• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.65-70
• /
• 2006

Route Design & TSS(Traffic Separation Scheme) establishment are often used to improve the marine traffic safety in the heavy waters. There are several domestic and international route design guidelines, but there is no guideline of TSS design. So, TSS is designed by specialist's subjective opinion. Until now, when TSS is designed there are a few paper about the easiness effectiveness of marine accident, but there is no paper to design TSS guideline. This paper proposes the design guideline about TSS to improve the safety of navigation vessel by the quantitative assessment in the viewpoint of mariner.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.708-711
• /
• 2011

The Navy is in the process of developing a sonar-operation strategy to increase the effectiveness of underwater target seeking capability. HMS is the basic strategy to detect underwater targets. The advantages of HMS is that, it has a short preparation time to operate and can be always used regardless of sea conditions and weather. However, it is difficult to effectively detect underwater targets due to the interaction between marine environments and sonar-operations. During the research, the effectiveness of the HMS system's underwater target seeking capability was analyzed by integrating various search patterns and environment conditions into the simulation. In the simulation the ship target an evasive target within a set region. The simulation presented results for an effective searching methods of underwater targets. These research results can be used as foundation for advancing and improving the sonar operational tactics.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.383-390
• /
• 2013

After forming a institutional framework with specified in Maritime Safety Law(ex. Maritime Traffic Safety Law) on May 27th, 2009, The efforts for improving 'Maritime Traffic Safety Assessment Scheme(MTSA scheme)' have continued to the present. But there's no review with the comprehensive and systematic approach for proceeding acceleration step of MTSA scheme. At this point, this study analyzed current status and derived improvement measures using by 'PIP'OU model' which was designed for the comprehensive analysis in accordance with metaevaluation theory, like as question investigation and etc. Consequently, it mainly needs to improve 'Assessment Plan' domain and minimized the difference in views between concerned parties. This study is expected to be used to develop systematic maritime policy by proposing the order of priority in improvement matters.

• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.624-635
• /
• 2006

This paper applies simulated annealing algorithm to the problem of generating a plan for intra-block remarshalling with multiple transfer cranes. Intra-block remarshalling refers to the task of rearranging containers scattered around within a block into certain designated target areas of the block so that they can be efficiently loaded onto a ship. In generating a remarshalling plan, the predetermined container loading sequence should be considered carefully to avoid re-handlings that may delay the loading operations. In addition, the required time for the remarshalling operation itself should be minimized. A candidate solution in our search space specifies target locations of the containers to be rearranged. A candidate solution is evaluated by deriving a container moving plan and estimating the time needed to execute the plan using two cranes with minimum interference. Simulation experiments have shown that our method can generate efficient remarshalling plans in various situations.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.413-424
• /
• 2003

Up to now it has been widely conceived that mariner's compass was introduced to Europe from China via the Arabic people. But the proofs to support the above orthodox dissertation have not been found yet. In general it has been approved that the Chinese used the compass for navigation in the 11th century and European did in the 12th century. During the above period the communication between the Europe and the China was made only by the mediation of the Arabic people. But it is known that the beginning of Arabic people's compass usage was one century later than that of the European. It may raise a historical question about ‘was mariner's compass introduced to Europe from China via the Arabic people\ulcorner’ In this paper the authors tried to prove the simultaneity of the mariner's compass usage by the European with the Chinese by reviewing historical materials and modern researches. The results are as following; The first, there is a strong similarity in the evolving steps of compass appliance of both civilizations, such as from using magnetized and pivoted needle to fixing card thereto. Second, the Chinese and the European started to use the mariner's compass almost at the same time, and they developed it independently.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.180-185
• /
• 2014

