158
• /
• 2007

The INMARSAT is able to long range maritime communications that can not use for expensive charge in non-SOLAS ship. Therefore, international discussion for the question that replacements use of MF/HF band for maritime distress and safety communications in maritime. HF data communications system may be effectively utilized for SOLAS ships as well as for the existing non-SOLAS vessels including the fishing boats, which navigate A2 and A3 sea areas. The HF data communications may have various functions such as e-mail services, broadcasting services of up-to-date information related to marine safety, position reporting services, polling services etc. However, the present HF e-mail communications protocols have a problem of increasing calling redundancy as the number of channels in operation increases. This paper new protocol and communication sequence proposed in this submission establishes a proper radio link automatically and adaptively by taking channel traffic into account.