• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.378-384
• /
• 2014

Trawlers are divided into stern and side types by the method of shooting and hauling net, but the latter is difficult to find beside Korea. In East Sea of Korea, the side type used to be in early 2000's, but it improved to stern type because of its inefficient operating method. The aims of this paper is to make clear the stability of the side trawler in the East Sea, and then confirm whether it satisfy the IMO rule or not, the degree of the transverse inclining angle of the ship when hauling net at hull side. In results, the stability of the ship in initial inclining range satisfied the IMO rule and the domestic rule, but not satisfied those rule in over the range. The limit load of the ship that was coincide with the angle of beam end in hauling net at side was about 26 tons, 18 tons in normal sea condition and storm warning condition respectively. The transverse inclining angles of the ship in hauling net were much higher from 3.3 to 5.5 times than the longitudinal inclining angle of the stern trawler, although those angles were slightly changed with depending on the loading and sea condition.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.194-204
• /
• 2021

The research was analyzed the catch data of the five years (2016-2020) for six joint venture company tuna purse seiners in the Atlantic Ocean, with the aim of suggesting improvement measures for responsible and sustainable fishing according to changes of recommendation by International Commission for the Conservation of Atlantic Tuna (ICCAT) on the tropical tunas. In the last five years, the average catch of six tuna purse seiner gradually increased to 7,745 tons, 8,364 tons and 9,053 tons from 2016 to 2018, but decreased to 7,761 tons in 2019 and 6,214 tons in 2020. The reason for the decrease in fishing volume in 2019 and 2020 was the fluctuation of the formation of the cold water zone (22-23℃), and the total ICCAT convention area of FAD closure in January and February due to the expansion of the FAD closure area and poor free school catching during two months period, respectively. The analysis on fishing area showed that the percentage of fishing in the high sea was about 85% although the FAD closure area included the EEZ zone in coastal countries; the rise of the fishing license in coastal countries is also believed to be a factor. In order to overcome such situations and improve catching volume, it will be possible if excellent manpower is secured, school fishing is expanded, and the production of high value-added catch (purse seine special: PS).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.881-889
• /
• 2022

As interest in environmental pollution caused by ship emissions is increasing worldwide, many studies are being conducted on the development of systems that increase energy efficiency to reduce ship emissions. In order to test the energy management system controller driven in real time on a large ship, it is necessary to perform the test through the simulator. In this study, addresses were set for each signal according to Modbus TCP/IP so that each control system and energy management system could be linked, and the algorithm was configured according to the signal flow. In addition, the signal generator was designed and manufactured so that each controller could artificially generate the signal collected from the vessel. As a result of the simulator production and interlocking, it was confirmed that each controller operated in real time performed its role appropriately, and that the algorithm of the ship energy management system was properly applied.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.57-68
• /
• 2009

In automotive industries, reusability of product information is increasing through database construction of previous product data. The product data is stored by data quality management in product information systems. For naval ships, have the functional similarity by the ships of the same classification and class, that are built by series. Information of hull structures as well as embarked equipments are similar. So it would be effective to use database systems that are considered product information quality of previous ships in design and production processes. In this paper we discuss product information quality in database construction of naval ship product models. For this, we propose a basic concept and reference model for data quality verification. Based on this concept, A verification guideline is defined and it is applied for the case study of the digital naval ship which was built to the naval ship product model.

• Asia pacific journal of information systems
• /
• v.9 no.3
• /
• pp.47-73
• /
• 1999

Nowadays, the modeling of information systems have been enabled by various models and methodologies that are used for different purposes and perspectives upon the systems. The integrated modeling methodology that integrates these models and methodologies has become important concerns in system integration such as CIM and PDM. The primary objective of this paper is to propose a comprehensive integrated modeling methodology that integrates the OOIDEFO function model, OOIDEFO information model, node model, user interface model, and organization model for an effective analysis, design and implementation for system integration. This methodology covers the generic requirements of modeling methodology such as graphical notations, modeling processes, and abstraction mechanisms. Also, this methodology uses an 00 paradigm throughout the entire systems development life cycle. In order to prove the consistency and efficiency of the proposed methodology, the CIMS for ship production is modeled and prototyped.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.3
• /
• pp.300-311
• /
• 2024