Due to the larger and high-speed vessels recently constructed, output and speed of the engines for propulsion or power generation is increasing. These high-power and high-speed engine of the ship is becoming as a major contributor causing excessive noise and vibration. Other fittings as well as equipment installed on board, it makes equipment failure or other defect by resonance. This causes a lot of M/H(Man Hour) for repairs and the reliability of the company is invading even be negative because the clients give much comment. Thus, it's being studied for any fittings installed on board to maintain the safe operation and to prevent any problem during the performance in any operating conditions. In this study, it was investigated to solve these problems for the supports of the various fittings for easy installation-related support that each type of intensity and shape and manufacturing method using structural analysis program(DNV Nauticus Hull 3D Beam). Namely, it would be applied to the very large crude carriers in consideration of mechanics of materials of the support equipment by providing the fact that dynamics analysis of the structural characteristics of the equipment and the support of the production installation is easy and productivity can be high standards for geometry and thereby to simplify the analysis task to design changes at the same time and to minimize the reinforcement for the supports.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.415-425
• /
• 2016

This paper presents the results of a study on the control system for an underwater manipulator controlled by a master arm through LED communication. The underwater manipulator was designed to be actuated by electric motors with six degrees of freedom for operation in various underwater environments. The master arm, which can remotely control the manipulator, was designed with a structure similar to the manipulator for convenient control. An underwater LED communication system was developed to communicate between the master arm and underwater manipulator. An integrated control program was developed that included data conversion, monitoring, datalogging, and filtering. Some experiments were performed to verify the performance of the developed control system of the master arm, manipulator, and LED communication system, and the results are presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.2 s.25
• /
• pp.139-144
• /
• 2006

Recently, ships' average navigation speed become faster than before because of the increasing of high-speeds vessel including container ships and passenger-ferries. So, it is considered that the speed limit in the navigation channel in Korea isn't proper for vessel management in these days. Also, there is rare paper studies about the speed limit quantitatively and numerically, especially the speed limit is discussing continuously, as abrogation of Incheon Port's speed limit and alleviation of Gwang-yang Port's speed limit according to the requests by the navigating mariners. Consequently this paper deals with the effectiveness of speed limits using the Environmental Stress Model, after replay of the navigation traffic flow in the straight waterway using marine traffic flow simulation technique.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.179-184
• /
• 2021

In this paper, we propose the deep learning-based neural network model to predict bunker price. In the shipping industry, since fuel oil accounts for the largest portion of ship operation costs and its price is highly volatile, so companies can secure market competitiveness by making fuel oil purchasing decisions based on rational and scientific method. In this paper, short-term predictive analysis of HSFO 380CST in Singapore is conducted by using three recurrent neural network models like RNN, LSTM, and GRU. As a result, first, the forecasting performance of RNN models is better than LSTM and GRUs using long-term memory, and thus the predictive contribution of long-term information is low. Second, since the predictive performance of recurrent neural network models is superior to the previous studies using econometric models, it is confirmed that the recurrent neural network models should consider nonlinear properties of bunker price. The result of this paper will be helpful to improve the decision quality of bunker purchasing.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.289-299
• /
• 2019

Various sizes of ROVs are being utilized in offshore industrial, scientific, and military applications all around the world. Because of innovative developments in science and technology, image acquisition devices such as sonar devices and cameras have been reduced in size and their performance has been improved. Thus, we can expect better accuracy and higher resolution even in the case of exploration using a small ROV. The purpose of this paper is to prepare a standard procedure for the identification of unidentified hazardous materials found during the National Oceanographic Survey. In this paper, we propose an IDEF (Integrated DEFinition) method modeling technique to identify unidentified targets using a small ROV. In accordance with the proposed procedure, an ROV survey was carried out on target No.16 with a four-ton-class fishing boat as a support vessel on September 18th of 2018 in the sea near Daebu Island. Unidentified targets, which were not known by the multi-beam data obtained from the ship, could be identified as concrete pipes by analyzing the HD camera and high-resolution sonar images acquired by the ROV. The whole proposed procedure could be verified, and the survey with the small ROV required about 10 days to identify the target in one place.