This study quantitatively analyzes risks of industrial incidents to fisher on overseas tuna purse seiners and long liners. A Bayesian network is employed to analyze 478 cases of industrial incidents, comprising 401 cases from purse seiners and 77 cases from long liners, reported from 2019 to 2022. The highest risk of industrial incidents on purse seiners is attributed to diseases. Excluding diseases, risks are the highest during fishing: 5.31 times higher during catch handling, 2.05 times higher during maintenance, and 2.38 times higher during loading and unloading. The risk of industrial incidents caused by the hull is 9.50 times higher than those caused by fishing gear, 4.59 times higher than those caused by machinery, and 3.61 times higher than those caused by the caught fish. Among the types of industrial incidents, slips are the highest: 2.58 times higher than industrial incidents caused by being bump, 3.74 times higher than those caused by hit, and 3.94 times higher than those caused by imbalance and overexertion. For long liners, most industrial incidents are concentrated in diseases, with dental, musculoskeletal, skin, and respiratory diseases being the primary types of industrial incidents identified. This study aims to propose reduction measures for reducing the high-risk form of industrial incidents, specifically slips, and to present health management strategies for preventing diseases among fisher on overseas tuna fishing vessels. By addressing these aspects, this study seeks to contribute to the safety and sustainability of the overseas tuna fishing industry.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.65-72
• /
• 2018

This study analyzed the condition of marine accident and disaster rate of crew of Korean fishing vessels by vessel type, and checked the Australian safety management system and relevant regulation in Korea to suggest measures to build coastal/offshore fishing vessel safety management system in Korean coastal/offshore fishery. As a result, the power and production amount of Korean coastal/offshore fishing vessel is consistently decreasing while marine accident is increasing. Disaster rate of crew was higher than land industry, especially, the disaster rate of coastal/offshore fishing vessel was very high (100.0‰). Australia applies safety management system differed by vessel type and operation waters which fully considers the characteristics of pertinent vessel. The average accident rate of fishing vessels with gross tonnage over 20 tons among the Korean coastal/offshore fishing vessel was 13.6%, which was significantly higher than fishing vessels with gross tonnage below 20 tons (1.4%). Such result indicates it is urgent to implement safety management system to fishing vessel with gross tonnage over 20 tons and introduce fishing vessel safety supervisor. Establishing safety management system of coastal/offshore fishing vessel will contribute to consistent industrial development by achieving the general goal of reducing marine accident and spreading safety culture.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.170-178
• /
• 2024

This study aimed to quantitatively analyze the risk using data from 329 safety accidents that occurred in aquaculture fisheries management vessels over the recent five years (2018-2022). For quantitative risk analysis, the Bayesian network proposed by the International Maritime Organization (IMO) was used to analyze the risk level according to the fishing process and cause of safety accidents. Among the work processes, the fishing process was analyzed to have the highest risk, being 12.5 times that of the navigation, 2.7 times that of the maintenance, and 8.8 times that of the loading and unloading. Among the causes of accidents, the hull and working environment showed the highest risk, being 1.7 times that of fishing gear and equipment, 4.7 times that of machinery and equipment, and 9.4 times that of external environment. By quantitatively analyzing the safety accident risks for 64 combinations of these four work processes and four accident causes, this study provided fundamental data to reduce safety accidents occurring in aquaculture fisheries management vessels.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.2
• /
• pp.219-226
• /
• 2017

These days, the great part of design processes in the field of ship or offshore manufacturing are planned and implemented using the CAD system customized for shipbuilding companies. It means that all information for design and production could be extracted and reused at the other useful fields which need cost considerable time and efforts. The typical example is the field of welding material quantity evaluation which is demanded during the construction of ship or offshore structures. The proper evaluation of welding material to be used and the usage of them at the stage of schedule planning are mostly important to achieve the seamless process of production and costing in advance. This study is related to the calculation of welding length and needed welding material quantity at the stage of design completion utilizing the customized CAD system. The calculated welding material quantity would be classified according to welding posture, assembly stage, block, bevel and welding type so as to improve the accuracy of total cost evaluation. Moreover it is possible to predict the working time for welding operation and could be used efficiently for the cost management using the results of this research.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.2
• /
• pp.143-151
• /
• 2019

This study describes a method for analyzing log data generated in a process using process mining techniques. A system for collecting and analyzing a large amount of log data generated in the process of manufacturing an offshore plant piping material was constructed. The analyzed data was visualized through various methods. Through the analysis of the process model, it was evaluated whether the process performance was correctly input. Through the pattern analysis of the log data, it is possible to check beforehand whether the problem process occurred. In addition, we analyzed the process performance data of partner companies and identified the load of their processes. These data can be used as reference data for pipe production allocation. Real-time decision-making is required to cope with the various variances that arise in offshore plant production. To do this, we have built a system that can analyze the log data of real - time system and make decisions.